Hurricane Shutter Installation cost in Rutland, VT

Rutland, VT · updated August 2026

$8,100

Typical local cost

$3,300 – $18,700

Typical range

per opening covered
$250 – $1,450

Installed, local pricing

Permit
Yes

$80 – $335 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Rutland runs +4% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Rutland is $8,100. The local adjustment for this trade is x1.040 — driven mainly by Rutland County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,500 – $8,700
8 opening covered$2,000 – $11,600
9 opening covered$2,300 – $13,100
12 opening covered$3,000 – $17,400
16 opening covered$4,000 – $23,200

Based on Rutland pricing of $250–$1,450 per opening covered.

Where the money goes

Labor
$4,500
54% of median
Materials
$3,600
43% of median
Permit & fees
$210
3% of median

Rutland project costs+4% vs U.S. average

Based on Rutland County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Rutland building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Rutland labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$64–$83

Exterior crews in Rutland County · +6% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$4,500

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Rutland wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Rutland County labor factor (x1.065). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Rutland differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$275Material and delivery$150Code and inspection load$100Permit fees$50
Dollars of the Rutland difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$275

    Rutland County crews price 6% above the national average, and labor is 55% of this job.

  • Material and delivery+$150

    Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline.

  • Code and inspection load-$100

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x0.98.

  • Permit fees-$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Rutland median against the U.S. median for this scope. · City of Rutland building department, Hometriva methodology

Rutland vs Vermont vs the U.S.

Rutland$3,300–$18,700Vermont average$3,500–$19,500U.S. average$3,200–$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Rutland

$8,310

Likely range $3,510 – $18,910

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Rutland building departmentModeled estimate
electricalCity of Rutland building departmentModeled estimate
mechanicalCity of Rutland building departmentModeled estimate
plumbingCity of Rutland building departmentModeled estimate
zoningCity of Rutland building departmentModeled estimate
fireCity of Rutland building departmentModeled estimate

Permit requirement in Rutland

Yes — a permit is required for hurricane shutter installation in Rutland, VT. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Rutland building departmentModeled estimate
Permit fee
Estimated allowance $80–$335Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Rutland permit guide for hurricane shutter installation →

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Rutland sits in Rutland County, Vermont. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Rutland (this page)x1.040$8,100$250 – $1,450
Montpelierx1.040$8,100$250 – $1,450
South Burlingtonx1.040$8,100$250 – $1,450
Burlingtonx1.040$8,100$250 – $1,450
+ Had hurricane shutter installation done in Rutland? Add what you paid or were quoted

Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.

No name, email or address is collected. Reports are reviewed before they count.
No name, email or address is collected.

How Hometriva estimates Rutland shutters costs

Hometriva does not publish invented city prices. The Rutland estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.065

    Rutland-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.044

    Material and delivery pricing into Rutland County, weighted at 45%.

  4. Regulatory factorx0.984

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.040

    Blended Rutland adjustment specific to hurricane shutter installation.

  6. Permit component$80 – $335

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Rutland carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Rutland, VT.

  • • National unit-cost baselines against current trade pricing
  • • Local labor and materials factors for the market
  • • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for hurricane shutter installation in Rutland, VT?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does hurricane shutter installation take?

1-3 days of installation, 3-8 weeks including product lead time and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number and size of openings; shutter type: panel, accordion, roll-down or fabric; motorized versus manual.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages