Missouri · HVAC
Furnace Replacement cost in Missouri
Statewide pricing, permit posture and inspection sequence for furnace replacement in Missouri. Your city or county issues the actual permit — use the local links below to confirm fees.
Model reviewed August 2026
Furnace Replacement cost in Missouri
$2,900 – $10,600
Most Missouri homeowners pay around $5,600, or $50–$100 per 1,000 btu of output. Permit fees typically add $50–$300.
Permit: Yes. Code adoption is local — local adoption of the irc; no statewide residential code.
Cost breakdown
| Budget scope | $2,900 |
|---|---|
| Typical project | $5,600 |
| Premium / complex | $10,600 |
| per 1,000 BTU of output | $50 – $100 |
| Permit fees | $50 – $300 |
| vs national baseline | -8% |
| Timeline | 1 day of work, 1-3 weeks including permitting and inspection |
What is different about furnace replacement in Missouri
Permitting varies more within Missouri than between many states — St. Louis County municipalities can require full review while nearby unincorporated areas require little.
Owner-builder: Homeowner permits widely allowed. Furnace Replacement generally requires a licensed contractor to pull the permit, even where owner-builder status is available.
Inspections
- Gas line / combustion inspection
- Final mechanical inspection
What drives the price
- Input rating in BTU and the efficiency tier selected
- Condensing (90%+) furnaces requiring new PVC venting and a condensate drain
- Gas line resizing or a new sediment trap and shutoff
- Plenum, duct transition and filter cabinet modifications
- Access in a tight closet, crawlspace or attic
Furnace pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Kansas City | 60/100 · Complex | 5–19 days | 3 |
| St. Louis | 60/100 · Complex | 5–19 days | 3 |
| Springfield | 69/100 · Complex | 6–22 days | 3 |
| Columbia | 69/100 · Complex | 6–22 days | 3 |
| Independence | 69/100 · Complex | 6–22 days | 3 |
| Lee's Summit | 69/100 · Complex | 6–22 days | 3 |
| O'Fallon | 69/100 · Complex | 6–22 days | 3 |
| St. Joseph | 69/100 · Complex | 6–22 days | 3 |
What Missouri homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in Missouri
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy Rebates- DSIRE — every Missouri incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — Missouri statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
Does a furnace changeout need an inspection?
Yes in most jurisdictions. Combustion appliances are inspected for venting, combustion air and gas connections, and the permit is typically not closed until that inspection passes.
Is a high-efficiency furnace worth the extra cost?
It depends on how many heating hours the climate produces and the local fuel price. In cold climates the fuel saving usually repays the difference; in mild climates it often does not.
Do I need a permit for furnace replacement in Missouri?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does furnace replacement take?
1 day of work, 1-3 weeks including permitting and inspection. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are input rating in btu and the efficiency tier selected; condensing (90%+) furnaces requiring new pvc venting and a condensate drain; gas line resizing or a new sediment trap and shutoff.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.