Seawall Repair cost in Albuquerque, NM
Albuquerque, NM · updated August 2026
$26,300
Typical local cost
$7,500 – $89,400
Typical range
- per linear foot
- $350 – $1,150
- Permit
- Yes
- Typical timeline
- 2-6 weeks of work
Installed, local pricing
$385 – $2,400 in fees
2-6 weeks of work, 3-9 months including environmental permitting
Albuquerque runs -6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Albuquerque homeowners pay around $26,300. The local adjustment for this trade is x0.941 — driven mainly by Bernalillo County labor rates and 90% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 20 linear foot | $7,000 – $23,000 |
| 30 linear foot | $10,500 – $34,500 |
| 35 linear foot | $12,300 – $40,300 |
| 45 linear foot | $15,800 – $51,800 |
| 60 linear foot | $21,000 – $69,000 |
Based on Albuquerque pricing of $350–$1,150 per linear foot.
Where the money goes
- Labor
- $15,800
- 57% of median
- Materials
- $10,500
- 38% of median
- Permit & fees
- $1,395
- 5% of median
Albuquerque project costs-6% vs U.S. average
Based on Bernalillo County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Albuquerque building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-6 weeks of work, 3-9 months including environmental permitting
05
Inspection
Pre-construction site inspection, Cap and tieback inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Albuquerque labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$70–$91
Waterfront crews in Bernalillo County · -9% vs U.S. ($88/hr)
Typical crew
4 × 6 days
On-site time for a typical seawall job here.
Labor in the price
$15,800
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Albuquerque wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national waterfront crew rates adjusted by the Bernalillo County labor factor (x0.909). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Albuquerque differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$1,525
Bernalillo County crews price 9% below the national average, and labor is 60% of this job.
Material and delivery-$425
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Code and inspection load+$325
Seawall Repair carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.01.
Permit fees-$50
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Albuquerque median against the U.S. median for this scope. · City of Albuquerque building department, Hometriva methodology
Albuquerque vs New Mexico vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated seawall repair in Albuquerque
$27,695
Likely range $8,895 – $90,795
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and wall height
- Repair with tiebacks versus full replacement
- Vinyl, concrete or steel panel system
- Water access for barge-based work
- Environmental and Army Corps permitting timelines
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Albuquerque building departmentModeled estimate |
| electrical | City of Albuquerque building departmentModeled estimate |
| mechanical | City of Albuquerque building departmentModeled estimate |
| plumbing | City of Albuquerque building departmentModeled estimate |
| zoning | City of Albuquerque building departmentModeled estimate |
| fire | City of Albuquerque building departmentModeled estimate |
Permit requirement in Albuquerque
Yes — a permit is required for seawall repair in Albuquerque, NM. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Albuquerque building departmentModeled estimate
- Permit fee
- Estimated allowance $385–$2,400Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Pre-construction site inspection
- Cap and tieback inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect seawall repair.
Coastal / salt-air exposure
Minimal0/100
Named-storm exposure
Low22/100
Flood zone exposure
Low30/100
High-desert sun and low humidity favor evaporative cooling and flat-roof coatings that behave very differently from humid-climate systems.
Nearby market comparison
What Albuquerque homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Albuquerque
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Albuquerque seawall costs
Hometriva does not publish invented city prices. The Albuquerque estimate for seawall repair is produced by this chain, and every input is stored separately:
- National baseline$28,000
Typical U.S. cost for seawall repair on a single-family home.
- Local labor factorx0.909
Albuquerque-area trade labor rates, weighted at 60% of this job.
- Material factorx0.962
Material and delivery pricing into Bernalillo County, weighted at 40%.
- Regulatory factorx1.013
Local code, product-approval and inspection load, applied at 90% for this project type.
- Applied multiplierx0.941
Blended Albuquerque adjustment specific to seawall repair.
- Permit component$385 – $2,400
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, seawall repair in Albuquerque carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for seawall repair pricing in Albuquerque, NM.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does seawall permitting take in Florida?
Plan for three to nine months. Beyond the local building permit you typically need an environmental resource permit from the water management district and, depending on the waterway, federal authorization.
Sources
Sources & verification
- City of Albuquerque building department
- Albuquerque permit portal
- New Mexico Construction Industries Division
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.