Driveway Replacement cost in El Paso, TX
El Paso, TX · updated August 2026
$8,700
Typical local cost
$4,300 – $19,300
Typical range
- per sq ft of driveway
- $6 – $22.50
- Permit
- Usually yes
- Typical timeline
- 2-4 days of work plus 7 days of concrete cure
Installed, local pricing
$80 – $355 in fees
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total
El Paso runs +2% against the U.S. average · data confidence High · modeled estimate, not a quote
Most El Paso homeowners pay around $8,700. The local adjustment for this trade is x1.016 — driven mainly by El Paso County labor rates and 40% exposure to local code requirements.
Estimate your El Paso job
Priced with this market's cost index, so the calculator, the size table and the ranges on this page all agree.
Estimated total cost
$6,612 – $9,728
- Cost per square foot
- $11 – $16
- Demolition
- $1,710
- Concrete volume (5 in)
- 9.3 cubic yards
Estimates only. Local pricing, site conditions and code requirements change the real number.
Cost by project size
Generated from the same unit pricing the calculator uses.
| Project size | Estimated range |
|---|---|
| 400 sq ft of driveway | $2,400 – $9,000 |
| 500 sq ft of driveway | $3,000 – $11,300 |
| 600 sq ft of driveway | $3,600 – $13,500 |
| 800 sq ft of driveway | $4,800 – $18,000 |
| 1,000 sq ft of driveway | $6,000 – $22,500 |
Based on El Paso pricing of $6–$23 per sq ft of driveway.
Cost by material
Installed cost in this market, with expected service life.
| Material | Installed range | Lifespan | Maintenance |
|---|---|---|---|
| Poured Concrete Driveway | $7,000 – $11,300 | 25–40 yrs | Low |
| Paver Driveway | $10,900 – $18,300 | 30–50 yrs | Moderate |
| Asphalt Driveway | $4,800 – $7,800 | 15–25 yrs | High |
Where the money goes
- Labor
- $5,000
- 56% of median
- Materials
- $3,700
- 41% of median
- Permit & fees
- $220
- 2% of median
El Paso project costs+2% vs U.S. average
Based on El Paso County labor rates, local material logistics and permit-fee posture for this trade.
What the project looks like start to finish
Typical sequence for this scope. Timing varies with contractor backlog and plan-review queues.
01
Planning & quotes
Scope, material choice, contractor selection
02
Permit application
Filed with City of El Paso building department
03
Materials & staging
Order lead time on non-stock materials
04
Installation
2-4 days of work plus 7 days of concrete cure, 2-5 weeks total
05
Inspection
Form / subgrade inspection, Final inspection
06
Closeout
Final sign-off, warranty and documentation
El Paso labor intelligence
What the trade charges here, and how much of your price it is.
Loaded hourly rate
$54–$70
Outdoor crews in El Paso County · -1% vs U.S. ($62/hr)
Typical crew
3 × 3.5 days
On-site time for a typical driveway job here.
Labor in the price
$5,000
58% of the median — the rest is material, disposal and permit.
Because labor is 58% of this job, El Paso wage levels move the price far more than material prices do. A quote well under this labor figure usually means a smaller crew, a longer schedule, or unlicensed help.
Basis: Hometriva labor model: national outdoor crew rates adjusted by the El Paso County labor factor (x0.987). · BLS Occupational Employment and Wage Statistics, Hometriva methodology
Why El Paso differs from the national average
The local delta, broken into dollars by driver.
Code and inspection load+$175
Driveway Replacement carries 40% exposure to local code requirements, and this jurisdiction's review load indexes at x1.05.
Trade labor rates-$75
El Paso County crews price 1% below the national average, and labor is 58% of this job.
Material and delivery+$25
Materials are nationally traded, so they move less — but delivery into this market runs 1% over baseline.
Basis: Decomposition of the modeled El Paso median against the U.S. median for this scope. · City of El Paso building department, Hometriva methodology
El Paso vs Texas vs the U.S.
Change the inputs, see your number
The same local model, run against your job instead of the average one.
