Water Heater Replacement cost in Silver Spring, MD
Silver Spring, MD · updated August 2026
$2,500
Typical local cost
$1,400 – $6,300
Typical range
- per installed unit
- $1,400 – $6,350
- Permit
- Yes
- Typical timeline
- 2-5 hours of work
Installed, local pricing
$75 – $240 in fees
2-5 hours of work, under 2 weeks including permit and inspection
Silver Spring runs +17% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Silver Spring is $2,500. The local adjustment for this trade is x1.172 — driven mainly by Montgomery County labor rates and 55% exposure to local code requirements.
Estimate your Silver Spring job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Installed cost estimate
$1,913 – $2,813
- 10-year cost of ownershipPurchase plus energy
- $8,345
- Permit + code upgrades
- $551
Priced for Silver Spring (local adjustment x1.172).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 40-gallon tank | $1,100 – $5,000 |
| 50-gallon tank | $1,400 – $6,300 |
| 75–80-gallon tank | $1,900 – $8,500 |
| Tankless (gas) | $2,200 – $10,100 |
| Heat-pump (hybrid) | $2,700 – $12,000 |
Based on Silver Spring pricing of $1,400–$6,350 per installed unit.
Cost by water heater scenario
Fuel type and whether the install changes venting, gas or electrical service set the price. Every row is priced against the Silver Spring median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Tank swap, same fuel and size | Existing connections and venting reused | $1,500 – $2,100 |
| Larger tank or relocation | New connections, pan and drain | $2,300 – $3,000 |
| Gas tankless conversion | New gas line sizing and dedicated venting | $3,800 – $5,500 |
| Heat pump water heater | Electrical circuit, condensate drain, clearance space | $3,500 – $5,000 |
| Code-required upgrades on replacement | Expansion tank, seismic or pan requirements | $1,900 – $2,800 |
- • Tankless conversion is a gas and venting project as much as a plumbing one, which is where the cost gap comes from.
- • Expansion tanks, drain pans and shutoff valves are frequently required at replacement even when the old install lacked them.
Basis: Each scope is priced as a multiple of the modeled Silver Spring median for water heater replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Tankless Water Heater | $3,800 – $6,300 | 18–25 yrs | Moderate |
| Tank Water Heater | $1,900 – $3,300 | 8–12 yrs | Low |
Where the money goes
- Labor
- $1,600
- 58% of median
- Materials
- $1,000
- 36% of median
- Permit & fees
- $160
- 6% of median
Silver Spring project costs+17% vs U.S. average
Based on Montgomery County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Silver Spring building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 hours of work, under 2 weeks including permit and inspection
05
Inspection
Plumbing / final inspection, Electrical or gas inspection where applicable
06
Closeout
Final sign-off, warranty and documentation
Silver Spring labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$107–$138
Plumbing crews in Montgomery County · +16% vs U.S. ($105/hr)
Typical crew
2 × 1 day
On-site time for a typical water heater job here.
Labor in the price
$1,600
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Silver Spring wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Montgomery County labor factor (x1.156). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Silver Spring differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$200
Montgomery County crews price 16% above the national average, and labor is 62% of this job.
Code and inspection load+$75
Water Heater Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.07.
Material and delivery+$75
Materials are nationally traded, so they move less — but delivery into this market runs 8% over baseline.
Basis: Decomposition of the modeled Silver Spring median against the U.S. median for this scope. · City of Silver Spring building department, Hometriva methodology
Silver Spring vs Maryland vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated water heater replacement in Silver Spring
$2,660
Likely range $1,560 – $6,460
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tank versus tankless (tankless usually needs gas or electrical upgrades)
- Capacity in gallons and recovery rate
- Garage, attic or interior closet location
- Code upgrades: pan, drain line, expansion tank, seismic or hurricane strapping
- Removal and disposal of the old unit
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Silver Spring building departmentModeled estimate |
| electrical | City of Silver Spring building departmentModeled estimate |
| mechanical | City of Silver Spring building departmentModeled estimate |
| plumbing | City of Silver Spring building departmentModeled estimate |
| zoning | City of Silver Spring building departmentModeled estimate |
| fire | City of Silver Spring building departmentModeled estimate |
Permit requirement in Silver Spring
Yes — a permit is required for water heater replacement in Silver Spring, MD. The work must be inspected before it can be closed out, and a homeowner may be able to pull an owner-builder permit on a home they own and occupy.
- Permitting authority
- City of Silver Spring building departmentModeled estimate
- Permit fee
- Estimated allowance $75–$240Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Plumbing / final inspection
- Electrical or gas inspection where applicable
Local conditions that change this job
Only the exposures that materially affect water heater replacement.
Humidity
Severe84/100
Silver Spring sits in Montgomery County, Maryland. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per installed unit |
|---|---|---|---|
| Silver Spring (this page) | x1.172 | $2,500 | $1,400 – $6,350 |
| Washington | x1.312 | $2,800 | $1,550 – $7,100 |
| Rockville | x1.172 | $2,500 | $1,400 – $6,350 |
| Arlington | x1.087 | $2,300 | $1,300 – $5,850 |
What Silver Spring homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Silver Spring
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Silver Spring water heater costs
Hometriva does not publish invented city prices. The Silver Spring estimate for water heater replacement is produced by this chain, and every input is stored separately:
- National baseline$2,150
Typical U.S. cost for water heater replacement on a single-family home.
- Local labor factorx1.156
Silver Spring-area trade labor rates, weighted at 62% of this job.
- Material factorx1.083
Material and delivery pricing into Montgomery County, weighted at 38%.
- Regulatory factorx1.071
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.172
Blended Silver Spring adjustment specific to water heater replacement.
- Permit component$75 – $240
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, water heater replacement in Silver Spring carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for water heater replacement pricing in Silver Spring, MD.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Can I replace my own water heater?
A homeowner can pull an owner-builder permit and replace a water heater in a home they own and occupy. Electrical and gas connections must still pass inspection.
Do I need a permit for water heater replacement in Silver Spring, MD?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does water heater replacement take?
2-5 hours of work, under 2 weeks including permit and inspection. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are tank versus tankless (tankless usually needs gas or electrical upgrades); capacity in gallons and recovery rate; garage, attic or interior closet location.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.