Hurricane Shutter Installation cost in Pawtucket, RI

Pawtucket, RI · updated August 2026

$9,700

Typical local cost

$4,000 – $22,400

Typical range

per opening covered
$300 – $1,750

Installed, local pricing

Permit
Yes

$110 – $460 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Pawtucket runs +25% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Pawtucket is $9,700. The local adjustment for this trade is x1.246 — driven mainly by Providence County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,800 – $10,500
8 opening covered$2,400 – $14,000
9 opening covered$2,700 – $15,800
12 opening covered$3,600 – $21,000
16 opening covered$4,800 – $28,000

Based on Pawtucket pricing of $300–$1,750 per opening covered.

Where the money goes

Labor
$5,300
53% of median
Materials
$4,400
44% of median
Permit & fees
$285
3% of median

Pawtucket project costs+25% vs U.S. average

Based on Providence County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Pawtucket building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Pawtucket labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$73–$95

Exterior crews in Providence County · +22% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$5,300

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Pawtucket wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Providence County labor factor (x1.221). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Pawtucket differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$950Code and inspection load$500Material and delivery$400Permit fees$25
Dollars of the Pawtucket difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$950

    Providence County crews price 22% above the national average, and labor is 55% of this job.

  • Code and inspection load+$500

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.07.

  • Material and delivery+$400

    Materials are nationally traded, so they move less — but delivery into this market runs 11% over baseline.

  • Permit fees+$25

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Pawtucket median against the U.S. median for this scope. · City of Pawtucket building department, Hometriva methodology

Pawtucket vs Rhode Island vs the U.S.

Pawtucket$4,000–$22,400Rhode Island average$4,000–$22,400U.S. average$3,200–$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Pawtucket

$9,985

Likely range $4,285 – $22,685

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Pawtucket building departmentModeled estimate
electricalCity of Pawtucket building departmentModeled estimate
mechanicalCity of Pawtucket building departmentModeled estimate
plumbingCity of Pawtucket building departmentModeled estimate
zoningCity of Pawtucket building departmentModeled estimate
fireCity of Pawtucket building departmentModeled estimate

Permit requirement in Pawtucket

Yes — a permit is required for hurricane shutter installation in Pawtucket, RI. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Pawtucket building departmentModeled estimate
Permit fee
Estimated allowance $110–$460Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Pawtucket permit guide for hurricane shutter installation →

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Pawtucket sits in Providence County, Rhode Island. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Pawtucket (this page)x1.246$9,700$300 – $1,750
Providencex1.263$9,900$300 – $1,750
Cranstonx1.246$9,700$300 – $1,750
Warwickx1.246$9,700$300 – $1,750
+ Had hurricane shutter installation done in Pawtucket? Add what you paid or were quoted

Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.

No name, email or address is collected. Reports are reviewed before they count.
No name, email or address is collected.

How Hometriva estimates Pawtucket shutters costs

Hometriva does not publish invented city prices. The Pawtucket estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.221

    Pawtucket-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.111

    Material and delivery pricing into Providence County, weighted at 45%.

  4. Regulatory factorx1.071

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.246

    Blended Pawtucket adjustment specific to hurricane shutter installation.

  6. Permit component$110 – $460

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Pawtucket carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Pawtucket, RI.

  • • National unit-cost baselines against current trade pricing
  • • Local labor and materials factors for the market
  • • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for hurricane shutter installation in Pawtucket, RI?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does hurricane shutter installation take?

1-3 days of installation, 3-8 weeks including product lead time and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number and size of openings; shutter type: panel, accordion, roll-down or fabric; motorized versus manual.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages