Water Heater Replacement cost in Arlington, TX
Arlington, TX · updated August 2026
$2,200
Typical local cost
$1,200 – $5,500
Typical range
- per installed unit
- $1,250 – $5,500
- Permit
- Yes
- Typical timeline
- 2-5 hours of work
Installed, local pricing
$70 – $225 in fees
2-5 hours of work, under 2 weeks including permit and inspection
Arlington runs +2% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for Arlington is $2,200. The local adjustment for this trade is x1.022 — driven mainly by Tarrant County labor rates and 55% exposure to local code requirements.
Estimate your Arlington job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Installed cost estimate
$1,668 – $2,453
- 10-year cost of ownershipPurchase plus energy
- $7,277
- Permit + code upgrades
- $480
Priced for Arlington (local adjustment x1.022).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 40-gallon tank | $1,000 – $4,400 |
| 50-gallon tank | $1,200 – $5,500 |
| 75–80-gallon tank | $1,600 – $7,400 |
| Tankless (gas) | $1,900 – $8,800 |
| Heat-pump (hybrid) | $2,300 – $10,500 |
Based on Arlington pricing of $1,250–$5,500 per installed unit.
Cost by water heater scenario
Fuel type and whether the install changes venting, gas or electrical service set the price. Every row is priced against the Arlington median.
| Scope | What it includes | Typical installed cost |
|---|---|---|
| Tank swap, same fuel and size | Existing connections and venting reused | $1,300 – $1,900 |
| Larger tank or relocation | New connections, pan and drain | $2,000 – $2,600 |
| Gas tankless conversion | New gas line sizing and dedicated venting | $3,300 – $4,800 |
| Heat pump water heater | Electrical circuit, condensate drain, clearance space | $3,100 – $4,400 |
| Code-required upgrades on replacement | Expansion tank, seismic or pan requirements | $1,700 – $2,400 |
- • Tankless conversion is a gas and venting project as much as a plumbing one, which is where the cost gap comes from.
- • Expansion tanks, drain pans and shutoff valves are frequently required at replacement even when the old install lacked them.
Basis: Each scope is priced as a multiple of the modeled Arlington median for water heater replacement, so the scenarios, the size table and the calculator always agree. · Hometriva methodology
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Tankless Water Heater | $3,300 – $5,500 | 18–25 yrs | Moderate |
| Tank Water Heater | $1,700 – $2,900 | 8–12 yrs | Low |
Where the money goes
- Labor
- $1,400
- 60% of median
- Materials
- $800
- 34% of median
- Permit & fees
- $150
- 6% of median
Arlington project costs+2% vs U.S. average
Based on Tarrant County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Arlington Planning & Development Services
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 hours of work, under 2 weeks including permit and inspection
05
Inspection
Plumbing / final inspection, Electrical or gas inspection where applicable
06
Closeout
Final sign-off, warranty and documentation
Arlington labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$91–$118
Plumbing crews in Tarrant County · -1% vs U.S. ($105/hr)
Typical crew
2 × 1 day
On-site time for a typical water heater job here.
Labor in the price
$1,400
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Arlington wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Tarrant County labor factor (x0.987). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Arlington differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$50
Water Heater Replacement carries 55% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Basis: Decomposition of the modeled Arlington median against the U.S. median for this scope. · City of Arlington Planning & Development Services, Hometriva methodology
Arlington vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated water heater replacement in Arlington
$2,350
Likely range $1,350 – $5,650
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Tank versus tankless (tankless usually needs gas or electrical upgrades)
- Capacity in gallons and recovery rate
- Garage, attic or interior closet location
- Code upgrades: pan, drain line, expansion tank, seismic or hurricane strapping
- Removal and disposal of the old unit
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Arlington Planning & Development ServicesConfirmed department |
| electrical | City of Arlington Planning & Development ServicesConfirmed department |
| mechanical | City of Arlington Planning & Development ServicesConfirmed department |
| plumbing | City of Arlington Planning & Development ServicesConfirmed department |
| zoning | City of Arlington Planning & Development ServicesConfirmed department |
| fire | City of Arlington Planning & Development ServicesConfirmed department |
Permit requirement in Arlington
Yes — a permit is required for water heater replacement in Arlington, TX. The work must be inspected before it can be closed out, and a homeowner may be able to pull an owner-builder permit on a home they own and occupy.
- Permitting authority
- City of Arlington Planning & Development ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $70–$225.
Inspections
- Plumbing / final inspection
- Electrical or gas inspection where applicable
Local conditions that change this job
Only the exposures that materially affect water heater replacement.
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per installed unit |
|---|---|---|---|
| Arlington (this page) | x1.022 | $2,200 | $1,250 – $5,500 |
| Grand Prairie | x0.995 | $2,100 | $1,200 – $5,350 |
| Fort Worth | x0.984 | $2,100 | $1,200 – $5,300 |
| Irving | x0.995 | $2,100 | $1,200 – $5,350 |
+ Had water heater replacement done in Arlington? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Arlington water heater costs
Hometriva does not publish invented city prices. The Arlington estimate for water heater replacement is produced by this chain, and every input is stored separately:
- National baseline$2,150
Typical U.S. cost for water heater replacement on a single-family home.
- Local labor factorx0.987
Arlington-area trade labor rates, weighted at 62% of this job.
- Material factorx1.010
Material and delivery pricing into Tarrant County, weighted at 38%.
- Regulatory factorx1.048
Local code, product-approval and inspection load, applied at 55% for this project type.
- Applied multiplierx1.022
Blended Arlington adjustment specific to water heater replacement.
- Permit component$70 – $225
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, water heater replacement in Arlington carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for water heater replacement pricing in Arlington, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Can I replace my own water heater?
A homeowner can pull an owner-builder permit and replace a water heater in a home they own and occupy. Electrical and gas connections must still pass inspection.
Do I need a permit for water heater replacement in Arlington, TX?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does water heater replacement take?
2-5 hours of work, under 2 weeks including permit and inspection. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are tank versus tankless (tankless usually needs gas or electrical upgrades); capacity in gallons and recovery rate; garage, attic or interior closet location.
Sources
Sources & verification
- City of Arlington Planning & Development Services
- Texas Department of Licensing and Regulation
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.