Countertop Replacement cost in Kansas City, KS
Kansas City, KS · updated August 2026
$4,500
Typical local cost
$2,000 – $11,100
Typical range
- per sq ft installed
- $50 – $150
- Permit
- Usually no
- Typical timeline
- 1 day of installation
Installed, local pricing
$0 – $130 in fees
1 day of installation, 2-3 weeks after templating
Kansas City runs -7% against the U.S. average · data confidence Medium · modeled estimate, not a quote
Most Kansas City homeowners pay around $4,500. The local adjustment for this trade is x0.928 — driven mainly by Wyandotte County labor rates and 5% exposure to local code requirements.
Estimate your Kansas City job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Square footage
180 sq ft
- With waste allowance
- 198 sq ft
- Square yards
- 20
- Perimeter (per area)
- 54 ft
- Square meters
- 16.72
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 30 sq ft installed | $1,500 – $4,500 |
| 40 sq ft installed | $2,000 – $6,000 |
| 50 sq ft installed | $2,500 – $7,500 |
| 60 sq ft installed | $3,000 – $9,000 |
| 80 sq ft installed | $4,000 – $12,000 |
Based on Kansas City pricing of $50–$150 per sq ft installed.
Where the money goes
- Labor
- $1,600
- 35% of median
- Materials
- $2,900
- 64% of median
- Permit & fees
- $65
- 1% of median
Kansas City project costs-7% vs U.S. average
Based on Wyandotte County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Scheduling
No permit typically required for this scope
03
Materials & staging
Order lead time on non-stock materials
04
Installation
1 day of installation, 2-3 weeks after templating
05
Closeout
Final sign-off, warranty and documentation
Kansas City labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$44–$58
Interior crews in Wyandotte County · -13% vs U.S. ($58/hr)
Typical crew
2 × 2 days
On-site time for a typical countertops job here.
Labor in the price
$1,600
35% of the median — the rest is material, disposal and permit.
Because labor is 35% of this job, Kansas City wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national interior crew rates adjusted by the Wyandotte County labor factor (x0.870). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why Kansas City differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates-$225
Wyandotte County crews price 13% below the national average, and labor is 35% of this job.
Material and delivery-$125
Materials are nationally traded, so they move less — but delivery into this market runs 4% under baseline.
Basis: Decomposition of the modeled Kansas City median against the U.S. median for this scope. · City of Kansas City building department, Hometriva methodology
Kansas City vs Kansas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated countertop replacement in Kansas City
$4,565
Likely range $2,065 – $11,165
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and number of slabs
- Material: laminate, quartz, granite or porcelain
- Edge profile and cutouts
- Backsplash included
- Sink and faucet reconnection
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of Kansas City building departmentModeled estimate |
| electrical | City of Kansas City building departmentModeled estimate |
| mechanical | City of Kansas City building departmentModeled estimate |
| plumbing | City of Kansas City building departmentModeled estimate |
| zoning | City of Kansas City building departmentModeled estimate |
| fire | City of Kansas City building departmentModeled estimate |
Permit requirement in Kansas City
Usually no permit is required in Kansas City, but zoning rules such as setbacks and HOA approval can still apply.
- Permitting authority
- City of Kansas City building departmentModeled estimate
- Permit fee
- Estimated allowance $0–$130Modeled from comparable fee schedules — not an official quoted fee.
Local conditions that change this job
Only the exposures that materially affect countertop replacement.
Humidity
Severe84/100
Kansas City sits in Wyandotte County, Kansas. Freeze-thaw cycling, frost-depth footings and an older housing stock keep foundation, sewer and window work in steady rotation. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft installed |
|---|---|---|---|
| Kansas City (this page) | x0.928 | $4,500 | $50 – $150 |
| Overland Park | x0.928 | $4,500 | $50 – $150 |
| Olathe | x0.912 | $4,400 | $50 – $150 |
| Topeka | x0.912 | $4,400 | $50 – $150 |
What Kansas City homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in Kansas City
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates Kansas City countertops costs
Hometriva does not publish invented city prices. The Kansas City estimate for countertop replacement is produced by this chain, and every input is stored separately:
- National baseline$4,800
Typical U.S. cost for countertop replacement on a single-family home.
- Local labor factorx0.870
Kansas City-area trade labor rates, weighted at 35% of this job.
- Material factorx0.960
Material and delivery pricing into Wyandotte County, weighted at 65%.
- Regulatory factorx0.998
Local code, product-approval and inspection load, applied at 5% for this project type.
- Applied multiplierx0.928
Blended Kansas City adjustment specific to countertop replacement.
- Permit component$0 – $130
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, countertop replacement in Kansas City carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for countertop replacement pricing in Kansas City, KS.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Quartz or granite in a Florida kitchen?
Quartz is non-porous and needs no sealing, which suits humid Florida kitchens. Granite handles heat better and each slab is unique, but it needs resealing every one to three years.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.