Pool Installation cost in Allentown, PA
Allentown, PA · updated August 2026
$67,400
Typical local cost
$41,300 – $125,000
Typical range
- per in-ground gunite pool
- $41,300 – $125,000
- Permit
- Yes
- Typical timeline
- 8-16 weeks from permit to plaster
Installed, local pricing
$400 – $1,800 in fees
8-16 weeks from permit to plaster
Allentown runs +9% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Allentown is $67,400. The local adjustment for this trade is x1.087 — driven mainly by Lehigh County labor rates and 70% exposure to local code requirements.
Estimate your Allentown job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$87,786 – $129,217
Turnkey, including permit allowance
- Pool surface area
- 450 sq ft
- Shell & excavation
- $51,361
- Decking
- $9,131
- Screen enclosure
- $25,110
- Approx. water volumeAt 5.5 ft average depth
- 18,513 gallons
Priced for Allentown (local adjustment x1.087).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| Small pool (under 300 sq ft) | $33,000 – $100,000 |
| Standard pool (300–450 sq ft) | $41,300 – $125,000 |
| Large pool (450–600 sq ft) | $53,700 – $162,500 |
| Large pool with spa and deck | $70,200 – $212,500 |
Based on Allentown pricing of $41,300–$125,000 per in-ground gunite pool.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Fiberglass Pool | $45,800 – $70,800 | 25–40 yrs | Low |
| Gunite / Concrete Pool | $64,000 – $114,600 | 50–75 yrs | High |
| Vinyl Liner Pool | $37,100 – $60,700 | 20–30 yrs | Moderate |
Where the money goes
- Labor
- $39,100
- 57% of median
- Materials
- $28,300
- 41% of median
- Permit & fees
- $1,100
- 2% of median
Allentown project costs+9% vs U.S. average
Based on Lehigh County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Allentown building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
8-16 weeks from permit to plaster
05
Inspection
Steel / pre-gunite, Plumbing pressure test, Electrical bonding, Deck and barrier, Final pool and safety inspection
06
Closeout
Final sign-off, warranty and documentation
Allentown labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$75
Outdoor crews in Lehigh County · +6% vs U.S. ($62/hr)
Typical crew
4 × 18.5 days
On-site time for a typical pool job here.
Labor in the price
$39,100
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, Allentown wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Lehigh County labor factor (x1.065). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Allentown differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$2,325
Lehigh County crews price 6% above the national average, and labor is 58% of this job.
Code and inspection load+$1,825
Pool Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.
Material and delivery+$1,150
Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline.
Basis: Decomposition of the modeled Allentown median against the U.S. median for this scope. · City of Allentown building department, Hometriva methodology
Allentown vs Pennsylvania vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated pool installation in Allentown
$68,500
Likely range $42,400 – $126,100
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Pool size, depth and shape
- Gunite versus fiberglass versus vinyl liner
- Screen enclosure or cage
- Deck material and square footage
- Heater, saltwater system, spa and water features
- Required safety barrier and alarms
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Allentown building departmentModeled estimate |
| electrical | City of Allentown building departmentModeled estimate |
| mechanical | City of Allentown building departmentModeled estimate |
| plumbing | City of Allentown building departmentModeled estimate |
| zoning | City of Allentown building departmentModeled estimate |
| fire | City of Allentown building departmentModeled estimate |
Permit requirement in Allentown
Yes — a permit is required for pool installation in Allentown, PA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Allentown building departmentModeled estimate
- Permit fee
- Estimated allowance $400–$1,800Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Steel / pre-gunite
- Plumbing pressure test
- Electrical bonding
- Deck and barrier
- Final pool and safety inspection
Local conditions that change this job
Only the exposures that materially affect pool installation.
Cooling load / heat exposure
Severe82/100
Freeze-thaw cycles
Minimal4/100
Solar irradiance
Severe82/100
Allentown sits in Lehigh County, Pennsylvania. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per in-ground gunite pool |
|---|---|---|---|
| Allentown (this page) | x1.087 | $67,400 | $41,300 – $125,000 |
| Bethlehem | x1.087 | $67,400 | $41,300 – $125,000 |
| Reading | x1.087 | $67,400 | $41,300 – $125,000 |
| Philadelphia | x1.240 | $76,900 | $47,100 – $142,600 |
+ Had pool installation done in Allentown? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Allentown pool costs
Hometriva does not publish invented city prices. The Allentown estimate for pool installation is produced by this chain, and every input is stored separately:
- National baseline$62,000
Typical U.S. cost for pool installation on a single-family home.
- Local labor factorx1.065
Allentown-area trade labor rates, weighted at 58% of this job.
- Material factorx1.044
Material and delivery pricing into Lehigh County, weighted at 42%.
- Regulatory factorx1.042
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx1.087
Blended Allentown adjustment specific to pool installation.
- Permit component$400 – $1,800
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, pool installation in Allentown carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for pool installation pricing in Allentown, PA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for pool installation in Allentown, PA?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does pool installation take?
8-16 weeks from permit to plaster. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are pool size, depth and shape; gunite versus fiberglass versus vinyl liner; screen enclosure or cage.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.