Tree Removal cost in Glendale, AZ
Glendale, AZ · updated August 2026
$1,400
Typical local cost
$500 – $5,700
Typical range
- per tree
- $450 – $5,700
- Permit
- It depends
- Typical timeline
- Same day to 2 days
Installed, local pricing
$0 – $295 in fees
Same day to 2 days, 1-4 weeks if a permit is required
Glendale runs +3% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Glendale homeowners pay around $1,400. The local adjustment for this trade is x1.034 — driven mainly by Maricopa County labor rates and 20% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 1 tree | $500 – $5,700 |
| 1 tree | $500 – $5,700 |
| 1 tree | $500 – $5,700 |
| 1 tree | $500 – $5,700 |
| 1 tree | $500 – $5,700 |
Based on Glendale pricing of $450–$5,700 per tree.
Where the money goes
- Labor
- $1,200
- 77% of median
- Materials
- $200
- 13% of median
- Permit & fees
- $150
- 10% of median
Glendale project costs+3% vs U.S. average
Based on Maricopa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Glendale building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
Same day to 2 days, 1-4 weeks if a permit is required
05
Closeout
Final sign-off, warranty and documentation
Glendale labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$56–$73
Outdoor crews in Maricopa County · +3% vs U.S. ($62/hr)
Typical crew
2 × 1 day
On-site time for a typical tree removal job here.
Labor in the price
$1,200
85% of the median — the rest is material, disposal and permit.
Because labor is 85% of this job, Glendale wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the Maricopa County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Glendale differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$25
Maricopa County crews price 3% above the national average, and labor is 85% of this job.
Basis: Decomposition of the modeled Glendale median against the U.S. median for this scope. · City of Glendale building department, Hometriva methodology
Glendale vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated tree removal in Glendale
$1,550
Likely range $650 – $5,850
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tree height, species and trunk diameter
- Proximity to the house and power lines
- Crane or bucket truck access
- Stump grinding and debris haul-off
- Emergency post-storm service
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Glendale building departmentModeled estimate |
| electrical | City of Glendale building departmentModeled estimate |
| mechanical | City of Glendale building departmentModeled estimate |
| plumbing | City of Glendale building departmentModeled estimate |
| zoning | City of Glendale building departmentModeled estimate |
| fire | City of Glendale building departmentModeled estimate |
Permit requirement in Glendale
It depends on scope. Like-for-like cosmetic work in Glendale is often exempt, but a permit is required as soon as you change structure, plumbing, electrical or the building envelope.
- Permitting authority
- City of Glendale building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$295Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect tree removal.
Design wind speed exposure
High70/100
Named-storm exposure
High70/100
Glendale sits in Maricopa County, Arizona. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
What Glendale homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Glendale
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Glendale tree removal costs
Hometriva does not publish invented city prices. The Glendale estimate for tree removal is produced by this chain, and every input is stored separately:
- National baseline$1,400
Typical U.S. cost for tree removal on a single-family home.
- Local labor factorx1.026
Glendale-area trade labor rates, weighted at 85% of this job.
- Material factorx1.027
Material and delivery pricing into Maricopa County, weighted at 15%.
- Regulatory factorx1.036
Local code, product-approval and inspection load, applied at 20% for this project type.
- Applied multiplierx1.034
Blended Glendale adjustment specific to tree removal.
- Permit component$0 – $295
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, tree removal in Glendale carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for tree removal pricing in Glendale, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to remove a tree in Florida?
Florida Statute 163.045 lets a residential property owner remove a tree without a local permit when a certified arborist or licensed landscape architect documents that it poses an unacceptable risk. Otherwise, most cities require a permit for protected species above a size threshold.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.