Biloxi, MS · Harrison County
Well Installation in Biloxi, MS: Cost & Permits
What well installation actually costs in Biloxi, whether you need a permit, which inspections apply, and how long the job takes.
Model reviewed August 2026
Typical local cost
$8,900
$4,400 – $20,100
per foot of depth
$20 – $52.50
Permit fee
$150 – $600
Modeled allowance
vs national
-19%
local labor & materials
Looking for pricing detail? The full well installation cost breakdown for Biloxi covers cost by size and material, the local cost model and nearby markets.
Do you need a permit for well installation in Biloxi, MS?
Yes
Yes — a permit is required for well installation in Biloxi, MS. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
Biloxi sits in Harrison County, Mississippi. Hurricane wind design, wind-borne debris protection and floodplain review add product-approval and inspection steps to most exterior work. Work outside city limits is permitted by the county building department rather than the city.
Cost breakdown in Biloxi
| Low endSimple scope, competitive bid | $4,400 |
|---|---|
| TypicalMost homeowners land here | $8,900 |
| High endComplex access, premium materials | $20,100 |
| per foot of depth | $20 – $52.50 |
| Permit fee | Estimated allowance $150–$600Modeled from comparable fee schedules — not an official quoted fee. |
| Permit authority | City of Biloxi building departmentModeled estimate |
| Timeline | 2-5 days of drilling, 3-8 weeks including permitting |
Math: national median $11,000 × 0.809 = $8,900 in Biloxi — -19% versus the national model. The multiplier blends local labor and material costs with this project's labor share, so it is not the same as the city's overall cost index (0.82). Permit fees use a 0.75 local multiplier. Estimates, not quotes.
What drives your price here
- Depth to a reliable aquifer in your area
- Casing diameter and material
- Submersible pump horsepower and pressure tank
- Water treatment for sulfur or iron
- Electrical service to the wellhead
Permit process and inspections
| Permit required | Yes |
|---|---|
| Who pulls it | Licensed contractor |
| Inspections | Well completion inspection, Water quality test, Final plumbing inspection |
| Documents | Water well construction permit from the water management district, Licensed water well contractor number, Well completion report, Bacteriological water sample results |
| Apply | Biloxi building department (no verified online portal on file) |
Frequently asked questions
Do I need a permit for well installation in Biloxi, Mississippi?
In most jurisdictions this work is permitted and inspected. Requirements are set locally, so confirm the current application and inspection checklist with your building department before work starts.
How long does well installation take?
2-5 days of drilling, 3-8 weeks including permitting. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are depth to a reliable aquifer in your area; casing diameter and material; submersible pump horsepower and pressure tank.
Well costs in nearby cities
Sources
Sources & verification
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.