St. Petersburg, FL · Pinellas County
Electrical Panel Replacement in St. Petersburg, FL: Cost & Permits
What electrical panel replacement actually costs in St. Petersburg, whether you need a permit, which inspections apply, and how long the job takes.
Verified August 2026
Typical local cost
$3,500
$2,000 – $7,000
per panel upgrade
$1,950 – $7,000
Permit fee
$105 – $400
Pinellas County estimate
vs national
+3%
local labor & materials
Do you need a permit for electrical panel replacement in St. Petersburg, FL?
Yes
Yes — a permit is required for electrical panel replacement in St. Petersburg, FL. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
Large parts of Pinellas County sit in FEMA flood zones, which triggers substantial-improvement review on bigger remodels.
Cost breakdown in St. Petersburg
| Low endSimple scope, competitive bid | $2,000 |
|---|---|
| TypicalMost homeowners land here | $3,500 |
| High endComplex access, premium materials | $7,000 |
| per panel upgrade | $1,950 – $7,000 |
| Permit fee estimate | $105 – $400 |
| Timeline | 1 day of work, 1-4 weeks including utility coordination |
Math: national baseline $1,900–$6,800 × St. Petersburg cost index 1.03. Permit fees use a 1.05 local multiplier. Estimates, not quotes.
What drives your price here
- Service size: 100A, 150A or 200A
- Meter can and service entrance conductor replacement
- Overhead versus underground service
- Surge protection and AFCI/GFCI breaker requirements
- Utility disconnect and reconnect scheduling
Permit process and inspections
| Permit required | Yes |
|---|---|
| Who pulls it | Licensed contractor |
| Inspections | Utility disconnect coordination, Rough electrical, Final electrical inspection |
| Documents | Electrical permit application, Licensed electrician information, Load calculation, Panel schedule |
| Apply | St. Petersburg permit portal |
Frequently asked questions
Do I need a permit to replace an electrical panel?
Yes, always. An electrical permit is required, a licensed electrical contractor must perform the work in most Florida jurisdictions, and the utility will not reconnect service until the final inspection passes.
How long does a panel upgrade take?
The physical work is usually one day with power off for 4-8 hours. Utility disconnect scheduling and inspection generally stretch the total to one to four weeks.
Panel costs in nearby cities
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.
Page data quality: 89/100
- ✓ Verified permit status
- ✓ Official source linked
- ✓ Local cost range
- ✓ Inspection detail
- ✓ Unique local rule
- ✓ Local fee estimate
- ✓ Useful FAQ
- — Relevant calculator
- ✓ Internal links