Seawall Repair cost in Rock Springs, WY
Rock Springs, WY · updated August 2026
$26,000
Typical local cost
$7,400 – $88,400
Typical range
- per linear foot
- $350 – $1,100
- Permit
- Yes
- Typical timeline
- 2-6 weeks of work
Installed, local pricing
$300 – $1,875 in fees
2-6 weeks of work, 3-9 months including environmental permitting
Rock Springs runs -7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Rock Springs is $26,000. The local adjustment for this trade is x0.930 — driven mainly by Sweetwater County labor rates and 90% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 20 linear foot | $7,000 – $22,000 |
| 30 linear foot | $10,500 – $33,000 |
| 35 linear foot | $12,300 – $38,500 |
| 45 linear foot | $15,800 – $49,500 |
| 60 linear foot | $21,000 – $66,000 |
Based on Rock Springs pricing of $350–$1,100 per linear foot.
Where the money goes
- Labor
- $15,600
- 58% of median
- Materials
- $10,400
- 38% of median
- Permit & fees
- $1,090
- 4% of median
Rock Springs project costs-7% vs U.S. average
Based on Sweetwater County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Rock Springs building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-6 weeks of work, 3-9 months including environmental permitting
05
Inspection
Pre-construction site inspection, Cap and tieback inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Rock Springs labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$72–$94
Waterfront crews in Sweetwater County · -6% vs U.S. ($88/hr)
Typical crew
4 × 6 days
On-site time for a typical seawall job here.
Labor in the price
$15,600
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Rock Springs wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national waterfront crew rates adjusted by the Sweetwater County labor factor (x0.935). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Rock Springs differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$1,100
Sweetwater County crews price 6% below the national average, and labor is 60% of this job.
Code and inspection load-$775
Seawall Repair carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x0.97.
Permit fees-$350
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Material and delivery-$125
Materials are nationally traded, so they move less — but delivery into this market runs 1% under baseline.
Basis: Decomposition of the modeled Rock Springs median against the U.S. median for this scope. · City of Rock Springs building department, Hometriva methodology
Rock Springs vs Wyoming vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated seawall repair in Rock Springs
$27,090
Likely range $8,490 – $89,490
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage and wall height
- Repair with tiebacks versus full replacement
- Vinyl, concrete or steel panel system
- Water access for barge-based work
- Environmental and Army Corps permitting timelines
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Rock Springs building departmentModeled estimate |
| electrical | City of Rock Springs building departmentModeled estimate |
| mechanical | City of Rock Springs building departmentModeled estimate |
| plumbing | City of Rock Springs building departmentModeled estimate |
| zoning | City of Rock Springs building departmentModeled estimate |
| fire | City of Rock Springs building departmentModeled estimate |
Permit requirement in Rock Springs
Yes — a permit is required for seawall repair in Rock Springs, WY. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Rock Springs building departmentModeled estimate
- Permit fee
- Estimated allowance $300–$1,875Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Pre-construction site inspection
- Cap and tieback inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect seawall repair.
Coastal / salt-air exposure
Moderate45/100
Named-storm exposure
High70/100
Flood zone exposure
Moderate50/100
Nearby market comparison
| Market | Local factor | Median | Per linear foot |
|---|---|---|---|
| Rock Springs (this page) | x0.930 | $26,000 | $350 – $1,100 |
| Ogden | x0.988 | $27,700 | $350 – $1,200 |
What Rock Springs homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Rock Springs
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Rock Springs seawall costs
Hometriva does not publish invented city prices. The Rock Springs estimate for seawall repair is produced by this chain, and every input is stored separately:
- National baseline$28,000
Typical U.S. cost for seawall repair on a single-family home.
- Local labor factorx0.935
Rock Springs-area trade labor rates, weighted at 60% of this job.
- Material factorx0.988
Material and delivery pricing into Sweetwater County, weighted at 40%.
- Regulatory factorx0.969
Local code, product-approval and inspection load, applied at 90% for this project type.
- Applied multiplierx0.930
Blended Rock Springs adjustment specific to seawall repair.
- Permit component$300 – $1,875
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, seawall repair in Rock Springs carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for seawall repair pricing in Rock Springs, WY.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for seawall repair in Rock Springs, WY?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does seawall repair take?
2-6 weeks of work, 3-9 months including environmental permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear footage and wall height; repair with tiebacks versus full replacement; vinyl, concrete or steel panel system.
Sources
Sources & verification
- Wyoming Department of Fire Prevention and Electrical Safety
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.