Tennessee pricing
Entry Door Replacement Cost Calculator — Tennessee
Price a front door replacement by material, frame work and hardware. Every figure below is already adjusted for Tennessee labor and material pricing.
Model reviewed August 2026
Does entry door cost cost more in Tennessee?
-10% versus the national baseline
Installed prices in Tennessee run about 10% below the national baseline. Permit fees are about 15% lower than the national average. Homeowner permits allowed on owner-occupied property.
Counties may exempt themselves from the state residential code, so the same project can be fully inspected in Nashville and effectively unpermitted one county over.
Compare with the national average entry door cost calculator.
Estimated total cost
$2,614 – $3,713
- Cost per door
- $2,614 – $3,713
- Door and sidelights
- $1,890
- Labor
- $450
Estimates only. Local pricing, site conditions and code requirements change the real number.
What changes the number in Tennessee
| Local cost indexBelow the national baseline | 0.90x national |
|---|---|
| Permit fee index | 0.85x national |
| Code basisStatewide code applies | Tennessee Residential Code, based on the IRC |
| Owner-builder posture | Homeowner permits allowed on owner-occupied property |
| Largest markets | Nashville, Memphis, Knoxville, Chattanooga |
The formula
Cost = doors x (material cost + sidelights) + frame work + hardware + labor
Slab-only swaps are cheapest. Replacing the jamb, threshold and weatherstripping (a pre-hung unit) costs more but fixes air leaks and sticking doors.
Covered markets in Tennessee
City-level cost and permit pages with local building department links.
Frequently asked questions
How much does it cost to replace a front door?
Typical installed cost is $1,200 to $4,000 in 2026 depending on material and whether sidelights are included.
Do I need a permit to replace an entry door?
A like-for-like swap usually does not need a permit, but enlarging the opening or replacing an exterior door in a coastal wind zone typically does.
Sources
Sources & verification
- Tennessee State Fire Marshal's Office
- DASMA garage door and operator standards
- International Residential Code — doors and egress (R311)
- International Code Council (IRC/IBC)
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.