Siding Installation cost in Philadelphia, PA
Philadelphia, PA · updated August 2026
$20,200
Typical local cost
$9,800 – $46,600
Typical range
- per sq ft of wall area
- $7.50 – $22
- Permit
- Usually yes
- Typical timeline
- 5-12 days of work
Installed, local pricing
$145 – $600 in fees
5-12 days of work, 3-7 weeks including permitting
Philadelphia runs +23% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Philadelphia homeowners pay around $20,200. The local adjustment for this trade is x1.226 — driven mainly by Philadelphia County labor rates and 60% exposure to local code requirements.
Estimate your Philadelphia job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 800 sq ft of wall area | $6,000 – $17,600 |
| 1,100 sq ft of wall area | $8,300 – $24,200 |
| 1,400 sq ft of wall area | $10,500 – $30,800 |
| 1,800 sq ft of wall area | $13,500 – $39,600 |
| 2,300 sq ft of wall area | $17,300 – $50,600 |
Based on Philadelphia pricing of $8–$22 per sq ft of wall area.
Where the money goes
- Labor
- $11,100
- 54% of median
- Materials
- $9,100
- 44% of median
- Permit & fees
- $375
- 2% of median
Philadelphia project costs+23% vs U.S. average
Based on Philadelphia County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Philadelphia building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
5-12 days of work, 3-7 weeks including permitting
05
Inspection
Weather barrier / sheathing, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Philadelphia labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$72–$94
Exterior crews in Philadelphia County · +21% vs U.S. ($68/hr)
Typical crew
3 × 5.5 days
On-site time for a typical siding job here.
Labor in the price
$11,100
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Philadelphia wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Philadelphia County labor factor (x1.208). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Philadelphia differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$1,900
Philadelphia County crews price 21% above the national average, and labor is 55% of this job.
Code and inspection load+$925
Siding Installation carries 60% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.
Material and delivery+$775
Materials are nationally traded, so they move less — but delivery into this market runs 10% over baseline.
Permit fees+$75
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Philadelphia median against the U.S. median for this scope. · City of Philadelphia building department, Hometriva methodology
Philadelphia vs Pennsylvania vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated siding installation in Philadelphia
$20,575
Likely range $10,175 – $46,975
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Wall square footage and number of stories
- Material: vinyl, fiber cement or engineered wood
- Removal and disposal of the old cladding
- Rot repair discovered after tear-off
- Trim, soffit and corner detailing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Philadelphia building departmentModeled estimate |
| electrical | City of Philadelphia building departmentModeled estimate |
| mechanical | City of Philadelphia building departmentModeled estimate |
| plumbing | City of Philadelphia building departmentModeled estimate |
| zoning | City of Philadelphia building departmentModeled estimate |
| fire | City of Philadelphia building departmentModeled estimate |
Permit requirement in Philadelphia
In most cases yes — Philadelphia County and the City of Philadelphia generally require a permit for siding installation. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of Philadelphia building departmentModeled estimate
- Permit fee
- Estimated allowance $145–$600Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Weather barrier / sheathing
- Final inspection
Local conditions that change this job
Only the exposures that materially affect siding installation.
Design wind speed exposure
Moderate58/100
Named-storm exposure
Moderate52/100
Coastal / salt-air exposure
Moderate40/100
Humidity
High66/100
Rowhouse construction, party walls and Licenses & Inspections review make even modest structural work more procedural than in detached-housing markets.
Owner-occupied homes
53%
Owner-occupied share of the housing stock, which drives how much of this work is homeowner-funded versus landlord-funded.
Households in market
620,217
Approximate household count in Philadelphia, used to size the contractor pool for this trade.
Permit activity index
x1.20
Relative permit volume and fee load versus the national baseline.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of wall area |
|---|---|---|---|
| Philadelphia (this page) | x1.226 | $20,200 | $7.50 – $22 |
| Pittsburgh | x1.088 | $18,000 | $6.50 – $19.50 |
| Baltimore | x1.129 | $18,600 | $7 – $20.50 |
| Newark | x1.359 | $22,400 | $8 – $24.50 |
What Philadelphia homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Philadelphia
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Philadelphia siding costs
Hometriva does not publish invented city prices. The Philadelphia estimate for siding installation is produced by this chain, and every input is stored separately:
- National baseline$16,500
Typical U.S. cost for siding installation on a single-family home.
- Local labor factorx1.208
Philadelphia-area trade labor rates, weighted at 55% of this job.
- Material factorx1.103
Material and delivery pricing into Philadelphia County, weighted at 45%.
- Regulatory factorx1.093
Local code, product-approval and inspection load, applied at 60% for this project type.
- Applied multiplierx1.226
Blended Philadelphia adjustment specific to siding installation.
- Permit component$145 – $600
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, siding installation in Philadelphia carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for siding installation pricing in Philadelphia, PA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is fiber cement siding good for Florida?
Fiber cement handles humidity and wind-driven rain better than most wood products and resists termites, but it needs correctly detailed flashing and periodic repainting to stay watertight.
Sources
Sources & verification
- City of Philadelphia building department
- Philadelphia permit portal
- Pennsylvania Department of Labor and Industry
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.