Sod Installation cost in Colorado Springs, CO
Colorado Springs, CO · updated August 2026
$2,700
Typical local cost
$900 – $7,100
Typical range
- per sq ft installed
- $0.50 – $1.50
- Permit
- Usually no
- Typical timeline
- 1-2 days of work
Installed, local pricing
$0 – $0 in fees
1-2 days of work
Colorado Springs runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Colorado Springs homeowners pay around $2,700. The local adjustment for this trade is x1.020 — driven mainly by El Paso County labor rates and 5% exposure to local code requirements.
Estimate your Colorado Springs job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1,500 sq ft installed | $800 – $2,300 |
| 2,000 sq ft installed | $1,000 – $3,000 |
| 2,500 sq ft installed | $1,300 – $3,800 |
| 3,000 sq ft installed | $1,500 – $4,500 |
| 4,000 sq ft installed | $2,000 – $6,000 |
Based on Colorado Springs pricing of $1–$2 per sq ft installed.
Where the money goes
- Labor
- $1,200
- 44% of median
- Materials
- $1,500
- 56% of median
- Permit & fees
- $0
- 0% of median
Colorado Springs project costs+2% vs U.S. average
Based on El Paso County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 days of work
05
Closeout
Final sign-off, warranty and documentation
Colorado Springs labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$73
Outdoor crews in El Paso County · +3% vs U.S. ($62/hr)
Typical crew
2 × 1 day
On-site time for a typical sod job here.
Labor in the price
$1,200
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Colorado Springs wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the El Paso County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Colorado Springs differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$25
El Paso County crews price 3% above the national average, and labor is 45% of this job.
Basis: Decomposition of the modeled Colorado Springs median against the U.S. median for this scope. · City of Colorado Springs building department, Hometriva methodology
Colorado Springs vs Colorado vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated sod installation in Colorado Springs
$2,700
Likely range $900 – $7,100
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Lawn square footage
- Grass type: St. Augustine, Bahia or Zoysia
- Removal of the existing lawn
- Soil preparation and topdressing
- Irrigation availability for establishment
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Colorado Springs building departmentModeled estimate |
| electrical | City of Colorado Springs building departmentModeled estimate |
| mechanical | City of Colorado Springs building departmentModeled estimate |
| plumbing | City of Colorado Springs building departmentModeled estimate |
| zoning | City of Colorado Springs building departmentModeled estimate |
| fire | City of Colorado Springs building departmentModeled estimate |
Permit requirement in Colorado Springs
Usually no permit is required in Colorado Springs, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Colorado Springs building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$0Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect sod installation.
Cooling load / heat exposure
High62/100
Annual rainfall
Low30/100
Humidity
Low26/100
Roofing and siding work is permitted through the Pikes Peak Regional Building Department rather than the city itself — a common source of homeowner confusion.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Colorado Springs (this page) | x1.020 | $2,700 | $0.50 – $1.50 |
| Denver | x1.111 | $2,900 | $0.50 – $2 |
| Albuquerque | x0.939 | $2,400 | $0.50 – $1.50 |
| Wichita | x0.896 | $2,300 | $0.50 – $1.50 |
What Colorado Springs homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Colorado Springs
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Colorado Springs sod costs
Hometriva does not publish invented city prices. The Colorado Springs estimate for sod installation is produced by this chain, and every input is stored separately:
- National baseline$2,600
Typical U.S. cost for sod installation on a single-family home.
- Local labor factorx1.026
Colorado Springs-area trade labor rates, weighted at 45% of this job.
- Material factorx1.011
Material and delivery pricing into El Paso County, weighted at 55%.
- Regulatory factorx1.046
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.020
Blended Colorado Springs adjustment specific to sod installation.
- Permit component$0 – $0
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, sod installation in Colorado Springs carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for sod installation pricing in Colorado Springs, CO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
What is the best sod for Florida?
St. Augustine is the most common choice for Florida lawns because it tolerates heat, humidity and moderate shade. Bahia costs less and needs less water but looks coarser; Zoysia handles traffic best at a higher price.
Sources
Sources & verification
- City of Colorado Springs building department
- Colorado Springs permit portal
- Colorado Division of Fire Prevention and Control
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.