Kitchen Cabinet Refacing cost in Santa Ana, CA
Santa Ana, CA · updated August 2026
$12,800
Typical local cost
$6,100 – $27,000
Typical range
- per linear foot of cabinetry
- $300 – $900
- Permit
- Usually no
- Typical timeline
- 3-5 days of work
Installed, local pricing
$0 – $220 in fees
3-5 days of work
Santa Ana runs +35% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Santa Ana homeowners pay around $12,800. The local adjustment for this trade is x1.350 — driven mainly by Orange County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 15 linear foot of cabinetry | $4,500 – $13,500 |
| 15 linear foot of cabinetry | $4,500 – $13,500 |
| 20 linear foot of cabinetry | $6,000 – $18,000 |
| 30 linear foot of cabinetry | $9,000 – $27,000 |
| 35 linear foot of cabinetry | $10,500 – $31,500 |
Based on Santa Ana pricing of $300–$900 per linear foot of cabinetry.
Where the money goes
- Labor
- $7,700
- 60% of median
- Materials
- $5,100
- 40% of median
- Permit & fees
- $110
- 1% of median
Santa Ana project costs+35% vs U.S. average
Based on Orange County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-5 days of work
05
Closeout
Final sign-off, warranty and documentation
Santa Ana labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$73–$94
Interior crews in Orange County · +43% vs U.S. ($58/hr)
Typical crew
3 × 4 days
On-site time for a typical cabinet refacing job here.
Labor in the price
$7,700
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Santa Ana wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Orange County labor factor (x1.429). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Santa Ana differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$2,450
Orange County crews price 43% above the national average, and labor is 60% of this job.
Material and delivery+$750
Materials are nationally traded, so they move less — but delivery into this market runs 20% over baseline.
Code and inspection load+$75
Kitchen Cabinet Refacing carries 5% exposure to local code requirements, and this jurisdiction's review load indexes at x1.18.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Santa Ana median against the U.S. median for this scope. · City of Santa Ana building department, Hometriva methodology
Santa Ana vs California vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen cabinet refacing in Santa Ana
$12,910
Likely range $6,210 – $27,110
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear feet of cabinetry and door count
- Veneer, thermofoil or solid wood fronts
- New soft-close hardware
- Adding crown molding or end panels
- Condition of the existing boxes
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Santa Ana building departmentModeled estimate |
| electrical | City of Santa Ana building departmentModeled estimate |
| mechanical | City of Santa Ana building departmentModeled estimate |
| plumbing | City of Santa Ana building departmentModeled estimate |
| zoning | City of Santa Ana building departmentModeled estimate |
| fire | City of Santa Ana building departmentModeled estimate |
Permit requirement in Santa Ana
Usually no permit is required in Santa Ana, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Santa Ana building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$220Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect kitchen cabinet refacing.
Humidity
Severe84/100
Santa Ana sits in Orange County, California. Seismic bracing, energy-code (Title 24) compliance and coastal exposure all factor into permit scope and material selection. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per linear foot of cabinetry |
|---|---|---|---|
| Santa Ana (this page) | x1.350 | $12,800 | $300 – $900 |
| San Francisco | x1.392 | $13,200 | $300 – $900 |
| Long Beach | x1.371 | $13,000 | $300 – $900 |
| Oakland | x1.371 | $13,000 | $300 – $900 |
What Santa Ana homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Santa Ana
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Santa Ana cabinet refacing costs
Hometriva does not publish invented city prices. The Santa Ana estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for kitchen cabinet refacing on a single-family home.
- Local labor factorx1.429
Santa Ana-area trade labor rates, weighted at 60% of this job.
- Material factorx1.200
Material and delivery pricing into Orange County, weighted at 40%.
- Regulatory factorx1.182
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.350
Blended Santa Ana adjustment specific to kitchen cabinet refacing.
- Permit component$0 – $220
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Santa Ana carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Santa Ana, CA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.