Stucco Repair cost in Jacksonville, FL

Jacksonville, FL · updated August 2026

$4,100

Typical local cost

$900 – $15,600

Typical range

per sq ft repaired
$7 – $21.50

Installed, local pricing

Permit
It depends

$85 – $295 in fees

Typical timeline
2-6 days of work plus cure time

2-6 days of work plus cure time, 1-4 weeks with permitting

Calculate my stucco cost

Jacksonville runs -3% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Jacksonville is $4,100. The local adjustment for this trade is x0.975 — driven mainly by Duval County labor rates and 20% exposure to local code requirements.

Estimate your Jacksonville job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Square footage

180 sq ft

With waste allowance
198 sq ft
Square yards
20
Perimeter (per area)
54 ft
Square meters
16.72

Priced for Jacksonville (local adjustment x0.975).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
175 sq ft repaired$1,200$3,800
225 sq ft repaired$1,600$4,800
300 sq ft repaired$2,100$6,500
375 sq ft repaired$2,600$8,100
500 sq ft repaired$3,500$10,800

Based on Jacksonville pricing of $7–$22 per sq ft repaired.

Where the money goes

Labor
$2,300
54% of median
Materials
$1,800
42% of median
Permit & fees
$190
4% of median

Jacksonville project costs-3% vs U.S. average

Based on Duval County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of Jacksonville Building Inspection Division

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    2-6 days of work plus cure time, 1-4 weeks with permitting

  5. 05

    Inspection

    Lath / wire inspection when re-lathing, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

Jacksonville labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$57–$73

Exterior crews in Duval County · -5% vs U.S. ($68/hr)

Typical crew

2 × 2 days

On-site time for a typical stucco job here.

Labor in the price

$2,300

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, Jacksonville wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Duval County labor factor (x0.948). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Jacksonville differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$125
Dollars of the Jacksonville difference owned by each driver, versus the U.S. median for stucco repair.
  • Trade labor rates-$125

    Duval County crews price 5% below the national average, and labor is 55% of this job.

Basis: Decomposition of the modeled Jacksonville median against the U.S. median for this scope. · City of Jacksonville Building Inspection Division, Hometriva methodology

Jacksonville vs Florida vs the U.S.

Jacksonville$900$15,600Florida average$1,000$17,000U.S. average$900$16,000
Modeled ranges for stucco repair. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated stucco repair in Jacksonville

$4,290

Likely range $1,090$15,790

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Extent of delamination behind the visible crack
  • Whether lath and weather barrier need replacement
  • Two-story access and scaffolding
  • Color matching versus full re-coat
  • Underlying water intrusion repairs

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Jacksonville Building Inspection DivisionConfirmed department
electricalCity of Jacksonville Building Inspection DivisionConfirmed department
mechanicalCity of Jacksonville Building Inspection DivisionConfirmed department
plumbingCity of Jacksonville Building Inspection DivisionConfirmed department
zoningCity of Jacksonville Building Inspection DivisionConfirmed department
fireCity of Jacksonville Building Inspection DivisionConfirmed department

Permit requirement in Jacksonville

It depends on scope. Like-for-like cosmetic work in Jacksonville is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.

Permitting authority
City of Jacksonville Building Inspection DivisionConfirmed department
Permit fee
Based on declared project valuationJacksonville and Duval County are a consolidated government — one department serves both. Typical range for this scope: $85$295.

Inspections

  1. Lath / wire inspection when re-lathing
  2. Final inspection
Full Jacksonville permit guide for stucco repair

Local conditions that change this job

Only the exposures that materially affect stucco repair.

Humidity

Severe84/100

Annual rainfall

High74/100

Coastal / salt-air exposure

High66/100

Jacksonville is a consolidated city-county government, so one building department covers nearly all of Duval County.

Nearby market comparison

MarketLocal factorMedianPer sq ft repaired
Jacksonville (this page)x0.975$4,100$7$21.50
St. Augustinex1.021$4,300$7$22.50
Gainesvillex0.943$4,000$6.50$20.50
Daytona Beachx0.999$4,200$7$22

What Jacksonville homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Jacksonville

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Jacksonville stucco costs

Hometriva does not publish invented city prices. The Jacksonville estimate for stucco repair is produced by this chain, and every input is stored separately:

  1. National baseline$4,200

    Typical U.S. cost for stucco repair on a single-family home.

  2. Local labor factorx0.948

    Jacksonville-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.001

    Material and delivery pricing into Duval County, weighted at 45%.

  4. Regulatory factorx1.015

    Local code, product-approval and inspection load, applied at 20% for this project type.

  5. Applied multiplierx0.975

    Blended Jacksonville adjustment specific to stucco repair.

  6. Permit component$85 – $295

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, stucco repair in Jacksonville carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for stucco repair pricing in Jacksonville, FL.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Do I need a permit for stucco repair in Florida?

Small cosmetic patches typically do not require a permit, but most jurisdictions require one once the repair exposes lath, exceeds a set square footage, or involves replacing the weather-resistive barrier.

How long does stucco repair take?

2-6 days of work plus cure time, 1-4 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are extent of delamination behind the visible crack; whether lath and weather barrier need replacement; two-story access and scaffolding.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages