Kitchen Cabinet Refacing cost in Fort Lauderdale, FL

Fort Lauderdale, FL · updated August 2026

$11,000

Typical local cost

$5,200 – $23,200

Typical range

per linear foot of cabinetry
$250 – $750

Installed, local pricing

Permit
Usually no

$0 – $195 in fees

Typical timeline
3-5 days of work

3-5 days of work

Fort Lauderdale runs +16% against the U.S. average · data confidence Medium · modeled estimate, not a quote

The modeled midpoint for Fort Lauderdale is $11,000. The local adjustment for this trade is x1.162 — driven mainly by Broward County labor rates and 5% exposure to local code requirements.

Cost by project size

Generated from the same unit pricing the calculator uses.

Estimated cost by project size
Project sizeEstimated range
15 linear foot of cabinetry$3,800$11,300
20 linear foot of cabinetry$5,000$15,000
30 linear foot of cabinetry$7,500$22,500
35 linear foot of cabinetry$8,800$26,300

Based on Fort Lauderdale pricing of $250–$750 per linear foot of cabinetry.

Where the money goes

Labor
$6,600
59% of median
Materials
$4,400
40% of median
Permit & fees
$100
1% of median

Fort Lauderdale project costs+16% vs U.S. average

Based on Broward County labor rates, local material logistics and permit-fee posture for this trade.

What the project looks like start to finish

Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.

  1. 01

    Planning & quotes

    Scope, material choice, contractor selection

  2. 02

    Scheduling

    No permit typically required for this scope

  3. 03

    Materials & staging

    Order lead time on non-stock materials

  4. 04

    Installation

    3-5 days of work

  5. 05

    Closeout

    Final sign-off, warranty and documentation

Fort Lauderdale labor intelligence

What the trade charges here, and how much of your price it is.

Loaded hourly rate

$60–$78

Interior crews in Broward County · +18% vs U.S. ($58/hr)

Typical crew

3 × 4 days

On-site time for a typical cabinet refacing job here.

Labor in the price

$6,600

60% of the median — the rest is material, disposal and permit.

Because labor is 60% of this job, Fort Lauderdale wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.

Basis: Hometriva labor model: national interior crew rates adjusted by the Broward County labor factor (x1.182). · BLS Occupational Employment and Wage Statistics, Hometriva methodology

Why Fort Lauderdale differs from the national average

The local delta, broken into dollars by driver.

Trade labor rates$1,025Material and delivery$425Code and inspection load$75Permit fees$25
Dollars of the Fort Lauderdale difference owned by each driver, versus the U.S. median for kitchen cabinet refacing.
  • Trade labor rates+$1,025

    Broward County crews price 18% above the national average, and labor is 60% of this job.

  • Material and delivery+$425

    Materials are nationally traded, so they move less — but delivery into this market runs 11% over baseline because of coastal logistics.

  • Code and inspection load+$75

    Kitchen Cabinet Refacing carries 5% exposure to local code requirements, and this jurisdiction's review load indexes at x1.15.

  • Permit fees+$25

    Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.

Basis: Decomposition of the modeled Fort Lauderdale median against the U.S. median for this scope. · City of Fort Lauderdale Development Services, Hometriva methodology

Fort Lauderdale vs Florida vs the U.S.

Fort Lauderdale$5,200$23,200Florida average$4,700$21,000U.S. average$4,500$20,000
Modeled ranges for kitchen cabinet refacing. The tick marks the median in each geography.

Change the inputs, see your number

The same local model, run against your job instead of the average one.

Simulated kitchen cabinet refacing in Fort Lauderdale

$11,100

Likely range $5,300$23,300

Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.

What makes the number move

  • Linear feet of cabinetry and door count
  • Veneer, thermofoil or solid wood fronts
  • New soft-close hardware
  • Adding crown molding or end panels
  • Condition of the existing boxes

Who issues each permit

Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.

Permitting authority by discipline
DisciplineIssuing authority
buildingCity of Fort Lauderdale Development ServicesConfirmed department
electricalCity of Fort Lauderdale Development ServicesConfirmed department
mechanicalCity of Fort Lauderdale Development ServicesConfirmed department
plumbingCity of Fort Lauderdale Development ServicesConfirmed department
zoningCity of Fort Lauderdale Development ServicesConfirmed department
fireCity of Fort Lauderdale Development ServicesConfirmed department

Permit requirement in Fort Lauderdale

A permit is usually not required for kitchen cabinet refacing on its own. Fort Lauderdale still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.

Permitting authority
City of Fort Lauderdale Development ServicesConfirmed department
Permit fee
Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0$195.
Full Fort Lauderdale permit guide for kitchen cabinet refacing

Local conditions that change this job

Only the exposures that materially affect kitchen cabinet refacing.

Humidity

Severe84/100

Broward County is also inside the HVHZ, so wind-borne debris protection is required for most exterior work.

Nearby market comparison

MarketLocal factorMedianPer linear foot of cabinetry
Fort Lauderdale (this page)x1.162$11,000$250$750
Miamix1.204$11,400$250$800
West Palm Beachx1.139$10,800$250$750
Port St. Luciex1.034$9,800$250$650

What Fort Lauderdale homeowners actually paid

Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.

No name, email or address is collected. Reports are reviewed before they count.

Quotes homeowners were given in Fort Lauderdale

Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.

No name, email or address is collected.

How Hometriva estimates Fort Lauderdale cabinet refacing costs

Hometriva does not publish invented city prices. The Fort Lauderdale estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:

  1. National baseline$9,500

    Typical U.S. cost for kitchen cabinet refacing on a single-family home.

  2. Local labor factorx1.182

    Fort Lauderdale-area trade labor rates, weighted at 60% of this job.

  3. Material factorx1.110

    Material and delivery pricing into Broward County, weighted at 40%.

  4. Regulatory factorx1.145

    Local code, product-approval and inspection load, applied at 5% for this project type.

  5. Applied multiplierx1.162

    Blended Fort Lauderdale adjustment specific to kitchen cabinet refacing.

  6. Permit component$0 – $195

    Budgeted separately from the contract price because it is paid to the jurisdiction.

Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Fort Lauderdale carries a different local adjustment than other trades in the same market.

Reviewed by

Hometriva Cost Data Desk

Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Fort Lauderdale, FL.

  • National unit-cost baselines against current trade pricing
  • Local labor and materials factors for the market
  • Material installed-cost ranges and service life

Last reviewed August 2026 · Editorial standards · Report an error

Frequently asked questions

Is cabinet refacing worth it?

Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.

How long does kitchen cabinet refacing take?

3-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.

What changes the price the most?

The largest cost drivers are linear feet of cabinetry and door count; veneer, thermofoil or solid wood fronts; new soft-close hardware.

Sources

Sources & verification

Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.

Related pages