Hurricane Shutter Installation cost in Colorado Springs, CO

Colorado Springs, CO · updated August 2026

$8,300

Typical local cost

$3,400 – $19,100

Typical range

per opening covered
$250 – $1,500

Installed, local pricing

Permit
Yes

$105 – $440 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Colorado Springs runs +6% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Colorado Springs homeowners pay around $8,300. The local adjustment for this trade is x1.061 — driven mainly by El Paso County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,500$9,000
8 opening covered$2,000$12,000
9 opening covered$2,300$13,500
12 opening covered$3,000$18,000
16 opening covered$4,000$24,000

Based on Colorado Springs pricing of $250–$1,500 per opening covered.

Where the money goes

Labor
$4,600
54% of median
Materials
$3,700
43% of median
Permit & fees
$275
3% of median

Colorado Springs project costs+6% vs U.S. average

Based on El Paso County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Colorado Springs building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Colorado Springs labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$61–$80

Exterior crews in El Paso County · +3% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$4,600

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Colorado Springs wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the El Paso County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Colorado Springs differs from the national average

The local delta, broken into dollars by driver.

Code and inspection load$325Trade labor rates$100Material and delivery$50
Dollars of the Colorado Springs difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Code and inspection load+$325

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.

  • Trade labor rates+$100

    El Paso County crews price 3% above the national average, and labor is 55% of this job.

  • Material and delivery+$50

    Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline.

Basis: Decomposition of the modeled Colorado Springs median against the U.S. median for this scope. · City of Colorado Springs building department, Hometriva methodology

Colorado Springs vs Colorado vs the U.S.

Colorado Springs$3,400$19,100Colorado average$3,600$20,300U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Colorado Springs

$8,575

Likely range $3,675$19,375

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Colorado Springs building departmentModeled estimate
electricalCity of Colorado Springs building departmentModeled estimate
mechanicalCity of Colorado Springs building departmentModeled estimate
plumbingCity of Colorado Springs building departmentModeled estimate
zoningCity of Colorado Springs building departmentModeled estimate
fireCity of Colorado Springs building departmentModeled estimate

Permit requirement in Colorado Springs

Yes — a permit is required for hurricane shutter installation in Colorado Springs, CO. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Colorado Springs building departmentModeled estimate
Permit fee
Estimated allowance $105$440Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Colorado Springs permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

Moderate52/100

Named-storm exposure

Moderate42/100

Coastal / salt-air exposure

Minimal0/100

Roofing and siding work is permitted through the Pikes Peak Regional Building Department rather than the city itself — a common source of homeowner confusion.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Colorado Springs (this page)x1.061$8,300$250$1,500
Denverx1.191$9,300$300$1,650
Albuquerquex0.944$7,400$250$1,300
Wichitax0.899$7,000$200$1,250

What Colorado Springs homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Colorado Springs

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Colorado Springs shutters costs

Hometriva does not publish invented city prices. The Colorado Springs estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.026

    Colorado Springs-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.011

    Material and delivery pricing into El Paso County, weighted at 45%.

  4. Regulatory factorx1.046

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.061

    Blended Colorado Springs adjustment specific to hurricane shutter installation.

  6. Permit component$105 – $440

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Colorado Springs carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Colorado Springs, CO.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do hurricane shutters require a permit in Florida?

Yes. Shutters are opening protection and their anchoring must meet design pressure requirements, so a building permit with product approval documentation and an attachment inspection is required.

Do shutters lower insurance?

Approved opening protection on all openings usually earns a wind mitigation credit on a Florida homeowners policy. The credit is documented through a wind mitigation inspection.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages