Stucco Repair cost in Port Charlotte, FL
Port Charlotte, FL · updated August 2026
$4,300
Typical local cost
$900 – $16,400
Typical range
- per sq ft repaired
- $7 – $22.50
- Permit
- It depends
- Typical timeline
- 2-6 days of work plus cure time
Installed, local pricing
$90 – $320 in fees
2-6 days of work plus cure time, 1-4 weeks with permitting
Port Charlotte runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Port Charlotte is $4,300. The local adjustment for this trade is x1.023 — driven mainly by Charlotte County labor rates and 20% exposure to local code requirements.
Estimate your Port Charlotte job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Port Charlotte (local adjustment x1.023).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 175 sq ft repaired | $1,200 – $3,900 |
| 225 sq ft repaired | $1,600 – $5,100 |
| 300 sq ft repaired | $2,100 – $6,800 |
| 375 sq ft repaired | $2,600 – $8,400 |
| 500 sq ft repaired | $3,500 – $11,300 |
Based on Port Charlotte pricing of $7–$23 per sq ft repaired.
Where the money goes
- Labor
- $2,400
- 53% of median
- Materials
- $1,900
- 42% of median
- Permit & fees
- $205
- 5% of median
Port Charlotte project costs+2% vs U.S. average
Based on Charlotte County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with Charlotte County Building Construction Services
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-6 days of work plus cure time, 1-4 weeks with permitting
05
Inspection
Lath / wire inspection when re-lathing, Final inspection
06
Closeout
Final sign-off, warranty and documentation
Port Charlotte labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$60–$78
Exterior crews in Charlotte County · 0% vs U.S. ($68/hr)
Typical crew
2 × 2 days
On-site time for a typical stucco job here.
Labor in the price
$2,400
55% of the median — the rest is material, disposal and permit.
Because labor is 55% of this job, Port Charlotte wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national exterior crew rates adjusted by the Charlotte County labor factor (x1.000). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Port Charlotte differs from the national average
The local delta, broken into dollars by driver.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 3% over baseline because of coastal logistics.
Code and inspection load+$50
Stucco Repair carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Basis: Decomposition of the modeled Port Charlotte median against the U.S. median for this scope. · Charlotte County Building Construction Services, Hometriva methodology
Port Charlotte vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated stucco repair in Port Charlotte
$4,505
Likely range $1,105 – $16,605
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Extent of delamination behind the visible crack
- Whether lath and weather barrier need replacement
- Two-story access and scaffolding
- Color matching versus full re-coat
- Underlying water intrusion repairs
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | Charlotte County Building Construction ServicesConfirmed department |
| electrical | Charlotte County Building Construction ServicesConfirmed department |
| mechanical | Charlotte County Building Construction ServicesConfirmed department |
| plumbing | Charlotte County Building Construction ServicesConfirmed department |
| zoning | Charlotte County zoningInherited from state rule |
| fire | Charlotte County Building Construction ServicesConfirmed department |
Permit requirement in Port Charlotte
It depends on scope. Like-for-like cosmetic work in Port Charlotte is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- Charlotte County Building Construction ServicesConfirmed department
- Permit fee
- Based on declared project valuationPort Charlotte is an unincorporated community; Charlotte County issues and inspects the permit. Typical range for this scope: $90–$320.
Inspections
- Lath / wire inspection when re-lathing
- Final inspection
Local conditions that change this job
Only the exposures that materially affect stucco repair.
Humidity
Severe84/100
Annual rainfall
High74/100
Coastal / salt-air exposure
High78/100
Charlotte County is unincorporated for most residential addresses, so the county building division reviews the majority of permits.
Nearby market comparison
| Market | Local factor | Median | Per sq ft repaired |
|---|---|---|---|
| Port Charlotte (this page) | x1.023 | $4,300 | $7 – $22.50 |
| Venice | x1.087 | $4,600 | $7.50 – $24 |
| Fort Myers | x1.119 | $4,700 | $8 – $24.50 |
| Cape Coral | x1.099 | $4,600 | $7.50 – $24 |
What Port Charlotte homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Port Charlotte
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Port Charlotte stucco costs
Hometriva does not publish invented city prices. The Port Charlotte estimate for stucco repair is produced by this chain, and every input is stored separately:
- National baseline$4,200
Typical U.S. cost for stucco repair on a single-family home.
- Local labor factorx1.000
Port Charlotte-area trade labor rates, weighted at 55% of this job.
- Material factorx1.027
Material and delivery pricing into Charlotte County, weighted at 45%.
- Regulatory factorx1.053
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx1.023
Blended Port Charlotte adjustment specific to stucco repair.
- Permit component$90 – $320
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, stucco repair in Port Charlotte carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for stucco repair pricing in Port Charlotte, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit for stucco repair in Florida?
Small cosmetic patches typically do not require a permit, but most jurisdictions require one once the repair exposes lath, exceeds a set square footage, or involves replacing the weather-resistive barrier.
How long does stucco repair take?
2-6 days of work plus cure time, 1-4 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are extent of delamination behind the visible crack; whether lath and weather barrier need replacement; two-story access and scaffolding.
Sources
Sources & verification
- Charlotte County Building Construction Services
- Port Charlotte permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.