Pool Installation cost in Des Moines, IA
Des Moines, IA · updated August 2026
$60,800
Typical local cost
$37,200 – $112,700
Typical range
- per in-ground gunite pool
- $37,250 – $112,700
- Permit
- Yes
- Typical timeline
- 8-16 weeks from permit to plaster
Installed, local pricing
$390 – $1,765 in fees
8-16 weeks from permit to plaster
Des Moines runs -2% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Des Moines homeowners pay around $60,800. The local adjustment for this trade is x0.980 — driven mainly by Polk County labor rates and 70% exposure to local code requirements.
Estimate your Des Moines job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$72,684 – $106,988
Turnkey, including permit allowance
- Pool surface area
- 450 sq ft
- Shell & excavation
- $42,525
- Decking
- $7,560
- Screen enclosure
- $20,790
- Approx. water volumeAt 5.5 ft average depth
- 18,513 gallons
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 in-ground gunite pool | $37,300 – $112,700 |
| 1 in-ground gunite pool | $37,300 – $112,700 |
| 1 in-ground gunite pool | $37,300 – $112,700 |
| 1 in-ground gunite pool | $37,300 – $112,700 |
| 1 in-ground gunite pool | $37,300 – $112,700 |
Based on Des Moines pricing of $37,250–$112,700 per in-ground gunite pool.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Fiberglass Pool | $41,300 – $63,800 | 25–40 yrs | Low |
| Gunite / Concrete Pool | $57,800 – $103,400 | 50–75 yrs | High |
| Vinyl Liner Pool | $33,400 – $54,700 | 20–30 yrs | Moderate |
Where the money goes
- Labor
- $35,300
- 57% of median
- Materials
- $25,500
- 41% of median
- Permit & fees
- $1,080
- 2% of median
Des Moines project costs-2% vs U.S. average
Based on Polk County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Des Moines building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
8-16 weeks from permit to plaster
05
Inspection
Steel / pre-gunite, Plumbing pressure test, Electrical bonding, Deck and barrier, Final pool and safety inspection
06
Closeout
Final sign-off, warranty and documentation
Des Moines labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$52–$67
Outdoor crews in Polk County · -5% vs U.S. ($62/hr)
Typical crew
4 × 19 days
On-site time for a typical pool job here.
Labor in the price
$35,300
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Des Moines wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Polk County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Des Moines differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$1,875
Polk County crews price 5% below the national average, and labor is 58% of this job.
Code and inspection load+$1,250
Pool Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.
Material and delivery-$575
Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.
Basis: Decomposition of the modeled Des Moines median against the U.S. median for this scope. · City of Des Moines building department, Hometriva methodology
Des Moines vs Iowa vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool installation in Des Moines
$61,880
Likely range $38,280 – $113,780
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Pool size, depth and shape
- Gunite versus fiberglass versus vinyl liner
- Screen enclosure or cage
- Deck material and square footage
- Heater, saltwater system, spa and water features
- Required safety barrier and alarms
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Des Moines building departmentModeled estimate |
| electrical | City of Des Moines building departmentModeled estimate |
| mechanical | City of Des Moines building departmentModeled estimate |
| plumbing | City of Des Moines building departmentModeled estimate |
| zoning | City of Des Moines building departmentModeled estimate |
| fire | City of Des Moines building departmentModeled estimate |
Permit requirement in Des Moines
Yes — a permit is required for pool installation in Des Moines, IA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Des Moines building departmentModeled estimate
- Permit fee
- Estimated allowance $390–$1,765Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Steel / pre-gunite
- Plumbing pressure test
- Electrical bonding
- Deck and barrier
- Final pool and safety inspection
Local conditions that change this job
Only the exposures that materially affect pool installation.
Cooling load / heat exposure
High62/100
Freeze-thaw cycles
Severe82/100
Solar irradiance
Moderate58/100
Deep frost line and derecho wind history change footing depth and roofing decisions relative to milder Midwest markets.
Nearby market comparison
| Market | Local factor | Median | Per in-ground gunite pool |
|---|---|---|---|
| Des Moines (this page) | x0.980 | $60,800 | $37,250 – $112,700 |
| Omaha | x0.970 | $60,100 | $36,850 – $111,550 |
| Minneapolis | x1.194 | $74,000 | $45,350 – $137,300 |
| Kansas City | x1.004 | $62,200 | $38,150 – $115,450 |
What Des Moines homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Des Moines
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Des Moines pool costs
Hometriva does not publish invented city prices. The Des Moines estimate for pool installation is produced by this chain, and every input is stored separately:
- National baseline$62,000
Typical U.S. cost for pool installation on a single-family home.
- Local labor factorx0.948
Des Moines-area trade labor rates, weighted at 58% of this job.
- Material factorx0.978
Material and delivery pricing into Polk County, weighted at 42%.
- Regulatory factorx1.029
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx0.980
Blended Des Moines adjustment specific to pool installation.
- Permit component$390 – $1,765
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool installation in Des Moines carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool installation pricing in Des Moines, IA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to build a pool in Florida?
Yes. Every Florida jurisdiction requires a building permit with engineered plans for an in-ground pool, plus electrical and plumbing permits, and the pool cannot pass final inspection without a compliant safety barrier.
What safety barrier does Florida require?
The Residential Swimming Pool Safety Act requires at least one approved feature: a 4-foot barrier fence meeting code, an approved safety pool cover, self-closing and self-latching exit alarms on doors and windows with direct access, or an approved door alarm system.
How long does pool construction take?
Typical Florida in-ground pool construction runs 8-16 weeks from permit issuance, with inspection scheduling and weather as the two biggest sources of delay.
Sources
Sources & verification
- City of Des Moines building department
- Des Moines permit portal
- Iowa Department of Public Safety
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.