Whole-House Repipe cost in Albuquerque, NM
Albuquerque, NM · updated August 2026
$7,600
Typical local cost
$4,200 – $14,900
Typical range
- per house repiped
- $4,200 – $14,900
- Permit
- Yes
- Typical timeline
- 3-6 days of work
Installed, local pricing
$115 – $430 in fees
3-6 days of work, 2-5 weeks including inspections and drywall repair
Albuquerque runs -7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Albuquerque homeowners pay around $7,600. The local adjustment for this trade is x0.932 — driven mainly by Bernalillo County labor rates and 55% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 house repiped | $4,200 – $14,900 |
| 1 house repiped | $4,200 – $14,900 |
| 1 house repiped | $4,200 – $14,900 |
| 1 house repiped | $4,200 – $14,900 |
| 1 house repiped | $4,200 – $14,900 |
Based on Albuquerque pricing of $4,200–$14,900 per house repiped.
Where the money goes
- Labor
- $5,300
- 67% of median
- Materials
- $2,300
- 29% of median
- Permit & fees
- $275
- 3% of median
Albuquerque project costs-7% vs U.S. average
Based on Bernalillo County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Albuquerque building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-6 days of work, 2-5 weeks including inspections and drywall repair
05
Inspection
Rough plumbing / pressure test, Drywall patch, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Albuquerque labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$84–$109
Plumbing crews in Bernalillo County · -9% vs U.S. ($105/hr)
Typical crew
3 × 2.5 days
On-site time for a typical repipe job here.
Labor in the price
$5,300
70% of the median — the rest is material, disposal and permit.
Because labor is 70% of this job, Albuquerque wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Bernalillo County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Albuquerque differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$525
Bernalillo County crews price 9% below the national average, and labor is 70% of this job.
Material and delivery-$100
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Code and inspection load+$50
Whole-House Repipe carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Basis: Decomposition of the modeled Albuquerque median against the U.S. median for this scope. · City of Albuquerque building department, Hometriva methodology
Albuquerque vs New Mexico vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated whole-house repipe in Albuquerque
$7,875
Likely range $4,475 – $15,175
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Number of bathrooms and fixtures
- Slab versus attic routing
- PEX versus CPVC versus copper
- Drywall cutting and patching
- House square footage and stories
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Albuquerque building departmentModeled estimate |
| electrical | City of Albuquerque building departmentModeled estimate |
| mechanical | City of Albuquerque building departmentModeled estimate |
| plumbing | City of Albuquerque building departmentModeled estimate |
| zoning | City of Albuquerque building departmentModeled estimate |
| fire | City of Albuquerque building departmentModeled estimate |
Permit requirement in Albuquerque
Yes — a permit is required for whole-house repipe in Albuquerque, NM. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Albuquerque building departmentModeled estimate
- Permit fee
- Estimated allowance $115–$430Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Rough plumbing / pressure test
- Drywall patch
- Final inspection
Local conditions that change this job
Only the exposures that materially affect whole-house repipe.
Humidity
Minimal18/100
High-desert sun and low humidity favor evaporative cooling and flat-roof coatings that behave very differently from humid-climate systems.
Owner-occupied homes
60%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
224,110
Approximate household count in Albuquerque, used to size the contractor pool for this trade.
Permit activity index
x0.96
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
What Albuquerque homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Albuquerque
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Albuquerque repipe costs
Hometriva does not publish invented city prices. The Albuquerque estimate for whole-house repipe is produced by this chain, and every input is stored separately:
- National baseline$8,200
Typical U.S. cost for whole-house repipe on a single-family home.
- Local labor factorx0.909
Albuquerque-area trade labor rates, weighted at 70% of this job.
- Material factorx0.962
Material and delivery pricing into Bernalillo County, weighted at 30%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx0.932
Blended Albuquerque adjustment specific to whole-house repipe.
- Permit component$115 – $430
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, whole-house repipe in Albuquerque carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for whole-house repipe pricing in Albuquerque, NM.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to repipe a house?
Yes. A whole-house repipe is major plumbing work and requires a permit, a pressure test inspection and a final inspection in every Florida jurisdiction.
Sources
Sources & verification
- City of Albuquerque building department
- Albuquerque permit portal
- New Mexico Construction Industries Division
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.