Simulated driveway replacement in El Paso
$8,920
Likely range $4,520 – $19,520
Simulated from the same local model as the numbers above — it changes the inputs, not the pricing method.
What makes the number move
- Square footage and thickness
- Concrete versus pavers versus asphalt
- Demolition and haul-off of the old surface
- Base preparation and drainage
- Apron work in the public right-of-way
Who issues each permit
Tracked per discipline — the building permit issuer is not always the body that reviews electrical, plumbing, zoning or fire.
| Discipline | Issuing authority |
|---|---|
| building | City of El Paso building departmentModeled estimate |
| electrical | City of El Paso building departmentModeled estimate |
| mechanical | City of El Paso building departmentModeled estimate |
| plumbing | City of El Paso building departmentModeled estimate |
| zoning | City of El Paso building departmentModeled estimate |
| fire | City of El Paso building departmentModeled estimate |
Permit requirement in El Paso
In most cases yes — El Paso County and the City of El Paso generally require a permit for driveway replacement. Height, size and location on the lot determine the exact review, so confirm with the building department before you start.
- Permitting authority
- City of El Paso building departmentModeled estimate
- Permit fee
- Estimated allowance $80–$355Modeled from comparable fee schedules — not an official quoted fee.
Inspections
- Form / subgrade inspection
- Final inspection
Local conditions that change this job
Only the exposures that materially affect driveway replacement.
Cooling load / heat exposure
Severe82/100
Freeze-thaw cycles
Minimal4/100
Annual rainfall
High74/100
El Paso sits in El Paso County, Texas. Extreme summer heat and high UV load shorten roof membrane, exterior paint and HVAC service life, so replacement cycles run shorter than the national average. Work outside city limits is permitted by the county building department rather than the city.
Nearby market comparison
| Market | Local factor | Median | Per sq ft of driveway |
|---|---|---|---|
| El Paso (this page) | x1.016 | $8,700 | $6 – $22.50 |
| Arlington | x1.016 | $8,700 | $6 – $22.50 |
| Corpus Christi | x0.991 | $8,500 | $6 – $22 |
| Plano | x0.991 | $8,500 | $6 – $22 |
What El Paso homeowners actually paid
Real reported invoices from this market, aggregated. Add yours — it takes 20 seconds and no personal details.
Quotes homeowners were given in El Paso
Quotes run ahead of final invoices. Reporting yours shows the local spread and where there is room to negotiate.
How Hometriva estimates El Paso driveway costs
Hometriva does not publish invented city prices. The El Paso estimate for driveway replacement is produced by this chain, and every input is stored separately:
- National baseline$8,600
Typical U.S. cost for driveway replacement on a single-family home.
- Local labor factorx0.987
El Paso-area trade labor rates, weighted at 58% of this job.
- Material factorx1.010
Material and delivery pricing into El Paso County, weighted at 42%.
- Regulatory factorx1.048
Local code, product-approval and inspection load, applied at 40% for this project type.
- Applied multiplierx1.016
Blended El Paso adjustment specific to driveway replacement.
- Permit component$80 – $355
Budgeted separately from the contract price because it is paid to the jurisdiction.
Because labor, material and regulatory factors are weighted per project, driveway replacement in El Paso carries a different local adjustment than other trades in the same market.
Reviewed by
Hometriva Cost Data Desk
Maintains the unit-cost baselines, local adjustment factors and material pricing. Reviewed for driveway replacement pricing in El Paso, TX.
- • National unit-cost baselines against current trade pricing
- • Local labor and materials factors for the market
- • Material installed-cost ranges and service life
Last reviewed August 2026 · Editorial standards · Report an error
Frequently asked questions
Do I need a permit to replace a driveway?
Most Florida cities require a permit for driveway replacement or expansion because of impervious surface limits and stormwater rules. Work touching the apron in the right-of-way usually needs a separate right-of-way permit.
Sources
Sources & verification
Last verified August 2026. Cost figures are modeled estimates based on national baselines adjusted for local labor and material pricing — they are not quotes. Permit rules change; confirm with the building department before starting work.