Well Installation cost in Minneapolis, MN
Minneapolis, MN · updated August 2026
$13,200
Typical local cost
$6,600 – $30,000
Typical range
- per foot of depth
- $30 – $78
- Permit
- Yes
- Typical timeline
- 2-5 days of drilling
Installed, local pricing
$225 – $895 in fees
2-5 days of drilling, 3-8 weeks including permitting
Minneapolis runs +20% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Minneapolis homeowners pay around $13,200. The local adjustment for this trade is x1.198 — driven mainly by Hennepin County labor rates and 70% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 150 foot of depth | $4,500 – $11,700 |
| 200 foot of depth | $6,000 – $15,600 |
| 250 foot of depth | $7,500 – $19,500 |
| 325 foot of depth | $9,800 – $25,400 |
| 425 foot of depth | $12,800 – $33,200 |
Based on Minneapolis pricing of $30–$78 per foot of depth.
Where the money goes
- Labor
- $8,200
- 60% of median
- Materials
- $5,000
- 36% of median
- Permit & fees
- $560
- 4% of median
Minneapolis project costs+20% vs U.S. average
Based on Hennepin County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of Minneapolis building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-5 days of drilling, 3-8 weeks including permitting
05
Inspection
Well completion inspection, Water quality test, Final plumbing inspection
06
Closeout
Final sign-off, warranty and documentation
Minneapolis labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$109–$141
Plumbing crews in Hennepin County · +18% vs U.S. ($105/hr)
Typical crew
3 × 3 days
On-site time for a typical well job here.
Labor in the price
$8,200
62% of the median — the rest is material, disposal and permit.
Because labor is 62% of this job, Minneapolis wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national plumbing crew rates adjusted by the Hennepin County labor factor (x1.182). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Minneapolis differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$1,250
Hennepin County crews price 18% above the national average, and labor is 62% of this job.
Code and inspection load+$525
Well Installation carries 70% exposure to local code requirements, and this jurisdiction's review load indexes at x1.07.
Material and delivery+$350
Materials are nationally traded, so they move less — but delivery into this market runs 8% over baseline.
Permit fees+$50
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Minneapolis median against the U.S. median for this scope. · City of Minneapolis building department, Hometriva methodology
Minneapolis vs Minnesota vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated well installation in Minneapolis
$13,760
Likely range $7,160 – $30,560
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Depth to a reliable aquifer in your area
- Casing diameter and material
- Submersible pump horsepower and pressure tank
- Water treatment for sulfur or iron
- Electrical service to the wellhead
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Minneapolis building departmentModeled estimate |
| electrical | City of Minneapolis building departmentModeled estimate |
| mechanical | City of Minneapolis building departmentModeled estimate |
| plumbing | City of Minneapolis building departmentModeled estimate |
| zoning | City of Minneapolis building departmentModeled estimate |
| fire | City of Minneapolis building departmentModeled estimate |
Permit requirement in Minneapolis
Yes — a permit is required for well installation in Minneapolis, MN. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
- Permitting authority
- City of Minneapolis building departmentModeled estimate
- Permit fee
- Estimated allowance $225–$895Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Well completion inspection
- Water quality test
- Final plumbing inspection
Local conditions that change this job
Only the exposures that materially affect well installation.
Flood zone exposure
Low34/100
Annual rainfall
Moderate54/100
Design snow load, ice-dam prevention and deep frost footings change roofing, insulation and deck specifications versus southern markets.
Nearby market comparison
| Market | Local factor | Median | Per foot of depth |
|---|---|---|---|
| Minneapolis (this page) | x1.198 | $13,200 | $30 – $78 |
| Milwaukee | x1.130 | $12,400 | $28 – $73.50 |
| Des Moines | x0.979 | $10,800 | $24.50 – $63.50 |
| Chicago | x1.318 | $14,500 | $33 – $85.50 |
What Minneapolis homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Minneapolis
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Minneapolis well costs
Hometriva does not publish invented city prices. The Minneapolis estimate for well installation is produced by this chain, and every input is stored separately:
- National baseline$11,000
Typical U.S. cost for well installation on a single-family home.
- Local labor factorx1.182
Minneapolis-area trade labor rates, weighted at 62% of this job.
- Material factorx1.081
Material and delivery pricing into Hennepin County, weighted at 38%.
- Regulatory factorx1.068
Local code, product-approval and inspection load, applied at 70% for this project type.
- Applied multiplierx1.198
Blended Minneapolis adjustment specific to well installation.
- Permit component$225 – $895
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, well installation in Minneapolis carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for well installation pricing in Minneapolis, MN.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Who issues well permits in Florida?
Florida's five water management districts issue water well construction permits, often delegated to a county health department. The local building department only handles the electrical and plumbing connection.
Sources
Sources & verification
- City of Minneapolis building department
- Minneapolis permit portal
- Minnesota Department of Labor and Industry
- BLS Occupational Employment and Wage Statistics
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.