Hurricane Shutter Installation cost in Dover, NH

Dover, NH · updated August 2026

$8,400

Typical local cost

$3,500 – $19,400

Typical range

per opening covered
$250 – $1,500

Installed, local pricing

Permit
Yes

$85 – $365 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Dover runs +8% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Dover homeowners pay around $8,400. The local adjustment for this trade is x1.079 — driven mainly by Strafford County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,500$9,000
8 opening covered$2,000$12,000
9 opening covered$2,300$13,500
12 opening covered$3,000$18,000
16 opening covered$4,000$24,000

Based on Dover pricing of $250–$1,500 per opening covered.

Where the money goes

Labor
$4,600
53% of median
Materials
$3,800
44% of median
Permit & fees
$225
3% of median

Dover project costs+8% vs U.S. average

Based on Strafford County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Dover building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Dover labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$65–$85

Exterior crews in Strafford County · +9% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$4,600

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Dover wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Strafford County labor factor (x1.091). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Dover differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$400Material and delivery$200Permit fees$25Code and inspection load$25
Dollars of the Dover difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$400

    Strafford County crews price 9% above the national average, and labor is 55% of this job.

  • Material and delivery+$200

    Materials are nationally traded, so they move less — but delivery into this market runs 5% over baseline.

  • Permit fees-$25

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

  • Code and inspection load+$25

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.00.

Basis: Decomposition of the modeled Dover median against the U.S. median for this scope. · City of Dover building department, Hometriva methodology

Dover vs New Hampshire vs the U.S.

Dover$3,500$19,400New Hampshire average$3,600$20,200U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Dover

$8,625

Likely range $3,725$19,625

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Dover building departmentModeled estimate
electricalCity of Dover building departmentModeled estimate
mechanicalCity of Dover building departmentModeled estimate
plumbingCity of Dover building departmentModeled estimate
zoningCity of Dover building departmentModeled estimate
fireCity of Dover building departmentModeled estimate

Permit requirement in Dover

Yes — a permit is required for hurricane shutter installation in Dover, NH. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Dover building departmentModeled estimate
Permit fee
Estimated allowance $85$365Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Dover permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Dover sits in Strafford County, New Hampshire. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Dover (this page)x1.079$8,400$250$1,500
Manchesterx1.123$8,800$300$1,550
Nashuax1.123$8,800$300$1,550
Concordx1.079$8,400$250$1,500

What Dover homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Dover

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Dover shutters costs

Hometriva does not publish invented city prices. The Dover estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.091

    Dover-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.055

    Material and delivery pricing into Strafford County, weighted at 45%.

  4. Regulatory factorx1.004

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.079

    Blended Dover adjustment specific to hurricane shutter installation.

  6. Permit component$85 – $365

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Dover carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Dover, NH.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do hurricane shutters require a permit in Florida?

Yes. Shutters are opening protection and their anchoring must meet design pressure requirements, so a building permit with product approval documentation and an attachment inspection is required.

Do shutters lower insurance?

Approved opening protection on all openings usually earns a wind mitigation credit on a Florida homeowners policy. The credit is documented through a wind mitigation inspection.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages