Pool Enclosure / Screen Cage cost in Arlington, VA
Arlington, VA · updated August 2026
$19,800
Typical local cost
$9,900 – $46,200
Typical range
- per sq ft of enclosure
- $20 – $44
- Permit
- Yes
- Typical timeline
- 1-2 weeks of work
Installed, local pricing
$185 – $720 in fees
1-2 weeks of work, 4-10 weeks including engineering and permitting
Arlington runs +10% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Arlington is $19,800. The local adjustment for this trade is x1.099 — driven mainly by Arlington County labor rates and 80% exposure to local code requirements.
Estimate your Arlington job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Arlington (local adjustment x1.099).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 400 sq ft of enclosure | $8,000 – $17,600 |
| 500 sq ft of enclosure | $10,000 – $22,000 |
| 600 sq ft of enclosure | $12,000 – $26,400 |
| 800 sq ft of enclosure | $16,000 – $35,200 |
| 1,100 sq ft of enclosure | $22,000 – $48,400 |
Based on Arlington pricing of $20–$44 per sq ft of enclosure.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Aluminum Fence | $19,800 – $31,700 | 30–50 yrs | Very low |
Where the money goes
- Labor
- $11,500
- 57% of median
- Materials
- $8,300
- 41% of median
- Permit & fees
- $455
- 2% of median
Arlington project costs+10% vs U.S. average
Based on Arlington County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Arlington building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 weeks of work, 4-10 weeks including engineering and permitting
05
Inspection
Footing / anchor inspection, Framing inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Arlington labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$75
Outdoor crews in Arlington County · +6% vs U.S. ($62/hr)
Typical crew
3 × 7.5 days
On-site time for a typical pool cage job here.
Labor in the price
$11,500
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Arlington wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Arlington County labor factor (x1.065). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Arlington differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$725
Pool Enclosure / Screen Cage carries 80% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Trade labor rates+$675
Arlington County crews price 6% above the national average, and labor is 58% of this job.
Material and delivery+$325
Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline.
Basis: Decomposition of the modeled Arlington median against the U.S. median for this scope. · City of Arlington building department, Hometriva methodology
Arlington vs Virginia vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool enclosure / screen cage in Arlington
$20,255
Likely range $10,355 – $46,655
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Enclosure footprint and height
- Mansard versus gable roof style
- Screen type including no-see-um and pet screen
- Design wind speed for the parcel
- Existing deck footing capacity
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Arlington building departmentModeled estimate |
| electrical | City of Arlington building departmentModeled estimate |
| mechanical | City of Arlington building departmentModeled estimate |
| plumbing | City of Arlington building departmentModeled estimate |
| zoning | City of Arlington building departmentModeled estimate |
| fire | City of Arlington building departmentModeled estimate |
Permit requirement in Arlington
Yes — a permit is required for pool enclosure / screen cage in Arlington, VA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Arlington building departmentModeled estimate
- Permit fee
- Estimated allowance $185–$720Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Footing / anchor inspection
- Framing inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect pool enclosure / screen cage.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Cooling load / heat exposure
Severe82/100
Arlington sits in Arlington County, Virginia. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of enclosure |
|---|---|---|---|
| Arlington (this page) | x1.099 | $19,800 | $20 – $44 |
| Washington | x1.343 | $24,200 | $24 – $53.50 |
| Alexandria | x1.099 | $19,800 | $20 – $44 |
| Silver Spring | x1.189 | $21,400 | $21.50 – $47.50 |
What Arlington homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Arlington
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Arlington pool cage costs
Hometriva does not publish invented city prices. The Arlington estimate for pool enclosure / screen cage is produced by this chain, and every input is stored separately:
- National baseline$18,000
Typical U.S. cost for pool enclosure / screen cage on a single-family home.
- Local labor factorx1.065
Arlington-area trade labor rates, weighted at 58% of this job.
- Material factorx1.044
Material and delivery pricing into Arlington County, weighted at 42%.
- Regulatory factorx1.051
Local code, product-approval and inspection load, applied at 80% for this project type.
- Applied multiplierx1.099
Blended Arlington adjustment specific to pool enclosure / screen cage.
- Permit component$185 – $720
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool enclosure / screen cage in Arlington carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool enclosure / screen cage pricing in Arlington, VA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for pool enclosure / screen cage in Arlington, VA?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool enclosure / screen cage take?
1-2 weeks of work, 4-10 weeks including engineering and permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are enclosure footprint and height; mansard versus gable roof style; screen type including no-see-um and pet screen.
Sources
Sources & verification
- Virginia Department of Housing and Community Development
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.