Countertop Replacement cost in Irvine, CA
Irvine, CA · updated August 2026
$6,200
Typical local cost
$2,800 – $15,500
Typical range
- per sq ft installed
- $50 – $200
- Permit
- Usually no
- Typical timeline
- 1 day of installation
Installed, local pricing
$0 – $220 in fees
1 day of installation, 2-3 weeks after templating
Irvine runs +29% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Irvine is $6,200. The local adjustment for this trade is x1.292 — driven mainly by Orange County labor rates and 5% exposure to local code requirements.
Estimate your Irvine job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Irvine (local adjustment x1.292).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 30 sq ft installed | $1,500 – $6,000 |
| 40 sq ft installed | $2,000 – $8,000 |
| 50 sq ft installed | $2,500 – $10,000 |
| 60 sq ft installed | $3,000 – $12,000 |
| 80 sq ft installed | $4,000 – $16,000 |
Based on Irvine pricing of $50–$200 per sq ft installed.
Where the money goes
- Labor
- $2,200
- 35% of median
- Materials
- $4,000
- 63% of median
- Permit & fees
- $110
- 2% of median
Irvine project costs+29% vs U.S. average
Based on Orange County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of installation, 2-3 weeks after templating
05
Closeout
Final sign-off, warranty and documentation
Irvine labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$73–$94
Interior crews in Orange County · +43% vs U.S. ($58/hr)
Typical crew
2 × 1.5 days
On-site time for a typical countertops job here.
Labor in the price
$2,200
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Irvine wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Orange County labor factor (x1.429). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Irvine differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$725
Orange County crews price 43% above the national average, and labor is 35% of this job.
Material and delivery+$625
Materials are nationally traded, so they move less — but delivery into this market runs 20% over baseline.
Code and inspection load+$50
Countertop Replacement carries 5% exposure to local code requirements, and this jurisdiction's review load indexes at x1.18.
Permit fees+$25
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled Irvine median against the U.S. median for this scope. · City of Irvine Building & Safety Division, Hometriva methodology
Irvine vs California vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated countertop replacement in Irvine
$6,310
Likely range $2,910 – $15,610
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and number of slabs
- Material: laminate, quartz, granite or porcelain
- Edge profile and cutouts
- Backsplash included
- Sink and faucet reconnection
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Irvine Building & Safety DivisionConfirmed department |
| electrical | City of Irvine Building & Safety DivisionConfirmed department |
| mechanical | City of Irvine Building & Safety DivisionConfirmed department |
| plumbing | City of Irvine Building & Safety DivisionConfirmed department |
| zoning | City of Irvine Building & Safety DivisionConfirmed department |
| fire | City of Irvine Building & Safety DivisionConfirmed department |
Permit requirement in Irvine
A permit is usually not required for countertop replacement on its own. Irvine still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Irvine Building & Safety DivisionConfirmed department
- Permit fee
- Based on declared project valuationSee the department's adopted fee schedule. Typical range for this scope: $0–$220.
Local conditions that change this job
Only the exposures that materially affect countertop replacement.
Humidity
Severe84/100
Irvine sits in Orange County, California. Seismic bracing, energy-code (Title 24) compliance and coastal exposure all factor into permit scope and material selection. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Irvine (this page) | x1.292 | $6,200 | $50 – $200 |
| Santa Ana | x1.292 | $6,200 | $50 – $200 |
| Anaheim | x1.292 | $6,200 | $50 – $200 |
| Huntington Beach | x1.292 | $6,200 | $50 – $200 |
+ Had countertop replacement done in Irvine? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates Irvine countertops costs
Hometriva does not publish invented city prices. The Irvine estimate for countertop replacement is produced by this chain, and every input is stored separately:
- National baseline$4,800
Typical U.S. cost for countertop replacement on a single-family home.
- Local labor factorx1.429
Irvine-area trade labor rates, weighted at 35% of this job.
- Material factorx1.200
Material and delivery pricing into Orange County, weighted at 65%.
- Regulatory factorx1.182
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.292
Blended Irvine adjustment specific to countertop replacement.
- Permit component$0 – $220
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, countertop replacement in Irvine carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for countertop replacement pricing in Irvine, CA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does countertop replacement take?
1 day of installation, 2-3 weeks after templating. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are square footage and number of slabs; material: laminate, quartz, granite or porcelain; edge profile and cutouts.
Sources
Sources & verification
- City of Irvine Building & Safety Division
- California Building Standards Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.