Toilet Installation cost in Aurora, CO
Aurora, CO · updated August 2026
$600
Typical local cost
$300 – $1,200
Typical range
- per toilet installed
- $300 – $1,250
- Permit
- Usually no
- Typical timeline
- 1-3 hours of work
Installed, local pricing
$0 – $130 in fees
1-3 hours of work
Aurora runs +13% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Aurora is $600. The local adjustment for this trade is x1.132 — driven mainly by Arapahoe County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
Where the money goes
- Labor
- $400
- 60% of median
- Materials
- $200
- 30% of median
- Permit & fees
- $65
- 10% of median
Aurora project costs+13% vs U.S. average
Based on Arapahoe County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1-3 hours of work
05
Closeout
Final sign-off, warranty and documentation
Aurora labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$107–$138
Plumbing crews in Arapahoe County · +16% vs U.S. ($105/hr)
Typical crew
2 × 0.5 days
On-site time for a typical toilet job here.
Labor in the price
$400
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Aurora wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Arapahoe County labor factor (x1.156). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Aurora differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$50
Arapahoe County crews price 16% above the national average, and labor is 62% of this job.
Basis: Decomposition of the modeled Aurora median against the U.S. median for this scope. · City of Aurora Building Division, Hometriva methodology
Aurora vs Colorado vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated toilet installation in Aurora
$665
Likely range $365 – $1,265
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Fixture price, from builder-grade two-piece to wall-hung or bidet models
- Flange repair, riser or subfloor damage found after removal
- Rough-in distance and whether the drain has to move
- Haul-away of the old fixture
- Emergency or after-hours service
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Aurora Building DivisionConfirmed department |
| electrical | City of Aurora Building DivisionConfirmed department |
| mechanical | City of Aurora Building DivisionConfirmed department |
| plumbing | City of Aurora Building DivisionConfirmed department |
| zoning | City of Aurora Building DivisionConfirmed department |
| fire | City of Aurora Building DivisionConfirmed department |
Permit requirement in Aurora
A permit is usually not required for toilet installation on its own. Aurora still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Aurora Building DivisionConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0–$130.
Local conditions that change this job
Only the exposures that materially affect toilet installation.
Humidity
Severe84/100
Nearby market comparison
What Aurora homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Aurora
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Aurora toilet costs
Hometriva does not publish invented city prices. The Aurora estimate for toilet installation is produced by this chain, and every input is stored separately:
- National baseline$520
Typical U.S. cost for toilet installation on a single-family home.
- Local labor factorx1.156
Aurora-area trade labor rates, weighted at 62% of this job.
- Material factorx1.083
Material and delivery pricing into Arapahoe County, weighted at 38%.
- Regulatory factorx1.062
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.132
Blended Aurora adjustment specific to toilet installation.
- Permit component$0 – $130
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, toilet installation in Aurora carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for toilet installation pricing in Aurora, CO.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Does replacing a toilet need a permit?
A like-for-like swap is usually exempt. Moving the drain, adding a fixture or altering the vent is plumbing work that normally requires a permit and inspection.
Why is the installed price higher than the fixture price?
Labour includes removal, disposal, a new seal and supply, and levelling the fixture. Rotted flanges and damaged subfloor are the most common reasons a simple swap becomes a larger job.
How long does toilet installation take?
1-3 hours of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are fixture price, from builder-grade two-piece to wall-hung or bidet models; flange repair, riser or subfloor damage found after removal; rough-in distance and whether the drain has to move.
Sources
Sources & verification
- City of Aurora Building Division
- Colorado Division of Fire Prevention and Control
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.