Driveway Replacement cost in San Francisco, CA
San Francisco, CA · updated August 2026
$12,800
Typical local cost
$6,200 – $28,200
Typical range
- per sq ft of driveway
- $9 – $32.50
- Permit
- Usually yes
- Typical timeline
- 2-4 days of work plus 7 days of concrete cure
Installed, local pricing
$125 – $550 in fees
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total
San Francisco runs +49% against the U.S. average · data confidence High · modeled estimate, not a quote
The modeled midpoint for San Francisco is $12,800. The local adjustment for this trade is x1.486 — driven mainly by San Francisco County labor rates and 40% exposure to local code requirements.
Estimate your San Francisco job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$10,343 – $15,217
- Cost per square foot
- $18 – $25
- Demolition
- $2,675
- Concrete volume (5 in)
- 9.3 cubic yards
Priced for San Francisco (local adjustment x1.486).
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 400 sq ft of driveway | $3,600 – $13,000 |
| 500 sq ft of driveway | $4,500 – $16,300 |
| 600 sq ft of driveway | $5,400 – $19,500 |
| 800 sq ft of driveway | $7,200 – $26,000 |
| 1,000 sq ft of driveway | $9,000 – $32,500 |
Based on San Francisco pricing of $9–$33 per sq ft of driveway.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Poured Concrete Driveway | $10,200 – $16,600 | 25–40 yrs | Low |
| Paver Driveway | $16,000 – $26,900 | 30–50 yrs | Moderate |
| Asphalt Driveway | $7,000 – $11,500 | 15–25 yrs | High |
Where the money goes
- Labor
- $7,400
- 56% of median
- Materials
- $5,400
- 41% of median
- Permit & fees
- $340
- 3% of median
San Francisco project costs+49% vs U.S. average
Based on San Francisco County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with San Francisco Department of Building Inspection
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total
05
Inspection
Form / subgrade inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
San Francisco labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$81–$105
Outdoor crews in San Francisco County · +48% vs U.S. ($62/hr)
Typical crew
3 × 3.5 days
On-site time for a typical driveway job here.
Labor in the price
$7,400
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, San Francisco wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the San Francisco County labor factor (x1.481). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why San Francisco differs from the national average
The local delta, broken into dollars by driver.
Trade labor rates+$2,400
San Francisco County crews price 48% above the national average, and labor is 58% of this job.
Material and delivery+$800
Materials are nationally traded, so they move less — but delivery into this market runs 22% over baseline.
Code and inspection load+$725
Driveway Replacement carries 40% exposure to local code requirements, and this jurisdiction's review load indexes at x1.21.
Permit fees+$125
Fees are paid to the jurisdiction, not the contractor, and are budgeted separately from the contract price.
Basis: Decomposition of the modeled San Francisco median against the U.S. median for this scope. · San Francisco Department of Building Inspection, Hometriva methodology
San Francisco vs California vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated driveway replacement in San Francisco
$13,140
Likely range $6,540 – $28,540
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and thickness
- Concrete versus pavers versus asphalt
- Demolition and haul-off of the old surface
- Base preparation and drainage
- Apron work in the public right-of-way
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | San Francisco Department of Building InspectionConfirmed department |
| electrical | San Francisco Department of Building InspectionConfirmed department |
| mechanical | San Francisco Department of Building InspectionConfirmed department |
| plumbing | San Francisco Department of Building InspectionConfirmed department |
| zoning | San Francisco Department of Building InspectionConfirmed department |
| fire | San Francisco Department of Building InspectionConfirmed department |
Permit requirement in San Francisco
In most cases yes — San Francisco County and the City of San Francisco generally require a permit for driveway replacement. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- San Francisco Department of Building InspectionConfirmed department
- Permit fee
- Based on declared project valuationSan Francisco is a consolidated city and county; DBI issues and inspects building permits citywide. Typical range for this scope: $125–$550.
Inspections
- Form / subgrade inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect driveway replacement.
Cooling load / heat exposure
Severe82/100
Freeze-thaw cycles
Minimal4/100
Annual rainfall
High74/100
San Francisco sits in San Francisco County, California. Seismic bracing, energy-code (Title 24) compliance and coastal exposure all factor into permit scope and material selection. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
+ Had driveway replacement done in San Francisco? Add what you paid or were quoted
Reports are reviewed before they count, and nothing is published until at least 5 reports exist for a market. No name, email or address is collected.
How Hometriva estimates San Francisco driveway costs
Hometriva does not publish invented city prices. The San Francisco estimate for driveway replacement is produced by this chain, and every input is stored separately:
- National baseline$8,600
Typical U.S. cost for driveway replacement on a single-family home.
- Local labor factorx1.481
San Francisco-area trade labor rates, weighted at 58% of this job.
- Material factorx1.222
Material and delivery pricing into San Francisco County, weighted at 42%.
- Regulatory factorx1.208
Local code, product-approval and inspection load, applied at 40% for this project type.
- Applied multiplierx1.486
Blended San Francisco adjustment specific to driveway replacement.
- Permit component$125 – $550
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, driveway replacement in San Francisco carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for driveway replacement pricing in San Francisco, CA.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
How long does driveway replacement take?
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total. Permit review and inspection scheduling are usually the largest source of variation.
What changes the price the most?
The largest cost drivers are square footage and thickness; concrete versus pavers versus asphalt; demolition and haul-off of the old surface.
Sources
Sources & verification
- San Francisco Department of Building Inspection
- California Building Standards Commission
- BLS Occupational Employment and Wage Statistics
Model vintage August 2026. The links above are the issuing agencies' own pages — we publish them so you can confirm the current rule yourself, not as evidence that each fact on this page was re-checked with them today. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing, not quotes. Permit rules change; confirm with the building department before starting work.