Countertop Replacement cost in Tempe, AZ
Tempe, AZ · updated August 2026
$4,900
Typical local cost
$2,300 – $12,300
Typical range
- per sq ft installed
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1 day of installation
Installed, local pricing
$0 – $145 in fees
1 day of installation, 2-3 weeks after templating
Tempe runs +3% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Tempe homeowners pay around $4,900. The local adjustment for this trade is x1.028 — driven mainly by Maricopa County labor rates and 5% exposure to local code requirements.
Estimate your Tempe job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 30 sq ft installed | $1,500 – $4,500 |
| 40 sq ft installed | $2,000 – $6,000 |
| 50 sq ft installed | $2,500 – $7,500 |
| 60 sq ft installed | $3,000 – $9,000 |
| 80 sq ft installed | $4,000 – $12,000 |
Based on Tempe pricing of $50–$150 per sq ft installed.
Where the money goes
- Labor
- $1,700
- 34% of median
- Materials
- $3,200
- 64% of median
- Permit & fees
- $75
- 2% of median
Tempe project costs+3% vs U.S. average
Based on Maricopa County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of installation, 2-3 weeks after templating
05
Closeout
Final sign-off, warranty and documentation
Tempe labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$52–$68
Interior crews in Maricopa County · +3% vs U.S. ($58/hr)
Typical crew
2 × 2 days
On-site time for a typical countertops job here.
Labor in the price
$1,700
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Tempe wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Maricopa County labor factor (x1.026). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Tempe differs from the national average
The local delta, broken into dollars by driver.
Material and delivery+$75
Materials are nationally traded, so they move less — but delivery into this market runs 3% over baseline.
Trade labor rates+$50
Maricopa County crews price 3% above the national average, and labor is 35% of this job.
Basis: Decomposition of the modeled Tempe median against the U.S. median for this scope. · City of Tempe building department, Hometriva methodology
Tempe vs Arizona vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated countertop replacement in Tempe
$4,975
Likely range $2,375 – $12,375
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and number of slabs
- Material: laminate, quartz, granite or porcelain
- Edge profile and cutouts
- Backsplash included
- Sink and faucet reconnection
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Tempe building departmentModeled estimate |
| electrical | City of Tempe building departmentModeled estimate |
| mechanical | City of Tempe building departmentModeled estimate |
| plumbing | City of Tempe building departmentModeled estimate |
| zoning | City of Tempe building departmentModeled estimate |
| fire | City of Tempe building departmentModeled estimate |
Permit requirement in Tempe
Usually no permit is required in Tempe, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Tempe building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$145Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect countertop replacement.
Humidity
Severe84/100
Tempe sits in Maricopa County, Arizona. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
What Tempe homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Tempe
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Tempe countertops costs
Hometriva does not publish invented city prices. The Tempe estimate for countertop replacement is produced by this chain, and every input is stored separately:
- National baseline$4,800
Typical U.S. cost for countertop replacement on a single-family home.
- Local labor factorx1.026
Tempe-area trade labor rates, weighted at 35% of this job.
- Material factorx1.027
Material and delivery pricing into Maricopa County, weighted at 65%.
- Regulatory factorx1.036
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.028
Blended Tempe adjustment specific to countertop replacement.
- Permit component$0 – $145
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, countertop replacement in Tempe carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for countertop replacement pricing in Tempe, AZ.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Quartz or granite in a Florida kitchen?
Quartz is non-porous and needs no sealing, which suits humid Florida kitchens. Granite handles heat better and each slab is unique, but it needs resealing every one to three years.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.