Countertop Replacement cost in Venice, FL
Venice, FL · updated August 2026
$5,100
Typical local cost
$2,400 – $12,900
Typical range
- per sq ft installed
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1 day of installation
Installed, local pricing
$0 – $160 in fees
1 day of installation, 2-3 weeks after templating
Venice runs +7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
The modeled midpoint for Venice is $5,100. The local adjustment for this trade is x1.072 — driven mainly by Sarasota County labor rates and 5% exposure to local code requirements.
Estimate your Venice job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Priced for Venice (local adjustment x1.072).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 30 sq ft installed | $1,500 – $4,500 |
| 40 sq ft installed | $2,000 – $6,000 |
| 50 sq ft installed | $2,500 – $7,500 |
| 60 sq ft installed | $3,000 – $9,000 |
| 80 sq ft installed | $4,000 – $12,000 |
Based on Venice pricing of $50–$150 per sq ft installed.
Where the money goes
- Labor
- $1,800
- 35% of median
- Materials
- $3,300
- 64% of median
- Permit & fees
- $80
- 2% of median
Venice project costs+7% vs U.S. average
Based on Sarasota County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of installation, 2-3 weeks after templating
05
Closeout
Final sign-off, warranty and documentation
Venice labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$55–$71
Interior crews in Sarasota County · +8% vs U.S. ($58/hr)
Typical crew
2 × 2 days
On-site time for a typical countertops job here.
Labor in the price
$1,800
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Venice wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Sarasota County labor factor (x1.078). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Venice differs from the national average
The local delta, broken into dollars by driver.
Material and delivery+$200
Materials are nationally traded, so they move less — but delivery into this market runs 6% over baseline because of coastal logistics.
Trade labor rates+$125
Sarasota County crews price 8% above the national average, and labor is 35% of this job.
Basis: Decomposition of the modeled Venice median against the U.S. median for this scope. · City of Venice building department, Hometriva methodology
Venice vs Florida vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated countertop replacement in Venice
$5,180
Likely range $2,480 – $12,980
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and number of slabs
- Material: laminate, quartz, granite or porcelain
- Edge profile and cutouts
- Backsplash included
- Sink and faucet reconnection
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Venice building departmentModeled estimate |
| electrical | City of Venice building departmentModeled estimate |
| mechanical | City of Venice building departmentModeled estimate |
| plumbing | City of Venice building departmentModeled estimate |
| zoning | City of Venice building departmentModeled estimate |
| fire | City of Venice building departmentModeled estimate |
Permit requirement in Venice
A permit is usually not required for countertop replacement on its own. Venice still applies zoning rules such as setbacks, lot coverage and HOA approval, and any structural, electrical or plumbing work added to the job does need a permit.
- Permitting authority
- City of Venice building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$160Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect countertop replacement.
Humidity
Severe84/100
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Venice (this page) | x1.072 | $5,100 | $50 – $150 |
| Sarasota | x1.089 | $5,200 | $50 – $150 |
| Port Charlotte | x1.020 | $4,900 | $50 – $150 |
| Bradenton | x1.063 | $5,100 | $50 – $150 |
What Venice homeowners actually paid
Homeowner-reported invoices for this market. Nothing is published until enough reports clear review, so this section is often empty in newer markets — adding yours takes 20 seconds and no personal details.
Quotes homeowners were given in Venice
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Venice countertops costs
Hometriva does not publish invented city prices. The Venice estimate for countertop replacement is produced by this chain, and every input is stored separately:
- National baseline$4,800
Typical U.S. cost for countertop replacement on a single-family home.
- Local labor factorx1.078
Venice-area trade labor rates, weighted at 35% of this job.
- Material factorx1.063
Material and delivery pricing into Sarasota County, weighted at 65%.
- Regulatory factorx1.074
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx1.072
Blended Venice adjustment specific to countertop replacement.
- Permit component$0 – $160
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, countertop replacement in Venice carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for countertop replacement pricing in Venice, FL.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Quartz or granite in a Florida kitchen?
Quartz is non-porous and needs no sealing, which suits humid Florida kitchens. Granite handles heat better and each slab is unique, but it needs resealing every one to three years.
How long does countertop replacement take?
1 day of installation, 2-3 weeks after templating. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are square footage and number of slabs; material: laminate, quartz, granite or porcelain; edge profile and cutouts.
Sources
Sources & verification
- City of Venice building department
- Venice permit portal
- Florida Building Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.