Hurricane Shutter Installation cost in Gresham, OR

Gresham, OR · updated August 2026

$9,600

Typical local cost

$3,900 – $22,200

Typical range

per opening covered
$300 – $1,700

Installed, local pricing

Permit
Yes

$115 – $485 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Gresham runs +23% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Gresham is $9,600. The local adjustment for this trade is x1.231 — driven mainly by Multnomah County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,800$10,200
8 opening covered$2,400$13,600
9 opening covered$2,700$15,300
12 opening covered$3,600$20,400
16 opening covered$4,800$27,200

Based on Gresham pricing of $300–$1,700 per opening covered.

Where the money goes

Labor
$5,300
54% of median
Materials
$4,300
43% of median
Permit & fees
$300
3% of median

Gresham project costs+23% vs U.S. average

Based on Multnomah County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Gresham building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Gresham labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$71–$92

Exterior crews in Multnomah County · +18% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$5,300

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Gresham wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Multnomah County labor factor (x1.182). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Gresham differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$775Code and inspection load$600Material and delivery$325Permit fees$50
Dollars of the Gresham difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$775

    Multnomah County crews price 18% above the national average, and labor is 55% of this job.

  • Code and inspection load+$600

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.

  • Material and delivery+$325

    Materials are nationally traded, so they move less — but delivery into this market runs 9% over baseline.

  • Permit fees+$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Gresham median against the U.S. median for this scope. · City of Gresham building department, Hometriva methodology

Gresham vs Oregon vs the U.S.

Gresham$3,900$22,200Oregon average$3,900$22,200U.S. average$3,200$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Gresham

$9,900

Likely range $4,200$22,500

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Gresham building departmentModeled estimate
electricalCity of Gresham building departmentModeled estimate
mechanicalCity of Gresham building departmentModeled estimate
plumbingCity of Gresham building departmentModeled estimate
zoningCity of Gresham building departmentModeled estimate
fireCity of Gresham building departmentModeled estimate

Permit requirement in Gresham

Yes — a permit is required for hurricane shutter installation in Gresham, OR. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Gresham building departmentModeled estimate
Permit fee
Estimated allowance $115$485Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Gresham permit guide for hurricane shutter installation

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Gresham sits in Multnomah County, Oregon. Persistent rainfall and moisture management dominate exterior detailing, while seismic provisions apply to structural and foundation work. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Gresham (this page)x1.231$9,600$300$1,700
Vancouverx1.282$10,000$300$1,800
Portlandx1.292$10,100$300$1,800
Beavertonx1.231$9,600$300$1,700

What Gresham homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Gresham

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Gresham shutters costs

Hometriva does not publish invented city prices. The Gresham estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.182

    Gresham-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.094

    Material and delivery pricing into Multnomah County, weighted at 45%.

  4. Regulatory factorx1.086

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.231

    Blended Gresham adjustment specific to hurricane shutter installation.

  6. Permit component$115 – $485

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Gresham carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Gresham, OR.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for hurricane shutter installation in Gresham, OR?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does hurricane shutter installation take?

1-3 days of installation, 3-8 weeks including product lead time and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number and size of openings; shutter type: panel, accordion, roll-down or fabric; motorized versus manual.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages