Hurricane Shutter Installation cost in Annapolis, MD

Annapolis, MD · updated August 2026

$9,000

Typical local cost

$3,700 – $20,700

Typical range

per opening covered
$300 – $1,600

Installed, local pricing

Permit
Yes

$105 – $440 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Annapolis runs +15% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Annapolis is $9,000. The local adjustment for this trade is x1.150 — driven mainly by Anne Arundel County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,800$9,600
8 opening covered$2,400$12,800
9 opening covered$2,700$14,400
12 opening covered$3,600$19,200
16 opening covered$4,800$25,600

Based on Annapolis pricing of $300–$1,600 per opening covered.

Where the money goes

Labor
$5,000
54% of median
Materials
$4,000
43% of median
Permit & fees
$275
3% of median

Annapolis project costs+15% vs U.S. average

Based on Anne Arundel County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Annapolis building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Annapolis labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$67–$87

Exterior crews in Anne Arundel County · +12% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$5,000

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Annapolis wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Anne Arundel County labor factor (x1.117). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Annapolis differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$500Code and inspection load$400Material and delivery$225
Dollars of the Annapolis difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$500

    Anne Arundel County crews price 12% above the national average, and labor is 55% of this job.

  • Code and inspection load+$400

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.06.

  • Material and delivery+$225

    Materials are nationally traded, so they move less — but delivery into this market runs 7% over baseline.

Basis: Decomposition of the modeled Annapolis median against the U.S. median for this scope. · City of Annapolis building department, Hometriva methodology

Annapolis vs Maryland vs the U.S.

Annapolis$3,700$20,700Maryland average$3,800$21,500U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Annapolis

$9,275

Likely range $3,975$20,975

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Annapolis building departmentModeled estimate
electricalCity of Annapolis building departmentModeled estimate
mechanicalCity of Annapolis building departmentModeled estimate
plumbingCity of Annapolis building departmentModeled estimate
zoningCity of Annapolis building departmentModeled estimate
fireCity of Annapolis building departmentModeled estimate

Permit requirement in Annapolis

Yes — a permit is required for hurricane shutter installation in Annapolis, MD. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Annapolis building departmentModeled estimate
Permit fee
Estimated allowance $105$440Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Annapolis permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Annapolis sits in Anne Arundel County, Maryland. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Annapolis (this page)x1.150$9,000$300$1,600
Baltimorex1.152$9,000$300$1,600
Columbiax1.195$9,300$300$1,650
Silver Springx1.195$9,300$300$1,650

What Annapolis homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Annapolis

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Annapolis shutters costs

Hometriva does not publish invented city prices. The Annapolis estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.117

    Annapolis-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.066

    Material and delivery pricing into Anne Arundel County, weighted at 45%.

  4. Regulatory factorx1.057

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.150

    Blended Annapolis adjustment specific to hurricane shutter installation.

  6. Permit component$105 – $440

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Annapolis carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Annapolis, MD.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for hurricane shutter installation in Annapolis, MD?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does hurricane shutter installation take?

1-3 days of installation, 3-8 weeks including product lead time and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number and size of openings; shutter type: panel, accordion, roll-down or fabric; motorized versus manual.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages