Kitchen Cabinet Refacing cost in Danbury, CT
Danbury, CT · updated August 2026
$11,400
Typical local cost
$5,400 – $24,000
Typical range
- per linear foot of cabinetry
- $250 – $800
- Permit
- Usually no
- Typical timeline
- 3-5 days of work
Installed, local pricing
$0 – $175 in fees
3-5 days of work
Danbury runs +20% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Danbury homeowners pay around $11,400. The local adjustment for this trade is x1.202 — driven mainly by Fairfield County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 15 linear foot of cabinetry | $3,800 – $12,000 |
| 15 linear foot of cabinetry | $3,800 – $12,000 |
| 20 linear foot of cabinetry | $5,000 – $16,000 |
| 30 linear foot of cabinetry | $7,500 – $24,000 |
| 35 linear foot of cabinetry | $8,800 – $28,000 |
Based on Danbury pricing of $250–$800 per linear foot of cabinetry.
Where the money goes
- Labor
- $6,800
- 59% of median
- Materials
- $4,600
- 40% of median
- Permit & fees
- $90
- 1% of median
Danbury project costs+20% vs U.S. average
Based on Fairfield County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-5 days of work
05
Closeout
Final sign-off, warranty and documentation
Danbury labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$64–$82
Interior crews in Fairfield County · +25% vs U.S. ($58/hr)
Typical crew
3 × 4 days
On-site time for a typical cabinet refacing job here.
Labor in the price
$6,800
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Danbury wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Fairfield County labor factor (x1.247). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Danbury differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$1,400
Fairfield County crews price 25% above the national average, and labor is 60% of this job.
Material and delivery+$475
Materials are nationally traded, so they move less — but delivery into this market runs 12% over baseline.
Code and inspection load+$50
Kitchen Cabinet Refacing carries 5% exposure to local code requirements, and this jurisdiction's review load indexes at x1.09.
Basis: Decomposition of the modeled Danbury median against the U.S. median for this scope. · City of Danbury building department, Hometriva methodology
Danbury vs Connecticut vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen cabinet refacing in Danbury
$11,490
Likely range $5,490 – $24,090
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear feet of cabinetry and door count
- Veneer, thermofoil or solid wood fronts
- New soft-close hardware
- Adding crown molding or end panels
- Condition of the existing boxes
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Danbury building departmentModeled estimate |
| electrical | City of Danbury building departmentModeled estimate |
| mechanical | City of Danbury building departmentModeled estimate |
| plumbing | City of Danbury building departmentModeled estimate |
| zoning | City of Danbury building departmentModeled estimate |
| fire | City of Danbury building departmentModeled estimate |
Permit requirement in Danbury
Usually no permit is required in Danbury, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Danbury building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$175Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect kitchen cabinet refacing.
Humidity
Severe84/100
Danbury sits in Fairfield County, Connecticut. Deep frost lines, snow load and a very old housing stock mean permits frequently touch structural, electrical and energy-code upgrades at once. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per linear foot of cabinetry |
|---|---|---|---|
| Danbury (this page) | x1.202 | $11,400 | $250 – $800 |
| Bridgeport | x1.202 | $11,400 | $250 – $800 |
| Stamford | x1.202 | $11,400 | $250 – $800 |
| New Haven | x1.202 | $11,400 | $250 – $800 |
What Danbury homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Danbury
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Danbury cabinet refacing costs
Hometriva does not publish invented city prices. The Danbury estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for kitchen cabinet refacing on a single-family home.
- Local labor factorx1.247
Danbury-area trade labor rates, weighted at 60% of this job.
- Material factorx1.122
Material and delivery pricing into Fairfield County, weighted at 40%.
- Regulatory factorx1.086
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.202
Blended Danbury adjustment specific to kitchen cabinet refacing.
- Permit component$0 – $175
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Danbury carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Danbury, CT.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.