Seawall Repair cost in St. Augustine, FL

St. Augustine, FL · updated August 2026

$29,300

Typical local cost

$8,400 – $99,600

Typical range

per linear foot
$350 – $1,250

Installed, local pricing

Permit
Yes

$400 – $2,500 in fees

Typical timeline
2-6 weeks of work

2-6 weeks of work, 3-9 months including environmental permitting

St. Augustine runs +5% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for St. Augustine is $29,300. The local adjustment for this trade is x1.048 — driven mainly by St. Johns County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
20 linear foot$7,000$25,000
30 linear foot$10,500$37,500
35 linear foot$12,300$43,800
45 linear foot$15,800$56,300
60 linear foot$21,000$75,000

Based on St. Augustine pricing of $350–$1,250 per linear foot.

Where the money goes

Labor
$17,600
57% of median
Materials
$11,700
38% of median
Permit & fees
$1,450
5% of median

St. Augustine project costs+5% vs U.S. average

Based on St. Johns County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of St. Augustine building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    2-6 weeks of work, 3-9 months including environmental permitting

  5. 05

    Inspection

    Pre-construction site inspection, Cap and tieback inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

St. Augustine labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$77–$100

Waterfront crews in St. Johns County · 0% vs U.S. ($88/hr)

Typical crew

4 × 6.5 days

On-site time for a typical seawall job here.

Labor in the price

$17,600

60% of the median — the rest is material, disposal and permit.

Because labor is 60% of this job, St. Augustine wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national waterfront crew rates adjusted by the St. Johns County labor factor (x1.000). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why St. Augustine differs from the national average

The local delta, broken into dollars by driver.

Code and inspection load$1,000Material and delivery$325
Dollars of the St. Augustine difference owned by each driver, versus the U.S. median for seawall repair.
  • Code and inspection load+$1,000

    Seawall Repair carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.

  • Material and delivery+$325

    Materials are nationally traded, so they move less — but delivery into this market runs 3% over baseline because of coastal logistics.

Basis: Decomposition of the modeled St. Augustine median against the U.S. median for this scope. · City of St. Augustine building department, Hometriva methodology

St. Augustine vs Florida vs the U.S.

St. Augustine$8,400$99,600Florida average$9,000$107,100U.S. average$8,000$95,000
Modeled ranges for seawall repair. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated seawall repair in St. Augustine

$30,750

Likely range $9,850$101,050

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Linear footage and wall height
  • Repair with tiebacks versus full replacement
  • Vinyl, concrete or steel panel system
  • Water access for barge-based work
  • Environmental and Army Corps permitting timelines

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of St. Augustine building departmentModeled estimate
electricalCity of St. Augustine building departmentModeled estimate
mechanicalCity of St. Augustine building departmentModeled estimate
plumbingCity of St. Augustine building departmentModeled estimate
zoningCity of St. Augustine building departmentModeled estimate
fireCity of St. Augustine building departmentModeled estimate

Permit requirement in St. Augustine

Yes — a permit is required for seawall repair in St. Augustine, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of St. Augustine building departmentModeled estimate
Permit fee
Estimated allowance $400$2,500Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Pre-construction site inspection
  2. Cap and tieback inspection
  3. Final inspection
Full St. Augustine permit guide for seawall repair

Local conditions that change this job

Only the exposures that materially affect seawall repair.

Coastal / salt-air exposure

Severe82/100

Named-storm exposure

High66/100

Flood zone exposure

High74/100

Historic district properties face additional design review that can add weeks to exterior projects.

Nearby market comparison

MarketLocal factorMedianPer linear foot
St. Augustine (this page)x1.048$29,300$350$1,250
Jacksonvillex0.982$27,500$350$1,200
Daytona Beachx1.017$28,500$350$1,200
Gainesvillex0.942$26,400$350$1,150

What St. Augustine homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in St. Augustine

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates St. Augustine seawall costs

Hometriva does not publish invented city prices. The St. Augustine estimate for seawall repair is produced by this chain, and every input is stored separately:

  1. National baseline$28,000

    Typical U.S. cost for seawall repair on a single-family home.

  2. Local labor factorx1.000

    St. Augustine-area trade labor rates, weighted at 60% of this job.

  3. Material factorx1.029

    Material and delivery pricing into St. Johns County, weighted at 40%.

  4. Regulatory factorx1.040

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.048

    Blended St. Augustine adjustment specific to seawall repair.

  6. Permit component$400 – $2,500

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, seawall repair in St. Augustine carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for seawall repair pricing in St. Augustine, FL.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How long does seawall permitting take in Florida?

Plan for three to nine months. Beyond the local building permit you typically need an environmental resource permit from the water management district and, depending on the waterway, federal authorization.

Do I need a permit for seawall repair in St. Augustine, FL?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does seawall repair take?

2-6 weeks of work, 3-9 months including environmental permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are linear footage and wall height; repair with tiebacks versus full replacement; vinyl, concrete or steel panel system.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages