Sod Installation cost in Quincy, MA
Quincy, MA · updated August 2026
$3,200
Typical local cost
$1,100 – $8,700
Typical range
- per sq ft installed
- $0.50 – $2
- Permit
- Usually no
- Typical timeline
- 1-2 days of work
Installed, local pricing
$0 – $0 in fees
1-2 days of work
Quincy runs +25% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Quincy homeowners pay around $3,200. The local adjustment for this trade is x1.247 — driven mainly by Norfolk County labor rates and 5% exposure to local code requirements.
Estimate your Quincy job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1,500 sq ft installed | $800 – $3,000 |
| 2,000 sq ft installed | $1,000 – $4,000 |
| 2,500 sq ft installed | $1,300 – $5,000 |
| 3,000 sq ft installed | $1,500 – $6,000 |
| 4,000 sq ft installed | $2,000 – $8,000 |
Based on Quincy pricing of $1–$2 per sq ft installed.
Where the money goes
- Labor
- $1,400
- 44% of median
- Materials
- $1,800
- 56% of median
- Permit & fees
- $0
- 0% of median
Quincy project costs+25% vs U.S. average
Based on Norfolk County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-2 days of work
05
Closeout
Final sign-off, warranty and documentation
Quincy labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$73–$95
Outdoor crews in Norfolk County · +34% vs U.S. ($62/hr)
Typical crew
2 × 1 day
On-site time for a typical sod job here.
Labor in the price
$1,400
45% of the median — the rest is material, disposal and permit.
Because labor is 45% of this job, Quincy wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Norfolk County labor factor (x1.338). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Quincy differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$400
Norfolk County crews price 34% above the national average, and labor is 45% of this job.
Material and delivery+$225
Materials are nationally traded, so they move less — but delivery into this market runs 16% over baseline.
Basis: Decomposition of the modeled Quincy median against the U.S. median for this scope. · City of Quincy building department, Hometriva methodology
Quincy vs Massachusetts vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated sod installation in Quincy
$3,200
Likely range $1,100 – $8,700
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Lawn square footage
- Grass type: St. Augustine, Bahia or Zoysia
- Removal of the existing lawn
- Soil preparation and topdressing
- Irrigation availability for establishment
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Quincy building departmentModeled estimate |
| electrical | City of Quincy building departmentModeled estimate |
| mechanical | City of Quincy building departmentModeled estimate |
| plumbing | City of Quincy building departmentModeled estimate |
| zoning | City of Quincy building departmentModeled estimate |
| fire | City of Quincy building departmentModeled estimate |
Permit requirement in Quincy
Usually no permit is required in Quincy, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Quincy building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$0Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect sod installation.
Cooling load / heat exposure
Severe82/100
Annual rainfall
High74/100
Humidity
Severe84/100
Quincy sits in Norfolk County, Massachusetts. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Quincy (this page) | x1.247 | $3,200 | $0.50 – $2 |
| Worcester | x1.265 | $3,300 | $0.50 – $2 |
| Springfield | x1.265 | $3,300 | $0.50 – $2 |
| Cambridge | x1.247 | $3,200 | $0.50 – $2 |
What Quincy homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Quincy
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Quincy sod costs
Hometriva does not publish invented city prices. The Quincy estimate for sod installation is produced by this chain, and every input is stored separately:
- National baseline$2,600
Typical U.S. cost for sod installation on a single-family home.
- Local labor factorx1.338
Quincy-area trade labor rates, weighted at 45% of this job.
- Material factorx1.161
Material and delivery pricing into Norfolk County, weighted at 55%.
- Regulatory factorx1.100
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.247
Blended Quincy adjustment specific to sod installation.
- Permit component$0 – $0
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, sod installation in Quincy carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for sod installation pricing in Quincy, MA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
What is the best sod for Florida?
St. Augustine is the most common choice for Florida lawns because it tolerates heat, humidity and moderate shade. Bahia costs less and needs less water but looks coarser; Zoysia handles traffic best at a higher price.
Sources
Sources & verification
- Massachusetts Board of Building Regulations and Standards
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.