Kitchen Cabinet Refacing cost in Orlando, FL
Orlando, FL · updated August 2026
$9,700
Typical local cost
$4,600 – $20,500
Typical range
- per linear foot of cabinetry
- $250 – $650
- Permit
- Usually no
- Typical timeline
- 3-5 days of work
Installed, local pricing
$0 – $150 in fees
3-5 days of work
Orlando runs +2% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Orlando is $9,700. The local adjustment for this trade is x1.023 — driven mainly by Orange County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 15 linear foot of cabinetry | $3,800 – $9,800 |
| 20 linear foot of cabinetry | $5,000 – $13,000 |
| 30 linear foot of cabinetry | $7,500 – $19,500 |
| 35 linear foot of cabinetry | $8,800 – $22,800 |
Based on Orlando pricing of $250–$650 per linear foot of cabinetry.
Where the money goes
- Labor
- $5,800
- 59% of median
- Materials
- $3,900
- 40% of median
- Permit & fees
- $75
- 1% of median
Orlando project costs+2% vs U.S. average
Based on Orange County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-5 days of work
05
Closeout
Final sign-off, warranty and documentation
Orlando labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$52–$68
Interior crews in Orange County · +3% vs U.S. ($58/hr)
Typical crew
3 × 4 days
On-site time for a typical cabinet refacing job here.
Labor in the price
$5,800
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Orlando wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Orange County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Orlando differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$150
Orange County crews price 3% above the national average, and labor is 60% of this job.
Material and delivery+$50
Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline.
Basis: Decomposition of the modeled Orlando median against the U.S. median for this scope. · City of Orlando Permitting Services, Hometriva methodology
Orlando vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen cabinet refacing in Orlando
$9,775
Likely range $4,675 – $20,575
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear feet of cabinetry and door count
- Veneer, thermofoil or solid wood fronts
- New soft-close hardware
- Adding crown molding or end panels
- Condition of the existing boxes
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Orlando Permitting ServicesConfirmed department |
| electrical | City of Orlando Permitting ServicesConfirmed department |
| mechanical | City of Orlando Permitting ServicesConfirmed department |
| plumbing | City of Orlando Permitting ServicesConfirmed department |
| zoning | City of Orlando Permitting ServicesConfirmed department |
| fire | City of Orlando Permitting ServicesConfirmed department |
Permit requirement in Orlando
A permit is usually not required for kitchen cabinet refacing on its own. Orlando still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Orlando Permitting ServicesConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0–$150.
Local conditions that change this job
Only the exposures that materially affect kitchen cabinet refacing.
Humidity
Severe84/100
Orlando is inland with a 130 mph design wind speed, so opening protection requirements are lighter than South Florida.
Nearby market comparison
| Market | Local factor | Median | Per linear foot of cabinetry |
|---|---|---|---|
| Orlando (this page) | x1.023 | $9,700 | $250 – $650 |
| Kissimmee | x0.982 | $9,300 | $200 – $650 |
| Lakeland | x0.952 | $9,000 | $200 – $600 |
| Daytona Beach | x0.993 | $9,400 | $200 – $650 |
What Orlando homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Orlando
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Orlando cabinet refacing costs
Hometriva does not publish invented city prices. The Orlando estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for kitchen cabinet refacing on a single-family home.
- Local labor factorx1.026
Orlando-area trade labor rates, weighted at 60% of this job.
- Material factorx1.014
Material and delivery pricing into Orange County, weighted at 40%.
- Regulatory factorx1.037
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.023
Blended Orlando adjustment specific to kitchen cabinet refacing.
- Permit component$0 – $150
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Orlando carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Orlando, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
How long does kitchen cabinet refacing take?
3-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear feet of cabinetry and door count; veneer, thermofoil or solid wood fronts; new soft-close hardware.
Sources
Sources & verification
- City of Orlando Permitting Services
- Orlando permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.