Hurricane Shutter Installation cost in Fort Worth, TX

Fort Worth, TX · updated August 2026

$7,800

Typical local cost

$3,200 – $18,000

Typical range

per opening covered
$250 – $1,400

Installed, local pricing

Permit
Yes

$100 – $430 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Fort Worth runs 0% against the U.S. average · data confidence Medium · modeled estimate, not a quote

Most Fort Worth homeowners pay around $7,800. The local adjustment for this trade is x1.002 — driven mainly by Tarrant County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,500$8,400
8 opening covered$2,000$11,200
9 opening covered$2,300$12,600
12 opening covered$3,000$16,800
16 opening covered$4,000$22,400

Based on Fort Worth pricing of $250–$1,400 per opening covered.

Where the money goes

Labor
$4,300
53% of median
Materials
$3,500
43% of median
Permit & fees
$265
3% of median

Fort Worth project costs+0% vs U.S. average

Based on Tarrant County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Fort Worth building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Fort Worth labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$57–$73

Exterior crews in Tarrant County · -5% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$4,300

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Fort Worth wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Tarrant County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Fort Worth differs from the national average

The local delta, broken into dollars by driver.

Code and inspection load$325Trade labor rates$225Material and delivery$75
Dollars of the Fort Worth difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Code and inspection load+$325

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.

  • Trade labor rates-$225

    Tarrant County crews price 5% below the national average, and labor is 55% of this job.

  • Material and delivery-$75

    Materials are nationally traded, so they move less — but delivery into this market runs 2% under baseline.

Basis: Decomposition of the modeled Fort Worth median against the U.S. median for this scope. · City of Fort Worth building department, Hometriva methodology

Fort Worth vs Texas vs the U.S.

Fort Worth$3,200$18,000Texas average$3,100$17,700U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Fort Worth

$8,065

Likely range $3,465$18,265

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Fort Worth building departmentModeled estimate
electricalCity of Fort Worth building departmentModeled estimate
mechanicalCity of Fort Worth building departmentModeled estimate
plumbingCity of Fort Worth building departmentModeled estimate
zoningCity of Fort Worth building departmentModeled estimate
fireCity of Fort Worth building departmentModeled estimate

Permit requirement in Fort Worth

Yes — a permit is required for hurricane shutter installation in Fort Worth, TX. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Fort Worth building departmentModeled estimate
Permit fee
Estimated allowance $100$430Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Fort Worth permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High66/100

Named-storm exposure

High74/100

Coastal / salt-air exposure

Minimal8/100

Same hail belt as Dallas with a higher owner-occupancy share, which pushes more full replacements through insurance claims.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Fort Worth (this page)x1.002$7,800$250$1,400
Dallasx1.030$8,000$250$1,450
Austinx1.142$8,900$300$1,600
Oklahoma Cityx0.925$7,200$250$1,300

What Fort Worth homeowners actually paid

Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Fort Worth

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Fort Worth shutters costs

Hometriva does not publish invented city prices. The Fort Worth estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx0.948

    Fort Worth-area trade labor rates, weighted at 55% of this job.

  3. Material factorx0.981

    Material and delivery pricing into Tarrant County, weighted at 45%.

  4. Regulatory factorx1.045

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.002

    Blended Fort Worth adjustment specific to hurricane shutter installation.

  6. Permit component$100 – $430

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Fort Worth carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Fort Worth, TX.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do hurricane shutters require a permit in Florida?

Yes. Shutters are opening protection and their anchoring must meet design pressure requirements, so a building permit with product approval documentation and an attachment inspection is required.

Do shutters lower insurance?

Approved opening protection on all openings usually earns a wind mitigation credit on a Florida homeowners policy. The credit is documented through a wind mitigation inspection.

Sources

Sources & verification

Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.

Related pages