Mold Remediation cost in Dallas, TX
Dallas, TX · updated August 2026
$4,500
Typical local cost
$1,500 – $14,900
Typical range
- per sq ft of affected area
- $12 – $35
- Permit
- It depends
- Typical timeline
- 3-10 days of work
Installed, local pricing
$0 – $315 in fees
3-10 days of work
Dallas runs -1% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Dallas homeowners pay around $4,500. The local adjustment for this trade is x0.994 — driven mainly by Dallas County labor rates and 30% exposure to local code requirements.
Estimate your Dallas job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 125 sq ft of affected area | $1,500 – $4,400 |
| 150 sq ft of affected area | $1,800 – $5,300 |
| 200 sq ft of affected area | $2,400 – $7,000 |
| 250 sq ft of affected area | $3,000 – $8,800 |
| 325 sq ft of affected area | $3,900 – $11,400 |
Based on Dallas pricing of $12–$35 per sq ft of affected area.
Where the money goes
- Labor
- $3,400
- 73% of median
- Materials
- $1,100
- 24% of median
- Permit & fees
- $160
- 3% of median
Dallas project costs-1% vs U.S. average
Based on Dallas County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Dallas building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-10 days of work
05
Inspection
Post-remediation verification testing, Building inspection if structural repairs follow
06
Closeout
Final sign-off, warranty and documentation
Dallas labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$62–$80
Restoration crews in Dallas County · -3% vs U.S. ($72/hr)
Typical crew
2 × 3 days
On-site time for a typical mold job here.
Labor in the price
$3,400
75% of the median — the rest is material, disposal and permit.
Because labor is 75% of this job, Dallas wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national restoration crew rates adjusted by the Dallas County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Dallas differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$100
Dallas County crews price 3% below the national average, and labor is 75% of this job.
Code and inspection load+$75
Mold Remediation carries 30% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Basis: Decomposition of the modeled Dallas median against the U.S. median for this scope. · City of Dallas building department, Hometriva methodology
Dallas vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated mold remediation in Dallas
$4,660
Likely range $1,660 – $15,060
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Affected square footage and number of rooms
- HVAC system contamination
- Containment and negative air equipment
- Demolition and reconstruction of affected assemblies
- Independent clearance testing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Dallas building departmentModeled estimate |
| electrical | City of Dallas building departmentModeled estimate |
| mechanical | City of Dallas building departmentModeled estimate |
| plumbing | City of Dallas building departmentModeled estimate |
| zoning | City of Dallas building departmentModeled estimate |
| fire | City of Dallas building departmentModeled estimate |
Permit requirement in Dallas
It depends on scope. Like-for-like cosmetic work in Dallas is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Dallas building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$315Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Post-remediation verification testing
- Building inspection if structural repairs follow
Local conditions that change this job
Only the exposures that materially affect mold remediation.
Humidity
Moderate58/100
Flood zone exposure
Moderate48/100
Annual rainfall
Moderate48/100
North Texas hail and expansive clay soils dominate the local project mix, from impact-rated roofing to foundation work.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of affected area |
|---|---|---|---|
| Dallas (this page) | x0.994 | $4,500 | $12 – $35 |
| Fort Worth | x0.969 | $4,400 | $11.50 – $34 |
| Austin | x1.087 | $4,900 | $13 – $38 |
| Houston | x0.991 | $4,500 | $12 – $34.50 |
What Dallas homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Dallas
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Dallas mold costs
Hometriva does not publish invented city prices. The Dallas estimate for mold remediation is produced by this chain, and every input is stored separately:
- National baseline$4,500
Typical U.S. cost for mold remediation on a single-family home.
- Local labor factorx0.974
Dallas-area trade labor rates, weighted at 75% of this job.
- Material factorx0.992
Material and delivery pricing into Dallas County, weighted at 25%.
- Regulatory factorx1.054
Local code, product-approval and inspection load, applied at 30% for this project type.
- Applied multiplierx0.994
Blended Dallas adjustment specific to mold remediation.
- Permit component$0 – $315
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, mold remediation in Dallas carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for mold remediation pricing in Dallas, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does Florida license mold remediation?
Yes. Florida requires separate licenses for mold assessors and mold remediators, and with limited exceptions the same company cannot both assess and remediate the same property — which protects you from inflated scope.
Sources
Sources & verification
- City of Dallas building department
- Dallas permit portal
- Texas Department of Licensing and Regulation
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.