Pool Installation cost in Johns Creek, GA
Johns Creek, GA · updated August 2026
$59,300
Typical local cost
$36,300 – $109,900
Typical range
- per in-ground gunite pool
- $36,350 – $109,950
- Permit
- Yes
- Typical timeline
- 8-16 weeks from permit to plaster
Installed, local pricing
$360 – $1,620 in fees
8-16 weeks from permit to plaster
Johns Creek runs -4% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Johns Creek is $59,300. The local adjustment for this trade is x0.956 — driven mainly by Fulton County labor rates and 70% exposure to local code requirements.
Estimate your Johns Creek job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$77,207 – $113,645
Turnkey, including permit allowance
- Pool surface area
- 450 sq ft
- Shell & excavation
- $45,171
- Decking
- $8,030
- Screen enclosure
- $22,084
- Approx. water volumeAt 5.5 ft average depth
- 18,513 gallons
Priced for Johns Creek (local adjustment x0.956).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| Small pool (under 300 sq ft) | $29,000 – $87,900 |
| Standard pool (300–450 sq ft) | $36,300 – $109,900 |
| Large pool (450–600 sq ft) | $47,200 – $142,900 |
| Large pool with spa and deck | $61,700 – $186,800 |
Based on Johns Creek pricing of $36,350–$109,950 per in-ground gunite pool.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Fiberglass Pool | $40,300 – $62,300 | 25–40 yrs | Low |
| Gunite / Concrete Pool | $56,300 – $100,800 | 50–75 yrs | High |
| Vinyl Liner Pool | $32,600 – $53,400 | 20–30 yrs | Moderate |
Where the money goes
- Labor
- $34,400
- 57% of median
- Materials
- $24,900
- 41% of median
- Permit & fees
- $990
- 2% of median
Johns Creek project costs-4% vs U.S. average
Based on Fulton County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Johns Creek building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
8-16 weeks from permit to plaster
05
Inspection
Steel / pre-gunite, Plumbing pressure test, Electrical bonding, Deck and barrier, Final pool and safety inspection
06
Closeout
Final sign-off, warranty and documentation
Johns Creek labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$50–$65
Outdoor crews in Fulton County · -8% vs U.S. ($62/hr)
Typical crew
4 × 19 days
On-site time for a typical pool job here.
Labor in the price
$34,400
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Johns Creek wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Fulton County labor factor (x0.922). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Johns Creek differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$2,800
Fulton County crews price 8% below the national average, and labor is 58% of this job.
Code and inspection load+$575
Pool Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Material and delivery-$475
Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.
Permit fees-$100
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Johns Creek median against the U.S. median for this scope. · City of Johns Creek building department, Hometriva methodology
Johns Creek vs Georgia vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool installation in Johns Creek
$60,290
Likely range $37,290 – $110,890
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Pool size, depth and shape
- Gunite versus fiberglass versus vinyl liner
- Screen enclosure or cage
- Deck material and square footage
- Heater, saltwater system, spa and water features
- Required safety barrier and alarms
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Johns Creek building departmentModeled estimate |
| electrical | City of Johns Creek building departmentModeled estimate |
| mechanical | City of Johns Creek building departmentModeled estimate |
| plumbing | City of Johns Creek building departmentModeled estimate |
| zoning | City of Johns Creek building departmentModeled estimate |
| fire | City of Johns Creek building departmentModeled estimate |
Permit requirement in Johns Creek
Yes — a permit is required for pool installation in Johns Creek, GA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Johns Creek building departmentModeled estimate
- Permit fee
- Estimated allowance $360–$1,620Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Steel / pre-gunite
- Plumbing pressure test
- Electrical bonding
- Deck and barrier
- Final pool and safety inspection
Local conditions that change this job
Only the exposures that materially affect pool installation.
Cooling load / heat exposure
Severe82/100
Freeze-thaw cycles
Minimal4/100
Solar irradiance
Severe82/100
Nearby market comparison
| Market | Local factor | Median | Per in-ground gunite pool |
|---|---|---|---|
| Johns Creek (this page) | x0.956 | $59,300 | $36,350 – $109,950 |
| Roswell | x0.956 | $59,300 | $36,350 – $109,950 |
| Sandy Springs | x0.956 | $59,300 | $36,350 – $109,950 |
| Marietta | x0.956 | $59,300 | $36,350 – $109,950 |
What Johns Creek homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Johns Creek
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Johns Creek pool costs
Hometriva does not publish invented city prices. The Johns Creek estimate for pool installation is produced by this chain, and every input is stored separately:
- National baseline$62,000
Typical U.S. cost for pool installation on a single-family home.
- Local labor factorx0.922
Johns Creek-area trade labor rates, weighted at 58% of this job.
- Material factorx0.982
Material and delivery pricing into Fulton County, weighted at 42%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx0.956
Blended Johns Creek adjustment specific to pool installation.
- Permit component$360 – $1,620
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool installation in Johns Creek carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool installation pricing in Johns Creek, GA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for pool installation in Johns Creek, GA?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool installation take?
8-16 weeks from permit to plaster. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are pool size, depth and shape; gunite versus fiberglass versus vinyl liner; screen enclosure or cage.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.