Kitchen Cabinet Refacing cost in Pittsburgh, PA
Pittsburgh, PA · updated August 2026
$10,100
Typical local cost
$4,800 – $21,200
Typical range
- per linear foot of cabinetry
- $250 – $700
- Permit
- Usually no
- Typical timeline
- 3-5 days of work
Installed, local pricing
$0 – $160 in fees
3-5 days of work
Pittsburgh runs +6% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Pittsburgh is $10,100. The local adjustment for this trade is x1.059 — driven mainly by Allegheny County labor rates and 5% exposure to local code requirements.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 15 linear foot of cabinetry | $3,800 – $10,500 |
| 20 linear foot of cabinetry | $5,000 – $14,000 |
| 30 linear foot of cabinetry | $7,500 – $21,000 |
| 35 linear foot of cabinetry | $8,800 – $24,500 |
Based on Pittsburgh pricing of $250–$700 per linear foot of cabinetry.
Where the money goes
- Labor
- $6,100
- 60% of median
- Materials
- $4,000
- 39% of median
- Permit & fees
- $80
- 1% of median
Pittsburgh project costs+6% vs U.S. average
Based on Allegheny County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
3-5 days of work
05
Closeout
Final sign-off, warranty and documentation
Pittsburgh labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$54–$70
Interior crews in Allegheny County · +6% vs U.S. ($58/hr)
Typical crew
3 × 4 days
On-site time for a typical cabinet refacing job here.
Labor in the price
$6,100
60% of the median — the rest is material, disposal and permit.
Because labor is 60% of this job, Pittsburgh wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Allegheny County labor factor (x1.065). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Pittsburgh differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$375
Allegheny County crews price 6% above the national average, and labor is 60% of this job.
Material and delivery+$150
Materials are nationally traded, so they move less — but delivery into this market runs 4% over baseline.
Basis: Decomposition of the modeled Pittsburgh median against the U.S. median for this scope. · City of Pittsburgh building department, Hometriva methodology
Pittsburgh vs Pennsylvania vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated kitchen cabinet refacing in Pittsburgh
$10,180
Likely range $4,880 – $21,280
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Linear feet of cabinetry and door count
- Veneer, thermofoil or solid wood fronts
- New soft-close hardware
- Adding crown molding or end panels
- Condition of the existing boxes
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Pittsburgh building departmentModeled estimate |
| electrical | City of Pittsburgh building departmentModeled estimate |
| mechanical | City of Pittsburgh building departmentModeled estimate |
| plumbing | City of Pittsburgh building departmentModeled estimate |
| zoning | City of Pittsburgh building departmentModeled estimate |
| fire | City of Pittsburgh building departmentModeled estimate |
Permit requirement in Pittsburgh
A permit is usually not required for kitchen cabinet refacing on its own. Pittsburgh still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Pittsburgh building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$160Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect kitchen cabinet refacing.
Humidity
High66/100
Nearby market comparison
| Market | Local factor | Median | Per linear foot of cabinetry |
|---|---|---|---|
| Pittsburgh (this page) | x1.059 | $10,100 | $250 – $700 |
| Wheeling | x0.854 | $8,100 | $200 – $550 |
| Youngstown | x0.906 | $8,600 | $200 – $600 |
| Morgantown | x0.854 | $8,100 | $200 – $550 |
What Pittsburgh homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Pittsburgh
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Pittsburgh cabinet refacing costs
Hometriva does not publish invented city prices. The Pittsburgh estimate for kitchen cabinet refacing is produced by this chain, and every input is stored separately:
- National baseline$9,500
Typical U.S. cost for kitchen cabinet refacing on a single-family home.
- Local labor factorx1.065
Pittsburgh-area trade labor rates, weighted at 60% of this job.
- Material factorx1.042
Material and delivery pricing into Allegheny County, weighted at 40%.
- Regulatory factorx1.052
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.059
Blended Pittsburgh adjustment specific to kitchen cabinet refacing.
- Permit component$0 – $160
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, kitchen cabinet refacing in Pittsburgh carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for kitchen cabinet refacing pricing in Pittsburgh, PA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Is cabinet refacing worth it?
Refacing makes sense when the existing boxes are solid and the layout works. If the boxes are particleboard that has swollen from moisture, or you want to change the layout, full replacement is the better value.
How long does kitchen cabinet refacing take?
3-5 days of work. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are linear feet of cabinetry and door count; veneer, thermofoil or solid wood fronts; new soft-close hardware.
Sources
Sources & verification
- City of Pittsburgh building department
- Pittsburgh permit portal
- Pennsylvania Department of Labor and Industry
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.