Hurricane Shutter Installation cost in Rapid City, SD

Rapid City, SD · updated August 2026

$7,000

Typical local cost

$2,900 – $16,100

Typical range

per opening covered
$200 – $1,250

Installed, local pricing

Permit
Yes

$80 – $335 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Rapid City runs -10% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Rapid City homeowners pay around $7,000. The local adjustment for this trade is x0.897 — driven mainly by Pennington County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,200$7,500
8 opening covered$1,600$10,000
9 opening covered$1,800$11,300
12 opening covered$2,400$15,000
16 opening covered$3,200$20,000

Based on Rapid City pricing of $200–$1,250 per opening covered.

Where the money goes

Labor
$3,900
54% of median
Materials
$3,100
43% of median
Permit & fees
$210
3% of median

Rapid City project costs-10% vs U.S. average

Based on Pennington County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Rapid City building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Rapid City labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$52–$67

Exterior crews in Pennington County · -13% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$3,900

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Rapid City wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Pennington County labor factor (x0.870). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Rapid City differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$550Material and delivery$150Code and inspection load$100Permit fees$50
Dollars of the Rapid City difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates-$550

    Pennington County crews price 13% below the national average, and labor is 55% of this job.

  • Material and delivery-$150

    Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.

  • Code and inspection load-$100

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x0.98.

  • Permit fees-$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Rapid City median against the U.S. median for this scope. · City of Rapid City building department, Hometriva methodology

Rapid City vs South Dakota vs the U.S.

Rapid City$2,900$16,100South Dakota average$2,900$16,100U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Rapid City

$7,210

Likely range $3,110$16,310

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Rapid City building departmentModeled estimate
electricalCity of Rapid City building departmentModeled estimate
mechanicalCity of Rapid City building departmentModeled estimate
plumbingCity of Rapid City building departmentModeled estimate
zoningCity of Rapid City building departmentModeled estimate
fireCity of Rapid City building departmentModeled estimate

Permit requirement in Rapid City

Yes — a permit is required for hurricane shutter installation in Rapid City, SD. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Rapid City building departmentModeled estimate
Permit fee
Estimated allowance $80$335Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Rapid City permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Rapid City sits in Pennington County, South Dakota. Snow load, hail and deep freeze-thaw cycling drive roofing, insulation and exterior envelope specifications well above Sun Belt minimums. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Rapid City (this page)x0.897$7,000$200$1,250
Sioux Fallsx0.923$7,200$250$1,300
Aberdeenx0.857$6,700$200$1,200
Brookingsx0.857$6,700$200$1,200

What Rapid City homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Rapid City

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Rapid City shutters costs

Hometriva does not publish invented city prices. The Rapid City estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx0.870

    Rapid City-area trade labor rates, weighted at 55% of this job.

  3. Material factorx0.960

    Material and delivery pricing into Pennington County, weighted at 45%.

  4. Regulatory factorx0.984

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx0.897

    Blended Rapid City adjustment specific to hurricane shutter installation.

  6. Permit component$80 – $335

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Rapid City carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Rapid City, SD.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do hurricane shutters require a permit in Florida?

Yes. Shutters are opening protection and their anchoring must meet design pressure requirements, so a building permit with product approval documentation and an attachment inspection is required.

Do shutters lower insurance?

Approved opening protection on all openings usually earns a wind mitigation credit on a Florida homeowners policy. The credit is documented through a wind mitigation inspection.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages