District of Columbia · Electrical
Electrical Panel Replacement cost in District of Columbia
Statewide pricing, permit posture and inspection sequence for electrical panel replacement in District of Columbia. Your city or county issues the actual permit — use the local links below to confirm fees.
Verified August 2026
Electrical Panel Replacement cost in District of Columbia
$2,500 – $9,100
Most District of Columbia homeowners pay around $4,500, or $2,550–$9,050 per panel upgrade. Permit fees typically add $120–$465.
Permit: Yes. DC Construction Codes, based on the IRC with District amendments
Cost breakdown
| Budget scope | $2,500 |
|---|---|
| Typical project | $4,500 |
| Premium / complex | $9,100 |
| per panel upgrade | $2,550 – $9,050 |
| Permit fees | $120 – $465 |
| vs national baseline | +33% |
| Timeline | 1 day of work, 1-4 weeks including utility coordination |
What is different about electrical panel replacement in District of Columbia
A single citywide permitting authority reviews every project, and historic-district review covers a large share of the rowhouse stock — exterior work often needs design approval before a building permit is issued.
Owner-builder: Homeowner permits allowed on owner-occupied property; licensed trades required for electrical, plumbing and gas. Electrical Panel Replacement generally requires a licensed contractor to pull the permit, even where owner-builder status is available.
Inspections
- Utility disconnect coordination
- Rough electrical
- Final electrical inspection
What drives the price
- Service size: 100A, 150A or 200A
- Meter can and service entrance conductor replacement
- Overhead versus underground service
- Surge protection and AFCI/GFCI breaker requirements
- Utility disconnect and reconnect scheduling
Panel pricing by city
Permit difficulty by city
Hometriva Permit Complexity Index: review load, added discipline reviews, wind and flood overlays, and how each jurisdiction sets fees.
| City | Complexity | Review time | Inspections |
|---|---|---|---|
| Washington | 58/100 · Complex | 5–18 days | 3 |
What District of Columbia homeowners reported paying
Invoice amounts submitted for this state, shown beside the model.
Rebates and incentives in District of Columbia
What is still claimable, what expired, and where to check your own utility territory.
Federally funded, state-administered rebates for heat pumps, panel and wiring upgrades, insulation and whole-home retrofits. Availability, income tiers and funding depend entirely on the state program and can pause when a state's allocation runs out.
U.S. DOE — Home Energy Rebates- DSIRE — every District of Columbia incentive by ZIPThe N.C. Clean Energy Technology Center database. The authoritative list of state, utility and local programs.
- ENERGY STAR rebate finderUtility and manufacturer rebates by ZIP code for HVAC, water heating and appliances.
- DOE Home Energy Rebates — District of Columbia statusShows whether the state's HEAR/HOMES program is open, waitlisted or not yet launched.
Frequently asked questions
Do I need a permit to replace an electrical panel?
Yes, always. An electrical permit is required, a licensed electrical contractor must perform the work in most Florida jurisdictions, and the utility will not reconnect service until the final inspection passes.
How long does a panel upgrade take?
The physical work is usually one day with power off for 4-8 hours. Utility disconnect scheduling and inspection generally stretch the total to one to four weeks.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.