Soffit & Fascia Replacement cost in Raleigh, NC
Raleigh, NC · updated August 2026
$4,600
Typical local cost
$1,800 – $11,000
Typical range
- per linear foot
- $9 – $28
- Permit
- It depends
- Typical timeline
- 2-4 days of work
Installed, local pricing
$90 – $285 in fees
2-4 days of work
Raleigh runs 0% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Raleigh homeowners pay around $4,600. The local adjustment for this trade is x1.001 — driven mainly by Wake County labor rates and 60% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 150 linear foot | $1,400 – $4,200 |
| 200 linear foot | $1,800 – $5,600 |
| 250 linear foot | $2,300 – $7,000 |
| 325 linear foot | $2,900 – $9,100 |
| 425 linear foot | $3,800 – $11,900 |
Based on Raleigh pricing of $9–$28 per linear foot.
Where the money goes
- Labor
- $2,500
- 52% of median
- Materials
- $2,100
- 44% of median
- Permit & fees
- $190
- 4% of median
Raleigh project costs+0% vs U.S. average
Based on Wake County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Raleigh building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-4 days of work
05
Inspection
Final inspection when permitted
06
Closeout
Final sign-off, warranty and documentation
Raleigh labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$58–$76
Exterior crews in Wake County · -3% vs U.S. ($68/hr)
Typical crew
2 × 2.5 days
On-site time for a typical soffit & fascia job here.
Labor in the price
$2,500
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Raleigh wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Wake County labor factor (x0.974). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Raleigh differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$100
Soffit & Fascia Replacement carries 60% exposure to local code requirements, and this jurisdiction's review load indexes at x1.03.
Trade labor rates-$75
Wake County crews price 3% below the national average, and labor is 55% of this job.
Basis: Decomposition of the modeled Raleigh median against the U.S. median for this scope. · City of Raleigh building department, Hometriva methodology
Raleigh vs North Carolina vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated soffit & fascia replacement in Raleigh
$4,790
Likely range $1,990 – $11,190
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear footage around the roof perimeter
- Aluminum versus vinyl soffit
- Rotted fascia or sub-fascia replacement
- Two-story access
- Whether it is bundled with a re-roof
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Raleigh building departmentModeled estimate |
| electrical | City of Raleigh building departmentModeled estimate |
| mechanical | City of Raleigh building departmentModeled estimate |
| plumbing | City of Raleigh building departmentModeled estimate |
| zoning | City of Raleigh building departmentModeled estimate |
| fire | City of Raleigh building departmentModeled estimate |
Permit requirement in Raleigh
It depends on scope. Like-for-like cosmetic work in Raleigh is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Raleigh building departmentModeled estimate
- Permit fee
- Estimated allowance $90–$285Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Final inspection when permitted
Local conditions that change this job
Only the exposures that materially affect soffit & fascia replacement.
Design wind speed exposure
Moderate46/100
Humidity
High74/100
Named-storm exposure
Moderate48/100
Rapid growth and North Carolina's statewide licensing rules keep general-contractor pricing tighter than the Southeast average.
Nearby market comparison
What Raleigh homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Raleigh
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Raleigh soffit & fascia costs
Hometriva does not publish invented city prices. The Raleigh estimate for soffit & fascia replacement is produced by this chain, and every input is stored separately:
- National baseline$4,600
Typical U.S. cost for soffit & fascia replacement on a single-family home.
- Local labor factorx0.974
Raleigh-area trade labor rates, weighted at 55% of this job.
- Material factorx0.991
Material and delivery pricing into Wake County, weighted at 45%.
- Regulatory factorx1.033
Local code, product-approval and inspection load, applied at 60% for this project type.
- Applied multiplierx1.001
Blended Raleigh adjustment specific to soffit & fascia replacement.
- Permit component$90 – $285
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, soffit & fascia replacement in Raleigh carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for soffit & fascia replacement pricing in Raleigh, NC.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does soffit affect my wind mitigation discount?
Yes, indirectly. Soffit failure is a common source of hurricane water intrusion, and some Florida carriers ask about soffit condition during a four-point or wind mitigation inspection.
Sources
Sources & verification
- City of Raleigh building department
- Raleigh permit portal
- North Carolina Department of Insurance, OSFM
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.