Utah · Restoration
Mold Remediation cost in Utah
Statewide pricing, permit posture and inspection sequence for mold remediation in Utah. Your city or county issues the actual permit — use the local links below to confirm fees.
Model reviewed August 2026
Mold Remediation cost in Utah
$1,500 – $14,600
Most Utah homeowners pay around $4,400, or $11.50–$34 per sq ft of affected area. Permit fees typically add $0–$270.
Permit: It depends. Utah State Construction Code, based on the IRC
Cost breakdown
| Budget scope | $1,500 |
|---|---|
| Typical project | $4,400 |
| Premium / complex | $14,600 |
| per sq ft of affected area | $11.50 – $34 |
| Permit fees | $0 – $270 |
| vs national baseline | -3% |
| Timeline | 3-10 days of work |
What is different about mold remediation in Utah
A single statewide code with limited local amendment keeps requirements predictable; seismic detailing along the Wasatch Front is the main added scope.
Owner-builder: Homeowner permits allowed on owner-occupied property. Mold Remediation generally requires a licensed contractor to pull the permit, even where owner-builder status is available.
Inspections
- Post-remediation verification testing
- Building inspection if structural repairs follow
What drives the price
- Affected square footage and number of rooms
- HVAC system contamination
- Containment and negative air equipment
- Demolition and reconstruction of affected assemblies
- Independent clearance testing
Mold pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Salt Lake City | 32/100 · Simple | 3–10 days | 2 |
| West Valley City | 45/100 · Moderate | 4–14 days | 2 |
| Provo | 45/100 · Moderate | 4–14 days | 2 |
| West Jordan | 45/100 · Moderate | 4–14 days | 2 |
| Orem | 45/100 · Moderate | 4–14 days | 2 |
| Sandy | 45/100 · Moderate | 4–14 days | 2 |
| St. George | 45/100 · Moderate | 4–14 days | 2 |
| Ogden | 45/100 · Moderate | 4–14 days | 2 |
| Lehi | 45/100 · Moderate | 4–14 days | 2 |
What Utah homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in Utah
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy Rebates- DSIRE — every Utah incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — Utah statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
How long does mold remediation take?
3-10 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are affected square footage and number of rooms; hvac system contamination; containment and negative air equipment.
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.