Irrigation System Installation cost in Moore, OK
Moore, OK · updated August 2026
$3,900
Typical local cost
$1,900 – $8,800
Typical range
- per zone
- $400 – $950
- Permit
- It depends
- Typical timeline
- 2-4 days of work
Installed, local pricing
$50 – $205 in fees
2-4 days of work
Moore runs -12% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Moore is $3,900. The local adjustment for this trade is x0.876 — driven mainly by Cleveland County labor rates and 20% exposure to local code requirements.
Estimate your Moore job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Moore (local adjustment x0.876).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 3 zone | $1,200 – $2,900 |
| 5 zone | $2,000 – $4,800 |
| 6 zone | $2,400 – $5,700 |
| 8 zone | $3,200 – $7,600 |
| 10 zone | $4,000 – $9,500 |
Based on Moore pricing of $400–$950 per zone.
Where the money goes
- Labor
- $2,300
- 57% of median
- Materials
- $1,600
- 40% of median
- Permit & fees
- $130
- 3% of median
Moore project costs-12% vs U.S. average
Based on Cleveland County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Moore building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-4 days of work
05
Inspection
Backflow preventer inspection, Final inspection where permitted
06
Closeout
Final sign-off, warranty and documentation
Moore labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$45–$59
Outdoor crews in Cleveland County · -17% vs U.S. ($62/hr)
Typical crew
2 × 3 days
On-site time for a typical irrigation job here.
Labor in the price
$2,300
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Moore wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Cleveland County labor factor (x0.831). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Moore differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$450
Cleveland County crews price 17% below the national average, and labor is 58% of this job.
Material and delivery-$100
Materials are nationally traded, so they move less — but delivery into this market runs 6% under baseline.
Permit fees-$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Moore median against the U.S. median for this scope. · City of Moore building department, Hometriva methodology
Moore vs Oklahoma vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated irrigation system installation in Moore
$4,030
Likely range $2,030 – $8,930
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Lot size and number of zones
- Water source: city meter, reclaimed or well
- Backflow preventer requirements
- Rotor versus spray heads and drip lines
- Smart controller and rain sensor
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Moore building departmentModeled estimate |
| electrical | City of Moore building departmentModeled estimate |
| mechanical | City of Moore building departmentModeled estimate |
| plumbing | City of Moore building departmentModeled estimate |
| zoning | City of Moore building departmentModeled estimate |
| fire | City of Moore building departmentModeled estimate |
Permit requirement in Moore
It depends on scope. Like-for-like cosmetic work in Moore is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Moore building departmentModeled estimate
- Permit fee
- Estimated allowance $50–$205Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Backflow preventer inspection
- Final inspection where permitted
Local conditions that change this job
Only the exposures that materially affect irrigation system installation.
Cooling load / heat exposure
Severe82/100
Annual rainfall
High74/100
Nearby market comparison
| Market | Local factor | Median | Per zone |
|---|---|---|---|
| Moore (this page) | x0.876 | $3,900 | $400 – $950 |
| Norman | x0.876 | $3,900 | $400 – $950 |
| Oklahoma City | x0.907 | $4,100 | $400 – $1,000 |
| Edmond | x0.876 | $3,900 | $400 – $950 |
What Moore homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Moore
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Moore irrigation costs
Hometriva does not publish invented city prices. The Moore estimate for irrigation system installation is produced by this chain, and every input is stored separately:
- National baseline$4,500
Typical U.S. cost for irrigation system installation on a single-family home.
- Local labor factorx0.831
Moore-area trade labor rates, weighted at 58% of this job.
- Material factorx0.943
Material and delivery pricing into Cleveland County, weighted at 42%.
- Regulatory factorx0.989
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx0.876
Blended Moore adjustment specific to irrigation system installation.
- Permit component$50 – $205
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, irrigation system installation in Moore carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for irrigation system installation pricing in Moore, OK.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does irrigation system installation take?
2-4 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are lot size and number of zones; water source: city meter, reclaimed or well; backflow preventer requirements.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.