Hurricane Shutter Installation cost in Kent, WA

Kent, WA · updated August 2026

$9,800

Typical local cost

$4,000 – $22,500

Typical range

per opening covered
$300 – $1,750

Installed, local pricing

Permit
Yes

$115 – $485 in fees

Typical timeline
1-3 days of installation

1-3 days of installation, 3-8 weeks including product lead time and permitting

Kent runs +25% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Kent is $9,800. The local adjustment for this trade is x1.252 — driven mainly by King County labor rates and 90% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
6 opening covered$1,800 – $10,500
8 opening covered$2,400 – $14,000
9 opening covered$2,700 – $15,800
12 opening covered$3,600 – $21,000
16 opening covered$4,800 – $28,000

Based on Kent pricing of $300–$1,750 per opening covered.

Where the money goes

Labor
$5,400
53% of median
Materials
$4,400
44% of median
Permit & fees
$300
3% of median

Kent project costs+25% vs U.S. average

Based on King County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Kent building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    1-3 days of installation, 3-8 weeks including product lead time and permitting

  5. 05

    Inspection

    Attachment inspection, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Kent labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$72–$94

Exterior crews in King County · +21% vs U.S. ($68/hr)

Typical crew

2 × 4 days

On-site time for a typical shutters job here.

Labor in the price

$5,400

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Kent wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the King County labor factor (x1.208). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Kent differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$900Code and inspection load$600Material and delivery$375Permit fees$50
Dollars of the Kent difference owned by each driver, versus the U.S. median for hurricane shutter installation.
  • Trade labor rates+$900

    King County crews price 21% above the national average, and labor is 55% of this job.

  • Code and inspection load+$600

    Hurricane Shutter Installation carries 90% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.

  • Material and delivery+$375

    Materials are nationally traded, so they move less — but delivery into this market runs 10% over baseline.

  • Permit fees+$50

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Kent median against the U.S. median for this scope. · City of Kent building department, Hometriva methodology

Kent vs Washington vs the U.S.

Kent$4,000–$22,500Washington average$4,000–$22,400U.S. average$3,200–$18,000
Modeled ranges for hurricane shutter installation. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated hurricane shutter installation in Kent

$10,100

Likely range $4,300 – $22,800

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Number and size of openings
  • Shutter type: panel, accordion, roll-down or fabric
  • Motorized versus manual
  • Substrate: block, stucco or frame
  • Design pressure requirements for your wind zone

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Kent building departmentModeled estimate
electricalCity of Kent building departmentModeled estimate
mechanicalCity of Kent building departmentModeled estimate
plumbingCity of Kent building departmentModeled estimate
zoningCity of Kent building departmentModeled estimate
fireCity of Kent building departmentModeled estimate

Permit requirement in Kent

Yes — a permit is required for hurricane shutter installation in Kent, WA. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.

Permitting authority
City of Kent building departmentModeled estimate
Permit fee
Estimated allowance $115–$485Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Attachment inspection
  2. Final inspection
Full Kent permit guide for hurricane shutter installation →

Local conditions that change this job

Only the exposures that materially affect hurricane shutter installation.

Design wind speed exposure

High70/100

Named-storm exposure

High70/100

Coastal / salt-air exposure

Moderate45/100

Kent sits in King County, Washington. Persistent rainfall and moisture management dominate exterior detailing, while seismic provisions apply to structural and foundation work. Work outside city limits is permitted by the county building department rather than the city.

Nearby market comparison

MarketLocal factorMedianPer opening covered
Kent (this page)x1.252$9,800$300 – $1,750
Rentonx1.252$9,800$300 – $1,750
Bellevuex1.282$10,000$300 – $1,800
Seattlex1.399$10,900$350 – $1,950
+ Had hurricane shutter installation done in Kent? Add what you paid or were quoted

Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.

No name, email or address is collected. Reports are reviewed before they count.
No name, email or address is collected.

How Hometriva estimates Kent shutters costs

Hometriva does not publish invented city prices. The Kent estimate for hurricane shutter installation is produced by this chain, and every input is stored separately:

  1. National baseline$7,800

    Typical U.S. cost for hurricane shutter installation on a single-family home.

  2. Local labor factorx1.208

    Kent-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.105

    Material and delivery pricing into King County, weighted at 45%.

  4. Regulatory factorx1.086

    Local code, product-approval and inspection load, applied at 90% for this project type.

  5. Applied multiplierx1.252

    Blended Kent adjustment specific to hurricane shutter installation.

  6. Permit component$115 – $485

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, hurricane shutter installation in Kent carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for hurricane shutter installation pricing in Kent, WA.

  • • National unit-cost baselines against current trade pricing
  • • Local labor and materials factors for the market
  • • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for hurricane shutter installation in Kent, WA?

In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.

How long does hurricane shutter installation take?

1-3 days of installation, 3-8 weeks including product lead time and permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are number and size of openings; shutter type: panel, accordion, roll-down or fabric; motorized versus manual.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages