Stucco Repair cost in St. Paul, MN

St. Paul, MN · updated August 2026

$4,500

Typical local cost

$1,000 – $17,300

Typical range

per sq ft repaired
$7.50 – $24

Installed, local pricing

Permit
It depends

$90 – $315 in fees

Typical timeline
2-6 days of work plus cure time

2-6 days of work plus cure time, 1-4 weeks with permitting

Calculate my stucco cost

St. Paul runs +8% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for St. Paul is $4,500. The local adjustment for this trade is x1.083 — driven mainly by Ramsey County labor rates and 20% exposure to local code requirements.

Estimate your St. Paul job

Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.

Square footage

180 sq ft

With waste allowance
198 sq ft
Square yards
20
Perimeter (per area)
54 ft
Square meters
16.72

Priced for St. Paul (local adjustment x1.083).

Estimates only. Local pricing, site conditions and code requirements change the real number.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
175 sq ft repaired$1,300$4,200
225 sq ft repaired$1,700$5,400
300 sq ft repaired$2,300$7,200
375 sq ft repaired$2,800$9,000
500 sq ft repaired$3,800$12,000

Based on St. Paul pricing of $8–$24 per sq ft repaired.

Where the money goes

Labor
$2,500
53% of median
Materials
$2,000
43% of median
Permit & fees
$205
4% of median

St. Paul project costs+8% vs U.S. average

Based on Ramsey County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Permit application

    Filed with City of St. Paul building department

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    2-6 days of work plus cure time, 1-4 weeks with permitting

  5. 05

    Inspection

    Lath / wire inspection when re-lathing, Final inspection

  6. 06

    Closeout

    Final sign-off, warranty and documentation

St. Paul labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$65–$85

Exterior crews in Ramsey County · +9% vs U.S. ($68/hr)

Typical crew

2 × 2 days

On-site time for a typical stucco job here.

Labor in the price

$2,500

55% of the median — the rest is material, disposal and permit.

Because labor is 55% of this job, St. Paul wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national exterior crew rates adjusted by the Ramsey County labor factor (x1.091). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why St. Paul differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$200Material and delivery$100Code and inspection load$25
Dollars of the St. Paul difference owned by each driver, versus the U.S. median for stucco repair.
  • Trade labor rates+$200

    Ramsey County crews price 9% above the national average, and labor is 55% of this job.

  • Material and delivery+$100

    Materials are nationally traded, so they move less — but delivery into this market runs 5% over baseline.

  • Code and inspection load+$25

    Stucco Repair carries 20% exposure to local code requirements, and this jurisdiction's review load indexes at x1.04.

Basis: Decomposition of the modeled St. Paul median against the U.S. median for this scope. · City of St. Paul building department, Hometriva methodology

St. Paul vs Minnesota vs the U.S.

St. Paul$1,000$17,300Minnesota average$1,000$17,000U.S. average$900$16,000
Modeled ranges for stucco repair. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated stucco repair in St. Paul

$4,705

Likely range $1,205$17,505

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Extent of delamination behind the visible crack
  • Whether lath and weather barrier need replacement
  • Two-story access and scaffolding
  • Color matching versus full re-coat
  • Underlying water intrusion repairs

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of St. Paul building departmentModeled estimate
electricalCity of St. Paul building departmentModeled estimate
mechanicalCity of St. Paul building departmentModeled estimate
plumbingCity of St. Paul building departmentModeled estimate
zoningCity of St. Paul building departmentModeled estimate
fireCity of St. Paul building departmentModeled estimate

Permit requirement in St. Paul

It depends on scope. Like-for-like cosmetic work in St. Paul is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.

Permitting authority
City of St. Paul building departmentModeled estimate
Permit fee
Estimated allowance $90$315Modeled from comparable fee schedules — not an official quoted fee.

Inspections

  1. Lath / wire inspection when re-lathing
  2. Final inspection
Full St. Paul permit guide for stucco repair

Local conditions that change this job

Only the exposures that materially affect stucco repair.

Humidity

Severe84/100

Annual rainfall

High74/100

Coastal / salt-air exposure

Moderate45/100

Nearby market comparison

MarketLocal factorMedianPer sq ft repaired
St. Paul (this page)x1.083$4,500$7.50$24
Minneapolisx1.152$4,800$8$25.50
Brooklyn Parkx1.061$4,500$7.50$23.50
Bloomingtonx1.061$4,500$7.50$23.50

What St. Paul homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in St. Paul

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates St. Paul stucco costs

Hometriva does not publish invented city prices. The St. Paul estimate for stucco repair is produced by this chain, and every input is stored separately:

  1. National baseline$4,200

    Typical U.S. cost for stucco repair on a single-family home.

  2. Local labor factorx1.091

    St. Paul-area trade labor rates, weighted at 55% of this job.

  3. Material factorx1.055

    Material and delivery pricing into Ramsey County, weighted at 45%.

  4. Regulatory factorx1.036

    Local code, product-approval and inspection load, applied at 20% for this project type.

  5. Applied multiplierx1.083

    Blended St. Paul adjustment specific to stucco repair.

  6. Permit component$90 – $315

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, stucco repair in St. Paul carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for stucco repair pricing in St. Paul, MN.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

How long does stucco repair take?

2-6 days of work plus cure time, 1-4 weeks with permitting. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are extent of delamination behind the visible crack; whether lath and weather barrier need replacement; two-story access and scaffolding.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages