Tile Installation cost in Denver, CO
Denver, CO · updated August 2026
$6,300
Typical local cost
$2,000 – $18,000
Typical range
- per sq ft installed
- $8 – $28
- Permit
- Usually no
- Typical timeline
- 3-7 days including cure time
Installed, local pricing
$0 – $175 in fees
3-7 days including cure time
Denver runs +13% against the U.S. average · data confidence High · modeled estimate, not a quote
Most Denver homeowners pay around $6,300. The local adjustment for this trade is x1.126 — driven mainly by Denver County labor rates and 5% exposure to local code requirements.
Estimate your Denver job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Tiles needed
57 tiles
Includes 12% waste
- Boxes to buy
- 8 boxes
- Thinset (50 lb bags)
- 2 bags
- Grout (25 lb bags)
- 1 bags
- Tile cost estimateMaterial only
- $302 – $1,089
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 200 sq ft installed | $1,600 – $5,600 |
| 275 sq ft installed | $2,200 – $7,700 |
| 350 sq ft installed | $2,800 – $9,800 |
| 450 sq ft installed | $3,600 – $12,600 |
| 600 sq ft installed | $4,800 – $16,800 |
Based on Denver pricing of $8–$28 per sq ft installed.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Porcelain Tile | $5,700 – $9,500 | 40–75 yrs | Low |
Where the money goes
- Labor
- $3,900
- 61% of median
- Materials
- $2,400
- 38% of median
- Permit & fees
- $90
- 1% of median
Denver project costs+13% vs U.S. average
Based on Denver County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-7 days including cure time
05
Closeout
Final sign-off, warranty and documentation
Denver labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$59–$76
Interior crews in Denver County · +16% vs U.S. ($58/hr)
Typical crew
2 × 3.5 days
On-site time for a typical tile job here.
Labor in the price
$3,900
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Denver wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Denver County labor factor (x1.156). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Denver differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$550
Denver County crews price 16% above the national average, and labor is 62% of this job.
Material and delivery+$150
Materials are nationally traded, so they move less — but delivery into this market runs 7% over baseline.
Basis: Decomposition of the modeled Denver median against the U.S. median for this scope. · City of Denver building department, Hometriva methodology
Denver vs Colorado vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tile installation in Denver
$6,390
Likely range $2,090 – $18,090
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tile size and format — large format costs more to set
- Layout pattern and diagonal cuts
- Shower waterproofing membrane
- Substrate preparation and leveling
- Natural stone sealing
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Denver building departmentModeled estimate |
| electrical | City of Denver building departmentModeled estimate |
| mechanical | City of Denver building departmentModeled estimate |
| plumbing | City of Denver building departmentModeled estimate |
| zoning | City of Denver building departmentModeled estimate |
| fire | City of Denver building departmentModeled estimate |
Permit requirement in Denver
Usually no permit is required in Denver, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Denver building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$175Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tile installation.
Humidity
Low26/100
Front Range hail is the single largest driver of roof replacement volume, and Denver runs its own combined city-county permitting authority.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Denver (this page) | x1.126 | $6,300 | $8 – $28 |
| Colorado Springs | x1.023 | $5,700 | $7 – $25.50 |
| Salt Lake City | x1.043 | $5,800 | $7.50 – $26 |
| Albuquerque | x0.930 | $5,200 | $6.50 – $23.50 |
What Denver homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Denver
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Denver tile costs
Hometriva does not publish invented city prices. The Denver estimate for tile installation is produced by this chain, and every input is stored separately:
- National baseline$5,600
Typical U.S. cost for tile installation on a single-family home.
- Local labor factorx1.156
Denver-area trade labor rates, weighted at 62% of this job.
- Material factorx1.066
Material and delivery pricing into Denver County, weighted at 38%.
- Regulatory factorx1.075
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.126
Blended Denver adjustment specific to tile installation.
- Permit component$0 – $175
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tile installation in Denver carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tile installation pricing in Denver, CO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How much extra tile should I order?
Order 10 percent extra for a straight layout and 15 to 20 percent for diagonal or herringbone patterns to cover cuts, breakage and future repairs from the same dye lot.
Sources
Sources & verification
- City of Denver building department
- Denver permit portal
- Colorado Division of Fire Prevention and Control
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.