Irving, TX · Dallas County
AC Replacement in Irving, TX: Cost & Permits
What ac replacement actually costs in Irving, whether you need a permit, which inspections apply, and how long the job takes.
Verified August 2026
Typical local cost
$8,900
$5,200 – $15,500
per ton of cooling capacity
$1,600 – $3,200
Permit fee
$90 – $315
Modeled allowance
vs national
0%
local labor & materials
Looking for pricing detail? The full ac replacement cost breakdown for Irving covers cost by size and material, the local cost model and nearby markets.
Do you need a permit for ac replacement in Irving, TX?
Yes
Yes — a permit is required for ac replacement in Irving, TX. The work must be inspected before it can be closed out, and a licensed contractor generally has to pull the permit.
Irving sits in Dallas County, Texas. Hail and high straight-line winds are the dominant loss driver, so impact-rated roofing and insurance-funded replacement shape local pricing. Work outside city limits is permitted by the county building department rather than the city.
Cost breakdown in Irving
| Low endSimple scope, competitive bid | $5,200 |
|---|---|
| TypicalMost homeowners land here | $8,900 |
| High endComplex access, premium materials | $15,500 |
| per ton of cooling capacity | $1,600 – $3,200 |
| Permit fee | Estimated allowance $90–$315Modeled from comparable fee schedules — not an official quoted fee. |
| Permit authority | City of Irving building departmentModeled estimate |
| Timeline | 1 day of work, 1-3 weeks including permit and inspection |
Math: national baseline $5,200–$15,500 × Irving cost index 0.97. Permit fees use a 0.98 local multiplier. Estimates, not quotes.
What drives your price here
- System size in tons and SEER2 efficiency rating
- Heat pump versus straight cool with electric heat
- Air handler location (attic, closet, garage)
- Duct condition and any required duct replacement
- Electrical upgrades and new disconnect
Permit process and inspections
| Permit required | Yes |
|---|---|
| Who pulls it | Licensed contractor |
| Inspections | Mechanical rough / equipment set, Electrical disconnect, Final mechanical inspection |
| Documents | Mechanical permit application, HVAC contractor license and insurance, Equipment model numbers and AHRI certificate, Manual J or equivalent load documentation in some jurisdictions |
| Apply | Irving building department (no verified online portal on file) |
Frequently asked questions
Do I need a permit to replace an AC unit?
Yes. A mechanical permit is required for a residential air conditioner changeout in every Florida jurisdiction, and the work must be inspected. Licensed HVAC contractors pull this permit as part of the job.
What size AC do I need in Florida?
A rough Florida rule of thumb is one ton of cooling per 500-600 square feet of conditioned space, but proper sizing uses a Manual J load calculation that accounts for insulation, window area, orientation and ceiling height. Oversized systems short-cycle and fail to remove humidity.
How long does an AC last in Florida?
Because systems run nearly year-round and coastal salt air accelerates corrosion, Florida air conditioners typically last 10-15 years versus 15-20 in cooler climates.
AC costs in nearby cities
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.
Page data quality: 89/100
- ✓ Verified permit status
- — Official source linked
- ✓ Local cost range
- ✓ Inspection detail
- ✓ Unique local rule
- ✓ Local fee estimate
- ✓ Useful FAQ
- ✓ Relevant calculator
- ✓ Internal links